scholarly journals Microstructure and Photothermal Conversion Performance of Ti/(Mo-TiAlN)/(Mo-TiAlON)/Al2O3 Selective Absorbing Film for Non-Vacuum High-Temperature Applications

2020 ◽  
Vol 11 (1) ◽  
pp. 124
Author(s):  
Haibin Geng ◽  
Hanzhe Ye ◽  
Xingliang Chen ◽  
Sibin Du
Keyword(s):  
Visible Light ◽  
Near Infrared ◽  
Substitutional Solid Solution ◽  
Experimental Conditions ◽  
Al Content ◽  
Spectrum Range ◽  
Light Interference ◽  
Transmission Electron ◽  
Conversion Performance ◽  
Columnar Grain

This paper aims to clarify the phase composition in each sub-layer of tandem absorber TiMoAlON film and verify its thermal stability. The deposited multilayer Ti/(Mo-TiAlN)/(Mo-TiAlON)/Al2O3 films include an infrared reflectance layer, light interference absorptive layers with different metal doping amounts, and an anti-reflectance layer. The layer thicknesses of Ti, Mo-TiAlN, Mo-TiAlON, and Al2O3 are 100, 300, 200, and 80 nm, respectively. Al content increases to 12 at.% and the ratio of N/O is nearly 0.1, which means nitride continuously changes to oxide. According to X-ray Diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) results, the diffraction peak that appears at 2θ = 40° demonstrates that Mo element aggregates in the substitutional solid solution (Ti,Al)(O,N) columnar grain. TiMoAlON films have low reflectivity in the spectrum range of 300–900 nm. When Al content is more than 10 at.%, absorptivity is almost in the spectrum range from visible to infrared, but absorptivity decreases in the ultraviolet spectrum range. When Al content is increased to 12 at.%, absorptivity α decreases by 0.05 in the experimental conditions. After baking in atmosphere at 500 °C for 8 h, the film has the highest absorptivity when doped with 2 at.% Mo. In the visible-light range, α = 0.97, and in the whole ultraviolet-visible-light near-infrared spectrum range, α = 0.94, and emissivity ε = 0.02 at room temperature and ε = 0.10 at 500 °C.

Photocatalytic H2 production on trititanate nanotubes coupled with CdS and platinum nanoparticles under visible light: revisiting H2 production and material durability

2017 ◽  
Vol 198 ◽  
pp. 419-431 ◽  
Author(s):  
Hyunwoong Park ◽  
Hsin-Hung Ou ◽  
Minju Kim ◽  
Unseock Kang ◽  
Dong Suk Han ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
H2 Production ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
Thermal Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Detailed Surface ◽  
Efficient Charge

The photocatalytic production of molecular hydrogen (H2) on ternary composites of Pt, CdS, and sodium trititanate nanotubes (NaxH2−xTi3O7, TNTs) is examined in an aqueous 2-propanol (IPA) solution (typically 5 vol%) at a circum-neutral pH under visible light (λ > 420 nm). The H2 production rates are dependent on the Pt-loading level, and the optimum production rate in the Pt/CdS/TNTs is approximately six times higher than that in Pt/CdS/TiO2. A D2O solution containing 5 vol% IPA leads only to the production of D2 molecules, whereas increasing the IPA amount to 30 vol% leads to the production of DH molecules. This indicates that the Pt/CdS/TNTs composites enable H2 production via true water splitting under our typical experimental conditions. X-ray photoelectron spectroscopy (XPS) analyses of the as-synthesized Pt/CdS/TNTs and those used for 6 and 12 h show that metallic Pt on the CdS/TNTs is less susceptible to oxidation than Pt on CdS/TiO2. In addition, photocorrosion of CdS (i.e., sulfate formation) is significantly inhibited during the photocatalytic H2 production reactions in the Pt/CdS/TNTs because of the efficient charge transfer via the TNTs framework. The Pt/CdS/TNTs samples are thermally more stable than Pt/CdS/TiO2 and CdS/TNTs, effectively inhibiting the formation of CdO during the thermal synthesis. Detailed surface characterizations of the as-synthesized ternary composites are performed using X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy, and XPS.

scholarly journals Facile synthesis of Rh/Ti3+-TiO2 nanocomposites and its photodisinfection properties on Staphylococcus aureus under visible-NIR excitation

