scholarly journals Optimal Control of a Spark Ignition Engine Including Cold Start Operations for Consumption/Emissions Compromises

2021 ◽  
Vol 11 (3) ◽  
pp. 971
Author(s):  
Bruno Jeanneret ◽  
Alice Guille Des Buttes ◽  
Jérémy Pelluet ◽  
Alan Keromnes ◽  
Serge Pélissier ◽  
...  
Keyword(s):  
Optimal Control ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Empirical Modeling ◽  
Intake Manifold ◽  
Operating Parameters ◽  
Emission Models ◽  
Intake Manifold Pressure ◽  
Semi Empirical

This study presents a semi-empirical modeling approach based on an extensive parametric study using a spark-ignition port-injection engine. The experimental results are used to derive engine-out emission models for each regulated pollutant (CO, HC, NOx) as a function of engine operating parameters. Such parameters include engine speed, intake manifold pressure, equivalence ratio, and spark advance. The proposed models provide accurate predictions over a large range of engine operating conditions. The adequate accuracy and low computational burden of the models are promising in the context of optimal control theory. Dynamic programming is applied in order to find the best operating parameters that define trade-off between fuel consumption and emissions over driving cycles.

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

2019 ◽  
Author(s):  
Jinlong Liu ◽  
Cosmin E. Dumitrescu ◽  
Hemanth Bommisetty
Keyword(s):  
Natural Gas ◽  
Equivalence Ratio ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Spark Ignition ◽  
High Energy ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Intake Manifold ◽  
Spark Timing

Abstract The conversion of existing internal combustion engines to natural-gas operation can reduce U.S. dependence on petroleum imports and curtail engine-out emissions. In this study, a diesel engine with a 13.3 compression ratio was modified to natural-gas spark-ignited operation by replacing the original diesel injector with a high-energy spark plug and by fumigating fuel inside the intake manifold. The goal of this research was to investigate the combustion process inside the flat-head and bowl-in-piston chamber of such retrofitted engine when operated at different spark timings, mixture equivalence ratios, and engine speeds. The results indicated that advanced spark timing, a lower equivalence ratio, and a higher speed operation increased the ignition lag and made it more difficult to initiate the combustion process. Further, advanced spark timing, a larger equivalence ratio, and a lower speed operation accelerated the flame propagation process inside the piston bowl and advanced the start of the burn inside the squish. However, such conditions increased the burning duration inside the squish due to more fuel being trapped inside the squish volume and the smaller squish height during combustion. As a result, the end of combustion was almost the same despite the change in the operating conditions. In addition, the reliable ignition, stable combustion, and the lack of knocking showed promise for the application of natural-gas lean-burn spark-ignition operation in the heavy-duty transportation.

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

Prediction of gaseous pollutant emissions from a spark-ignition direct-injection engine with gas-exchange simulation

2021 ◽  
pp. 146808742110050
Author(s):  
Stefania Esposito ◽  
Lutz Diekhoff ◽  
Stefan Pischinger
Keyword(s):  
Gas Exchange ◽  
Combustion Chamber ◽  
Direct Injection ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Operating Parameters ◽  
Gaseous Pollutant ◽  
Fuel Ratio ◽  
No Emissions

With the further tightening of emission regulations and the introduction of real driving emission tests (RDE), the simulative prediction of emissions is becoming increasingly important for the development of future low-emission internal combustion engines. In this context, gas-exchange simulation can be used as a powerful tool for the evaluation of new design concepts. However, the simplified description of the combustion chamber can make the prediction of complex in-cylinder phenomena like emission formation quite challenging. The present work focuses on the prediction of gaseous pollutants from a spark-ignition (SI) direct injection (DI) engine with 1D–0D gas-exchange simulations. The accuracy of the simulative prediction regarding gaseous pollutant emissions is assessed based on the comparison with measurement data obtained with a research single cylinder engine (SCE). Multiple variations of engine operating parameters – for example, load, speed, air-to-fuel ratio, valve timing – are taken into account to verify the predictivity of the simulation toward changing engine operating conditions. Regarding the unburned hydrocarbon (HC) emissions, phenomenological models are used to estimate the contribution of the piston top-land crevice as well as flame wall-quenching and oil-film fuel adsorption-desorption mechanisms. Regarding CO and NO emissions, multiple approaches to describe the burned zone kinetics in combination with a two-zone 0D combustion chamber model are evaluated. In particular, calculations with reduced reaction kinetics are compared with simplified kinetic descriptions. At engine warm operation, the HC models show an accuracy mainly within 20%. The predictions for the NO emissions follow the trend of the measurements with changing engine operating parameters and all modeled results are mainly within ±20%. Regarding CO emissions, the simplified kinetic models are not capable to predict CO at stoichiometric conditions with errors below 30%. With the usage of a reduced kinetic mechanism, a better prediction capability of CO at stoichiometric air-to-fuel ratio could be achieved.

