scholarly journals Application of Non-Destructive Techniques on a Varve Sediment Record from Vouliagmeni Coastal Lake, Eastern Gulf of Corinth, Greece

2020 ◽  
Vol 10 (22) ◽  
pp. 8273
Author(s):  
Alexandros Emmanouilidis ◽  
Ingmar Unkel ◽  
Joana Seguin ◽  
Kleoniki Keklikoglou ◽  
Eleni Gianni ◽  
...  

During the last few decades, X-ray attenuation systems have been established as standard techniques in geosciences and as excellent scientific tools for the analysis of sedimentary facies and structures. In the present study, we use two non-destructive and high-resolution systems (computed tomography, X-ray fluorescence) to address all sedimentological facies and structural characteristics on a 6 m long, partly laminated sediment record, from Vouliagmeni lake, located at the eastern part of the Corinth Gulf, Greece. Vouliagmeni lake is the deepest coastal lake in Greece, and its location is of great importance since it is located in one of the most tectonically active regions in the world. The chronological framework of the retrieved sediment sequence spans the last 12,000 years, with alternations of laminated and non-laminated sections. The annual accumulation of the laminated sequences was determined through the radionuclide concentration of 14 samples. Scanning tomography was performed with a medical CT scanner and a μCT scanner, aiming to compare the potentials and variations of both methods. Lamination boundaries, event layers (turbidites) and sediment deformations were distinguished through processing the extracted 3D rendered volumes, after applying ranges depending on Hounsfield (HU) values. Microscopic analysis revealed three main layer types in the varve sequences that were examined, attributing to summer/spring, autumn and winter deposits. Statistical analysis of the elemental composition, magnetic susceptibility (MS) measurements and HU values revealed three clusters/facies, reflecting climatic and in-lake hydrological changes. Cluster A emulates sedimentation during arid conditions, while Cluster B reflects humid conditions with increased precipitation and erosion. Cluster C represents sequences with homogenous Ca-rich sediment. Our proposed workflow highlights the possible correlation between the non-destructive variables that were measured, but also the variations and applications of each method and software used during this study.