2020 ◽  
Author(s):  
Jingtao Zhang ◽  
Shurui Liu ◽  
Qinwen Wang ◽  
Jing Yao ◽  
Yin Liu ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Near Infrared ◽  
One Pot ◽  
X Ray ◽  
Nir Light ◽  
Transmission Electron ◽  
Response Range ◽  
The One

Abstract In this study, we synthesized a series of rhodium-modified and Ti3+ self-doped TiO2 (Rh/Ti3+-TiO2) nanocomposites via the one-pot method. We prepared samples of Rh/Ti3+-TiO2, which were analyzed using X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Electron Spin Resonance (ESR), and Uv-vis-NIR analysis. We found that the ability of TiO2 to absorb near-infrared and visible light was significantly improved by the Rh/Ti3+-TiO2 nanocomposites, due to Ti3+ doping as well as modification of Rh. The disinfection properties of these materials were tested using Staphylococcus aureus under visible light and NIR light excitations. The synthesized photocatalyst was found to exhibit significantly enhanced photocatalytic inactivation of S. aureus under both visible and NIR light irradiation, as compared to pure TiO2. This was particularly true with respect to the 5% Rh/Ti3+-TiO2 sample. Our results suggest that the Rh/Ti3+-TiO2 composites could extend the range of optical response range of pure nano TiO2 materials to the Vis -NIR region.

scholarly journals Improved ciprofloxacin removal by a Fe(VI)-Fe3O4/graphene system under visible light irradiation

2018 ◽  
Vol 2017 (2) ◽  
pp. 527-533 ◽  
Author(s):  
Shunping Fang ◽  
Zhengwei Zhou ◽  
Jinjuan Xue ◽  
Guangyu He ◽  
Haiqun Chen
Keyword(s):  
Visible Light ◽  
Visible Light Irradiation ◽  
High Performance ◽  
Light Irradiation ◽  
Precipitation Method ◽  
Solution Ph ◽  
Experimental Conditions ◽  
Transmission Electron ◽  
Determining Factors ◽  
Co Precipitation

Abstract In this paper, Fe3O4/graphene (Fe3O4/GE) nanocomposites were prepared by a co-precipitation method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-vis diffuse reflectance spectra (UV-vis DRS). The composites were used in combination with Fe(VI) to construct a Fe(VI)-Fe3O4/GE system in order to degrade ciprofloxacin (CIP) in simulated water samples. The photocatalytic properties of Fe(VI)-Fe3O4/GE were evaluated under visible light irradiation. The concentration of CIP in solution was detected by high performance liquid chromatography (HPLC). A series of results showed that Fe(VI), as a good electron capture agent, could significantly improve the treatment performance. Major determining factors during CIP degradation were also investigated, in which solution pH of 9, Fe(VI) to Fe3O4/GE dosage ratio of 1:25 and GE content in the Fe3O4/GE nanocomposites of 10 wt% were found to be the best experimental conditions. The results demonstrated that the Fe(VI)-Fe3O4/GE system could offer an alternative process in water treatment in addition to the current Fe(VI)-UV/TiO2 process.

A comparative study on the cold type and thermal type field emission guns used in the same electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 58-59
Author(s):  
M. Iwatsuki ◽  
Y. Kokubo ◽  
Y. Harada
Keyword(s):  
Electron Microscope ◽  
Field Emission ◽  
Signal To Noise Ratio ◽  
Electron Source ◽  
Resolving Power ◽  
Optical Source ◽  
Experimental Conditions ◽  
High Brightness ◽  
Illumination System ◽  
Transmission Electron

On accout of its high brightness, small optical source size, and minimal energy spread, the field emission gun (FEG) has the advantage that it provides the conventional transmission electron microscope (TEM) with a highly coherent illumination system and directly improves the resolving power and signal-to-noise ratio of the scanning electron microscope (SEM). The FEG is generally classified into two types; the cold field emission (C-FEG) and thermal field emission gun (T-FEG). The former, in which a field emitter is used at the room temperature, was successfully developed as an electron source for the SEM. The latter, in which the emitter is heated to the temperature range of 1000-1800°K, was also proved to be very suited as an electron source for the TEM, as well as for the SEM. Some characteristics of the two types of the FEG have been studied and reported by many authors. However, the results of the respective types have been obtained separately under different experimental conditions.