Variable intake manifold for the Audi V6 spark ignition engine

MTZ worldwide ◽  
2004 ◽  
Vol 65 (10) ◽  
pp. 12-13
Author(s):  
Dirk Anwender ◽  
Kay Brodesser ◽  
Ivano Morgillo
Keyword(s):  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Intake Manifold

Laminar flame speed correlations for methane, ethane, propane and their mixtures, and natural gas and gasoline for spark-ignition engine simulations

2017 ◽  
Vol 18 (9) ◽  
pp. 951-970 ◽  
Author(s):  
Riccardo Amirante ◽  
Elia Distaso ◽  
Paolo Tamburrano ◽  
Rolf D Reitz
Keyword(s):  
Natural Gas ◽  
Laminar Flame ◽  
Spark Ignition ◽  
Flame Speed ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Computational Time ◽  
Laminar Flame Speed ◽  
Spark Ignition Engines ◽  
Empirical Correlations

The laminar flame speed plays an important role in spark-ignition engines, as well as in many other combustion applications, such as in designing burners and predicting explosions. For this reason, it has been object of extensive research. Analytical correlations that allow it to be calculated have been developed and are used in engine simulations. They are usually preferred to detailed chemical kinetic models for saving computational time. Therefore, an accurate as possible formulation for such expressions is needed for successful simulations. However, many previous empirical correlations have been based on a limited set of experimental measurements, which have been often carried out over a limited range of operating conditions. Thus, it can result in low accuracy and usability. In this study, measurements of laminar flame speeds obtained by several workers are collected, compared and critically analyzed with the aim to develop more accurate empirical correlations for laminar flame speeds as a function of equivalence ratio and unburned mixture temperature and pressure over a wide range of operating conditions, namely [Formula: see text], [Formula: see text] and [Formula: see text]. The purpose is to provide simple and workable expressions for modeling the laminar flame speed of practical fuels used in spark-ignition engines. Pure compounds, such as methane and propane and binary mixtures of methane/ethane and methane/propane, as well as more complex fuels including natural gas and gasoline, are considered. A comparison with available empirical correlations in the literature is also provided.

Assessment of the reliability of ionization current measurement in estimating peak pressure angle in a spark ignition engine

2021 ◽  
pp. 146808742110399
Author(s):  
Veniero Giglio ◽  
Livia Della Ragione ◽  
Alessandro di Gaeta ◽  
Natale Rispoli
Keyword(s):  
Peak Pressure ◽  
Angular Position ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Mean Values ◽  
Pressure Angle ◽  
Ionization Current ◽  
Significant Difference ◽  
Second Peak

Ionization current measured at the spark plug during combustion in spark ignition engines has often been proposed to determine the crank-angle at combustion pressure peak, namely the peak pressure angle, for the purpose of regulating spark timing to attain maximum brake torque (MBT). The proposal is based on the assumption that agreement exists between peak pressure angle and the angular position of the ionization current second peak, although no one has ever proved it by an appropriate statistical analysis. The aim of this work, for the first time and by rigorous statistical methods, is to prove the agreement between Peak Pressure Angle and Ionization Current Second Peak Angle (ICSPA), without which a MBT control via ICSPA would be ineffective. Our experimental database consisted of about 9000 pairs of Peak Pressure Angle and Ionization Current Second Peak Angle values corresponding to 90 different operating conditions of a spark ignition engine. A two-sample comparison was first carried out between mean values of Peak Pressure Angle and Ionization Current Second Peak Angle, which showed a statistically significant difference between them. Then Bland-Altman analysis (Lancet, 1986), widely known and used for checking agreement between two different measurement methods, was conducted. It demonstrated that under almost all the experimental operating conditions, there was no agreement between the Ionization Current Second Peak Angle and the Peak Pressure Angle.