2021 ◽  
Author(s):  
Αλέξανδρος Εμμανουηλίδης

This thesis presents a multi-proxy reconstruction from 5 different coastal wetlands of southern Greece spanning in the Holocene period and an in-depth review and application of non-destructive systems (CT scanning, X-ray Fluorescence) in paleoenvironmental research. During this thesis, the acquired dataset used consisted of a) X-ray Fluorescence scanning (XRF), b) Computed Tomography (CT) scanning, c) Stable isotopes δ18O and δ13C, d) micropaleontology (foraminifera, ostracods, diatoms, pollen), e) mineralogical analysis, and f) standard sedimentological techniques (grain size, magnetic susceptibility (MS), Total Organic Carbon (TOC), carbonates content). The chronological framework for the sediment cores was established through 14C radiocarbon dating. The wetlands studied are Aliki salt pond (NE Gulf of Corinth), Klisova lagoon (SW Greece), lake Vouliagmeni (E Gulf of Corinth), Agoulinitsa marsh field (W Peloponnese) and Pappas lagoon (NW Peloponnese). The sites form an E-W transect of southern Greece, an area with high climatic and environmental spatial variability, whereas human occupancy on all areas is recorded from antiquity. Non-destructive, high-resolution techniques used in this thesis have been established as standard in the last decades and have been a great asset in geosciences. Computed Tomography (CT) was conducted in lake Vouliagmeni, Agoulinitsa marsh and Pappas lagoon cores. In contrast, XRF was performed on all core sections except for Pappas lagoon core, where the high assemblage of bivalve shells could lead to bias of Ca. The fundamental parameter behind CT analysis is the Hounsfield units that reflect relative density variations in the sediment. Correlation between HU values and heavy elements like Zr has been detected in all cores, whereas distinct sedimentological facies were recorded according to HU variations. In Agoulinitsa and Pappas lagoon, microstructural characteristics like shells/sediment ratio and root remnants were examined through 3D sections, in which HU boundaries were set accordingly. Lake Vouliagmeni sediment core was characterized by extreme stratigraphic variations with lamination structures alternating with homogenous deposits and event layers. Laminae thickness and boundaries were recorded through 3D rendered volumes with HU boundaries. Micro CT scanning and thin section analysis was also performed to cross-check possible variations. Event sedimentation layers were distinguished through the combined use of CT scanning, XRF and MS, with layers responding to increased HU, MS and Mn values. Statistical assessment of elemental distribution and HU revealed 3 different clusters. Cluster A responded to sedimentation during enhanced evaporation in the area, Cluster B emulated sedimentation during increased chemical weathering in the catchment, and Cluster C reflected the homogenous deposits. Aliki salt pond is located in a highly tectonic region, at the northeast part of the Gulf of Corinth in Greece. Beachrock deposits that form a barrier between the salt pond and the marine environment play an essential role in the evolution of the area. The chronological framework was set at ca. 3100 cal BP by four 14C radiocarbon dates and the established evolutionary model indicate four different changes taking place during this period in the study area. From around 3100 to 1600 cal BP, a transition from a closed to an open lagoonal environment, was identified, interrupted by a terrestrial fluvial deposit at ca. 2500 cal BP. A shift toward a closed lagoonal system at around 1600 cal BP and the establishment of a salt pond environment seem to correlate with tectonic activity. The study provides important information about the evolution of the coastal landscape in such an active tectonic region and points the interaction between regional human activity and climatic changes during the late-Holocene period.Klisova lagoon is located in the eastern part of Messolonghi-Etoliko wetland, the biggest lagoonal complex of Greece and an area of great environmental interest. For the last 4700 cal BP, the freshwater influx, the progradation of the Evinos river delta and related geomorphological changes control the environmental conditions (e.g. depth and salinity) in the lagoon system. Considering the centennial temporal resolution of our analyses, small offsets of c.a. 50 years due to the lack of regional reservoir correction do not impact the reported radiocarbon ages considerably. Prior to 4000 cal BP, a relatively shallow water depth, significant terrestrial/freshwater input and increased weathering in the lagoon area are inferred. Elemental proxies and increased dinoflagellate and foraminifera abundances, which indicate marine conditions with prominent freshwater influxes, point to the gradual deepening of the lagoon recorded at the drilling site up to 2000 cal BP. The marine and freshwater conditions equilibrium sets at 1300 cal BP, and the lagoonal system seems to reach its present state. Maxima of anthropogenic pollen indicators during the Mycenaean (3200 cal BP), Hellenistic (2200 cal BP) and Late Byzantine (800 cal BP) periods suggest intervals of increased anthropogenic activities in the study area. Lake Vouliagmeni is subjected to intense climatically and tectonic forces, causing stratigraphic variations, with laminated sediments frequently interrupted by homogenous and event sedimentation deposits. Lamination couplets consist of aragonite layers alternating with detrital and organic residues and form during periods of seawater intrusion and stratification of the lake water. The discontinuous occurrence of laminated deposits excludes a varve based chronology from being established but still highlights the susceptibility of the lake to record environmental and climatically driven changes. Our synthesis model for regional climatic reconstruction and local environmental changes derives from δ18O and δ13C data from the laminated and homogenous sediments studied separately depending on the dominant carbonate mineral. This is further strengthened by high-resolution geochemical proxies, diatom and sedimentological data. Regional climatic trajectories from key sites and possible links to the lake Vouliagmeni record are explored in response to atmospheric circulation patterns variations. Phases of overall humid conditions are recorded by the increased inflow of siliciclastic material in the lake and negative δ18Obulk values. In contrast, periods of marine intrusion and enhanced evaporation are recorded by aragonite precipitation, increased δ18OAr values and laminations. The driving mechanism behind laminae formation seems to be marine intrusions, leading to pycnocline stabilization and increased evaporation of lake surface waters during summer months. Climatic oscillations recorded during the Holocene, apart from their duration, do not exceed events of the last millennia.


Heritage ◽  
2019 ◽  
Vol 2 (4) ◽  
pp. 2691-2703 ◽  
Author(s):  
Victoria Corregidor ◽  
Rita Viegas ◽  
Luís M. Ferreira ◽  
Luís C. Alves

Old manuscripts are among the most important elements of the cultural and historical heritage of ancient knowledge. Unfortunately, many of them suffer from degradation, mostly those written with iron gall inks. In the present work, a study using non-destructive techniques was designed with the aim of analyzing the elemental composition and structural characteristics of iron gall inks, reproduced in laboratory, paper and their interaction when the ink is deposited on paper, inducing the paper degradation. Proton induced X-ray emission, X-ray diffraction and Fourier-transform infrared spectroscopy provided the elemental and structural information, and photography under infrared (IR) and ultraviolet (UV) light allowed the differentiation between manufactured inks. Results show that the first step of inked paper deterioration is due to acid-hydrolysis of the cellulose and the presence of reactive Fe(II) species by reducing the crystallinity index of the paper, which is affected depending on the ink recipe and the starting raw materials. These results will be useful to future studies on ancient documents written with iron gall inks, which suffer deterioration due to ink corrosion, and to differentiate between the different paper degradation mechanisms.