scholarly journals Comprehensive modeling of bloodstain aging by multivariate Raman spectral resolution with kinetics

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Ayari Takamura ◽  
Daisuke Watanabe ◽  
Rintaro Shimada ◽  
Takeaki Ozawa
Keyword(s):  
Spectral Resolution ◽  
Aging Process ◽  
Near Infrared ◽  
Biochemical Characterization ◽  
Forensic Analysis ◽  
Chemical Mechanism ◽  
Experimental Conditions ◽  
Spectral Components ◽  
Different Temperatures ◽  
Analytical Approaches

Abstract Blood, as a cardinal biological system, is a challenging target for biochemical characterization because of sample complexity and a lack of analytical approaches. To reveal and evaluate aging process of blood compositions is an unexplored issue in forensic analysis, which is useful to elucidate the details of a crime. Here we demonstrate a spectral deconvolution model of near-infrared Raman spectra of bloodstain to comprehensively describe the aging process based on the chemical mechanism, particularly the kinetics. The bloodstain spectra monitored over several months at different temperatures are decomposed into significant spectral components by multivariate calculation. The kinetic schemes of the spectral components are explored and subsequently incorporated into the developed algorithm for the optimal spectral resolution. Consequently, the index of bloodstain aging is proposed, which can be used under different experimental conditions. This work provides a novel perspective on the chemical mechanisms in bloodstain aging and facilitates forensic applications.

scholarly journals Controlled Synthesis of CuS and Cu9S5 and Their Application in the Photocatalytic Mineralization of Tetracycline

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 899
Author(s):  
Murendeni P. Ravele ◽  
Opeyemi A. Oyewo ◽  
Damian C. Onwudiwe
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Blue Shift ◽  
X Ray Diffraction ◽  
X Ray ◽  
Copper Sulfides ◽  
Transmission Electron ◽  
Single Source Precursor ◽  
Pure Phase ◽  
Pure Phases

Pure-phase Cu2−xS (x = 1, 0.2) nanoparticles have been synthesized by the thermal decomposition of copper(II) dithiocarbamate as a single-source precursor in oleylamine as a capping agent. The compositions of the Cu2−xS nanocrystals varied from CuS (covellite) through the mixture of phases (CuS and Cu7.2S4) to Cu9S5 (digenite) by simply varying the temperature of synthesis. The crystallinity and morphology of the copper sulfides were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which showed pure phases at low (120 °C) and high (220 °C) temperatures and a mixture of phases at intermediate temperatures (150 and 180 °C). Covellite was of a spherical morphology, while digenite was rod shaped. The optical properties of these nanocrystals were characterized by UV−vis–NIR and photoluminescence spectroscopies. Both samples had very similar absorption spectra but distinguishable fluorescence properties and exhibited a blue shift in their band gap energies compared to bulk Cu2−xS. The pure phases were used as catalysts for the photocatalytic degradation of tetracycline (TC) under visible-light irradiation. The results demonstrated that the photocatalytic activity of the digenite phase exhibited higher catalytic degradation of 98.5% compared to the covellite phase, which showed 88% degradation within the 120 min reaction time using 80 mg of the catalysts. The higher degradation efficiency achieved with the digenite phase was attributed to its higher absorption of the visible light compared to covellite.

scholarly journals Selective growth of Ti3+/TiO2/CNT and Ti3+/TiO2/C nanocomposite for enhanced visible-light utilization to degrade organic pollutants by lowering TiO2-bandgap

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jeasmin Akter ◽  
Md. Abu Hanif ◽  
Md. Akherul Islam ◽  
Kamal Prasad Sapkota ◽  
Jae Ryang Hahn
Keyword(s):  
Visible Light ◽  
Structural Integrity ◽  
Carbon Layer ◽  
Wide Bandgap ◽  
Blue Dye ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
Excellent Photocatalytic Activity ◽  
Convenient Route ◽  
Walled Carbon Nanotubes