scholarly journals Operating parameters of a passenger vehicle turbocharged spark ignition engine in conditions of exhaust leakage simulation

2018 ◽  
Vol 19 (6) ◽  
pp. 463-467
Author(s):  
Krystian Hennek ◽  
Mariusz Graba
Keyword(s):  
Oxygen Sensor ◽  
Exhaust System ◽  
Combustion Products ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Oxidation Products ◽  
Operating Parameters ◽  
Passenger Vehicle ◽  
Chassis Dynamometer ◽  
Excess Air

Paper discussed the influence of exhaust system leakage on the utility parameters and toxic combustion products emission of a turbocharged passenger car spark ignition engine. A comparative analysis of the data gathered in the research carried out using the MAHA MSR 500 single roller chassis dynamometer was conducted, where the exhaust system was sealed and leaking in the area of the wideband oxygen sensor mounting bracket. The presented data refers to among others: the emissions of harmful gasoline oxidation products (HC, CO), the courses of power generated by the engine and the momentary values of excess air ratio. The EUDC driving cycle was used in the research.

Comparison Between Measured Radiance and a Radiation Model in a Spark-Ignition Engine

1990 ◽  
Vol 112 (3) ◽  
pp. 331-334 ◽  
Author(s):  
J. Yang ◽  
S. L. Plee ◽  
D. J. Remboski ◽  
J. K. Martin
Keyword(s):  
Heat Release ◽  
Release Rate ◽  
Maximum Rate ◽  
Spark Ignition ◽  
Rate Of Change ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Maximum Heat ◽  
Radiant Intensity ◽  
Maximum Heat Release

Measurements of the radiant emission in the near infrared have been obtained in a spark-ignition engine over a wide range of operating conditions. The system includes an in-cylinder optical sensor and associated detector. Prior work has shown correlations between the measured radiance and pressure quantities such as maximum cylinder pressure, crank angle of maximum pressure, and Indicated Mean Effective Pressure. Here are presented comparisons between the radiant intensity and a simplified model of the radiation emission, which demonstrate that the measured intensity is a function of the mass-burn fraction, mean burned-gas temperature, and the exposed combustion-chamber surface area. Further simplification leads to the conclusion that the time of the maximum rate of change of radiant intensity is the same as for the maximum heat-release rate, leading to the possibility of feedback control of spark timing. In addition, the magnitudes of the maximum rate of change of radiant emission and maximum heat-release rate have a linear relationship over a range of different operating conditions.

Model-Based Combustion Duration and Ignition Timing Prediction for Combustion Phasing Control of a Spark-Ignition Engine Using In-Cylinder Pressure Sensors

2019 ◽  
Author(s):  
Xin Wang ◽  
Amir Khameneian ◽  
Paul Dice ◽  
Bo Chen ◽  
Mahdi Shahbakhti ◽  
...  
Keyword(s):  
Pressure Sensors ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Ignition Timing ◽  
Model Based ◽  
Crank Angle ◽  
Si Engines ◽  
Phasing Control

Abstract Combustion phasing, which can be defined as the crank angle of fifty percent mass fraction burned (CA50), is one of the most important parameters affecting engine efficiency, torque output, and emissions. In homogeneous spark-ignition (SI) engines, ignition timing control algorithms are typically map-based with several multipliers, which requires significant calibration efforts. This work presents a framework of model-based ignition timing prediction using a computationally efficient control-oriented combustion model for the purpose of real-time combustion phasing control. Burn duration from ignition timing to CA50 (ΔθIGN-CA50) on an individual cylinder cycle-by-cycle basis is predicted by the combustion model developed in this work. The model is based on the physics of turbulent flame propagation in SI engines and contains the most important control parameters, including ignition timing, variable valve timing, air-fuel ratio, and engine load mostly affected by combination of the throttle opening position and the previous three parameters. With 64 test points used for model calibration, the developed combustion model is shown to cover wide engine operating conditions, thereby significantly reducing the calibration effort. A Root Mean Square Error (RMSE) of 1.7 Crank Angle Degrees (CAD) and correlation coefficient (R2) of 0.95 illustrates the accuracy of the calibrated model. On-road vehicle testing data is used to evaluate the performance of the developed model-based burn duration and ignition timing algorithm. When comparing the model predicted burn duration and ignition timing with experimental data, 83% of the prediction error falls within ±3 CAD.

Sign in / Sign up

Export Citation Format

Share Document