scholarly journals The Effect of a Composite Nanostructure on the Mechanical Properties of a Novel Al-Cu-Mn Alloy through Multipass Cold Rolling and Aging

2020 ◽  
Vol 10 (22) ◽  
pp. 8109
Author(s):  
Ke Feng ◽  
Ming Yang ◽  
Shao-lei Long ◽  
Bo Li
Keyword(s):  
Cold Rolling ◽  
Laser Scanning ◽  
Solution Treatment ◽  
High Strength ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dislocation Network ◽  
Network Structures ◽  
Ultrafine Grains ◽  
Strength And Ductility

An effective approach composed of solution treatment, multipass cold rolling and aging was developed to improve the strength and ductility of novel Al-Cu-Mn alloys. This approach increased the yield strength by 214 MPa over that of the conventional peak-aged samples while maintaining a good elongation of 8.7%. The microstructure evolution was examined by confocal laser scanning microscopy (CLSM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). During postaging, deformed structures underwent a considerable decrease in dislocation density and typical dislocation network structures were formed. At the same time, highly dispersed nanoprecipitates and extensive ultrafine grains and nanograins were generated. These nanoprecipitations enabled effective dislocation pinning and accumulation during tension deformation. Therefore, composite nanostructures containing ultrafine grains, nanograins, dislocation network structures and nanoprecipitates were responsible for the simultaneous increases in strength and ductility. This paper provides a new understanding of designing composite nanostructure materials for achieving high strength and good ductility that is expected to be used for other age-hardenable alloys and steels.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

A TEM microscopical investigation of the magnetic domain structure of a metastable austenitic stainless steel

1994 ◽  
Vol 52 ◽  
pp. 696-697
Author(s):  
G. Fourlaris ◽  
T. Gladman
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Cold Rolling ◽  
Solution Treatment ◽  
Magnetic Domain ◽  
High Strength ◽  
Medium Carbon Steel ◽  
Magnetic Characteristics ◽  
Metastable Austenitic Stainless Steel

Stainless steels have widespread applications due to their good corrosion resistance, but for certain types of large naval constructions, other requirements are imposed such as high strength and toughness , and modified magnetic characteristics.The magnetic characteristics of a 302 type metastable austenitic stainless steel has been assessed after various cold rolling treatments designed to increase strength by strain inducement of martensite. A grade 817M40 low alloy medium carbon steel was used as a reference material.The metastable austenitic stainless steel after solution treatment possesses a fully austenitic microstructure. However its tensile strength , in the solution treated condition , is low.Cold rolling results in the strain induced transformation to α’- martensite in austenitic matrix and enhances the tensile strength. However , α’-martensite is ferromagnetic , and its introduction to an otherwise fully paramagnetic matrix alters the magnetic response of the material. An example of the mixed martensitic-retained austenitic microstructure obtained after the cold rolling experiment is provided in the SEM micrograph of Figure 1.

Vacuoles Induced in Mammalian Cells by Helicobacter Cytotoxin are Acidic Organelles

1990 ◽  
Vol 48 (3) ◽  
pp. 168-169
Author(s):  
M. H. Chestnut ◽  
C. E. Catrenich
Keyword(s):  
Acridine Orange ◽  
Mammalian Cells ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Ulcer Disease ◽  
Gastroduodenal Disease ◽  
H Pylori

Helicobacter pylori is a non-invasive, Gram-negative spiral bacterium first identified in 1983, and subsequently implicated in the pathogenesis of gastroduodenal disease including gastritis and peptic ulcer disease. Cytotoxic activity, manifested by intracytoplasmic vacuolation of mammalian cells in vitro, was identified in 55% of H. pylori strains examined. The vacuoles increase in number and size during extended incubation, resulting in vacuolar and cellular degeneration after 24 h to 48 h. Vacuolation of gastric epithelial cells is also observed in vivo during infection by H. pylori. A high molecular weight, heat labile protein is believed to be responsible for vacuolation and to significantly contribute to the development of gastroduodenal disease in humans. The mechanism by which the cytotoxin exerts its effect is unknown, as is the intracellular origin of the vacuolar membrane and contents. Acridine orange is a membrane-permeant weak base that initially accumulates in low-pH compartments. We have used acridine orange accumulation in conjunction with confocal laser scanning microscopy of toxin-treated cells to begin probing the nature and origin of these vacuoles.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

ACTIVATED SLUDGE FLOC CHARACTERIZATION BY CONFOCAL LASER SCANNING MICROSCOPY

2012 ◽  
Vol 11 (3) ◽  
pp. 669-674 ◽  
Author(s):  
Szabolcs Szilveszter ◽  
Botond Raduly ◽  
Szilard Bucs ◽  
Beata Abraham ◽  
Szabolcs Lanyi ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser

Cuticular structures in the copulatory apparatus of Planorbis planorbis (Linnaeus, 1758) (Gastropoda: Pulmonata: Planorbidae)

2009 ◽  
Vol 18 (1) ◽  
pp. 11-16
Author(s):  
E.V. Soldatenko ◽  
A.A. Petrov
Keyword(s):  
Light Microscopy ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Taxonomic Status ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Copulatory Apparatus ◽  
The Family ◽  
Cuticular Structures

The morphology of the copulatory apparatus and associated cuticular structures in Planorbis planorbis was studied by light microscopy, SEM, TEM and confocal laser scanning microscopy. The significance of these cuticular structures for the taxonomic status of the species and for the systematics of the family Planorbidae in general is discussed.

Sign in / Sign up

Export Citation Format

Share Document