AbstractA convenient route was developed for the selective preparation of two stable nanocomposites, Ti3+/TiO2/CNT (labeled as TTOC-1 and TTOC-3) and Ti3+/TiO2/carbon layer (labeled as TTOC-2), from the same precursor by varying the amount of single-walled carbon nanotubes used in the synthesis. TiO2 is an effective photocatalyst; however, its wide bandgap limits its usefulness to the UV region. As a solution to this problem, our prepared nanocomposites exhibit a small bandgap and wide visible-light (VL) absorption because of the introduction of carbonaceous species and Ti3+ vacancies. The photocatalytic efficiency of the nanocomposites was examined via the degradation of methylene blue dye under VL. Excellent photocatalytic activity of 83%, 98%, and 93% was observed for TTOC-1, TTOC-2, and TTOC-3 nanocomposites within 25 min. In addition, the photocatalytic degradation efficiency of TTOC-2 toward methyl orange, phenol, rhodamine B, and congo red was 28%, 69%, 71%, and 91%, respectively, under similar experimental conditions after 25 min. Higher reusability and structural integrity of the as-synthesized photocatalyst were confirmed within five consecutive runs by photocatalytic test and X-ray diffraction analysis, respectively. The resulting nanocomposites provide new insights into the development of VL-active and stable photocatalysts with high efficiencies.

A Critical Review of Morphologic Findings and Data From 14 Toxicological Studies Involving Fish Exposures to Diclofenac

2021 ◽  
pp. 019262332198965
Author(s):  
Jeffrey C. Wolf
Keyword(s):  
Diagnostic Errors ◽  
Data Interpretation ◽  
Included Study ◽  
Experimental Conditions ◽  
Regulatory Decision ◽  
Transmission Electron ◽  
Toxicological Studies ◽  
Morphologic Data ◽  
Ambiguous Data

A number of studies have investigated the potential toxicity of the analgesic agent diclofenac (DCF) in various fish species under a diverse array of experimental conditions. Reported evidence of toxicity in these investigations is often strongly reliant on morphologic end points such as histopathology, immunohistochemistry, and transmission electron microscopy. However, it may be challenging for scientists who perform environmental hazard or risk determination to fully appreciate the intricacies of these specialized endpoints. Therefore, the purpose of the current review was to critically assess the quality of morphologic data in 14 papers that described the experimental exposure of fish to DCF. Areas of focus during this review included study design, diagnostic accuracy, magnitude of reported changes, data interpretation and presentation, and the credibility of individual reported findings. Positive attributes of some studies included robust experimental designs, accurate diagnoses, and straightforward and transparent data reporting. Issues identified in certain articles included diagnostic errors, failure to account for sampling and/or observer bias, failure to evaluate findings according to sex, exaggeration of lesion severity, interstudy inconsistencies, unexplained phenomena, and incomplete or ambiguous data presentation. It is hoped that the outcome of this review will be of value for personnel involved in regulatory decision-making.

An approach to ensure joint illumination & communication performance of a forward error corrected indoor visible light communication (VLC) system in presence of ambient light interference

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sourish Chatterjee ◽  
Biswanath Roy
Keyword(s):  
Visible Light ◽  
Bit Error Rate ◽  
Error Rate ◽  
Light Emitting Diode ◽  
Visible Light Communication ◽  
Ambient Light ◽  
Ambient Illumination ◽  
Communication Performance ◽  
Light Interference ◽  
Forward Error

AbstractIn recent time of looming radio frequency (RF) spectrum crisis, visible light communication using lighting infrastructure emerged as a potential alternative at an indoor environment. This paper addresses the setback associated with ambient light interference in an indoor Visible Light Communication (VLC) system to ensure joint communication and illumination performance inside an office room. A novel VLC architecture with suitable white light emitting diode (WLED) luminaire arrangement is presented to minimize the dispersion of signal to interference plus noise ratio (SINR) across the room. Luminaires are categorized in two groups viz. data transmitting illuminants and illuminants for lighting purpose. The first group is dedicated to transmit data as well as serves the purpose of illumination. The other set creates only ambient illumination to achieve quality lighting attributes. The proposed forward error corrected receiver configuration discards the ambient light noise originated by the illuminants that serve the ambient illumination. Tail biting convolutional encoder and viterbi decoder are used at the encoding section of the transmitter and decoding section of the receiver respectively to improve bit error rate. Results obtained through MATLAB simulation shows better average bit error rate (BER) in the order of 10−8 measured at uniformly distributed 25 grid points over the working plane. At the same time achieved average horizontal illuminance with good uniformity comply with ISO recommendation.

Sign in / Sign up

Export Citation Format

Share Document