2010 ◽  
Vol 43 (6) ◽  
pp. 1300-1304 ◽  
Author(s):  
Sanghwa Lee ◽  
Yuri Sohn ◽  
Chinkyo Kim ◽  
Dong Ryeol Lee ◽  
Hyun-Hwi Lee

The crystallographic and structural characteristics of GaN tripods and hexapods grown onc-plane sapphire substrates were investigated using synchrotron X-ray scattering and microscopic analysis. The core structure of a GaN hexapod is revealed to be in the zincblende phase with an inversion domain, and a refined crystallographic analysis of tripods and hexapods with synchrotron X-ray scattering shows the existence of the zincblende phase in wurtzite-based protruding nanorods. The atomistic model combined with this crystallographic analysis reveals that the core size of a hexapod is much smaller than the diameters of the protruding nanorods. This refined structural analysis can be utilized in tailoring the opto-electronic characteristics of GaN multipods.


2013 ◽  
Vol 379 ◽  
pp. 3-10 ◽  
Author(s):  
Andrey V. Batranin ◽  
Sergey V. Chakhlov ◽  
Dmitry V. Grinev ◽  
Boris I. Kapranov ◽  
Vasily A. Klimenov

2021 ◽  
Vol 1 (2) ◽  
pp. 189-200
Author(s):  
Julia Gerasimova ◽  
Bernhard Ruthensteiner ◽  
Andreas Beck

High-resolution X-ray computer tomography (microCT) is a well-established technique to analyse three-dimensional microstructures in 3D non-destructive imaging. The non-destructive three-dimensional analysis of lichens is interesting for many reasons. The examination of hidden structural characteristics can, e.g., provide information on internal structural features (form and distribution of fungal-supporting tissue/hypha), gas-filled spaces within the thallus (important for gas exchange and, thus, physiological processes), or yield information on the symbiont composition within the lichen, e.g., the localisation and amount of additional cyanobacteria in cephalodia. Here, we present the possibilities and current limitations for applying conventional laboratory-based high-resolution X-ray computer tomography to analyse lichens. MicroCT allows the virtual 3D reconstruction of a sample from 2D X-ray projections and is helpful for the non-destructive analysis of structural characters or the symbiont composition of lichens. By means of a quantitative 3D image analysis, the volume of internal cephalodia is determined for Lobaria pulmonaria and the external cephalodia of Peltigera leucophlebia. Nevertheless, the need for higher-resolution tomography for more detailed studies is emphasised. Particular challenges are the large sizes of datasets to be analysed and the high variability of the lichen microstructures.


2002 ◽  
Vol 16 (06n07) ◽  
pp. 1072-1079 ◽  
Author(s):  
K. CHEW ◽  
S. F. YOON ◽  
H. K. CHAN ◽  
C. F. NG ◽  
Q. ZHANG ◽  
...  

X-ray reflectivity (XRR) is a sensitive and non-destructive technique for the characterization of surfaces and thin film properties. Due to the spectroscopic nature of the problem, the unknown parameters are solved indirectly by fitting the theoretical reflectivity spectra to the experimental spectra. In this work, we propose three algorithms that allow the direct determination of the properties, which are more efficient compared to the fitting process that requires initial guesses, and whose convergence depends critically on the goodness of the guesses. The algorithms are developed for a structure with a one-layer film on a substrate. However, for films having an additional top surface layer, or an interface layer next to the substrate, the algorithms can also be applied to approximately deduce the parameters of the main layer of film.


2001 ◽  
Vol 678 ◽  
Author(s):  
Emil Zolotoyabko ◽  
John P. Quintana

AbstractWe developed a depth-sensitive x-ray diffraction technique in which diffraction profiles are measured at x-ray energies that are varied by small steps. The method is intended for synchrotron beam lines and provides non-destructive mapping of structural characteristics in inhomogeneous polycrystalline materials. Depth resolution is achieved due to an energy dependence of the x-ray penetration length. Application of this technique to seashells allowed us to extract spatial distributions of preferred orientation and strain components, which revealed pronounced variations of the shell microstructure in three dimensions. The results shed light on “engineering solutions” by mollusk. The developed technique can be used to characterize various laminated structures and composite materials.


Author(s):  
R. Gronsky

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.


Author(s):  
A. R. Lang

AbstractX-ray topography provides a non-destructive method of mapping point-by-point variations in orientation and reflecting power within crystals. The discovery, made by several workers independently, that in nearly perfect crystals it was possible to detect individual dislocations by X-ray diffraction contrast started an epoch of rapid exploitation of X-ray topography as a new, general method for assessing crystal perfection. Another discovery, that of X-ray Pendellösung, led to important theoretical developments in X-ray diffraction theory and to a new and precise method for measuring structure factors on an absolute scale. Other highlights picked out for mention are studies of Frank-Read dislocation sources, the discovery of long dislocation helices and lines of coaxial dislocation loops in aluminium, of internal magnetic domain structures in Fe-3 wt.% Si, and of stacking faults in silicon and natural diamonds.


Sign in / Sign up

Export Citation Format

Share Document