scholarly journals Removal Rates of NOx, SOx, and Fine Dust Particles in Textile Fabrics Coated with Zeolite and Coconut Shell Activated Carbon

2020 ◽  
Vol 10 (22) ◽  
pp. 8010
Author(s):  
Keun-Hyeok Yang ◽  
Ju-Hyun Mun ◽  
Jae-Uk Lee
Keyword(s):  
Removal Rate ◽  
Deionized Water ◽  
Coconut Shell ◽  
Dust Particles ◽  
Fine Dust ◽  
Removal Rates ◽  
Textile Fabrics ◽  
Content Ratio ◽  
Coconut Shell Activated Carbon ◽  
Epoxy Content

An effective dipping method for coating of textile fabrics with porous materials is proposed on the basis of the use of epoxy solution consisted of resins, crosslinkers, and dilution solutions. The removal rates of nitrogen oxides (NOx), sulfur oxides (SOx), and fine dust particles in the coated textile fabrics are accessed. The textile fabrics made of polyester are used to effectively reduce fine dust particles through static electricity. Zeolite and coconut shell activated carbon are used as porous material to reduce SOx and NOx, respectively. The effects of the epoxy content and dilution solution types on the SOx removal rate of textile fabrics coated with zeolite are evaluated to determine the optimum coating conditions. In addition, the effects of external environmental conditions, such as washing and freeze thawing, on the SOx and NOx removal rates of the textile fabrics coated with porous materials using the optimum coating conditions are examined. The test results show that the SOx removal rate of textile fabrics coated with zeolite decreases with the increase in the epoxy content. The decrease is 2.9 times larger for textile fabrics coated using deionized water than those coated using isopropyl alcohol. After one wash, the SOx removal rate decreases dramatically. However, the decrease is reduced by 16% when the epoxy content ratio is increased by 0.5%. The effects of washing and freeze thawing on the SOx and NOx removal rates of textile fabrics coated using the deionized water diluted with the epoxy content ratio of 2% are minimal. Consequently, to maintain stable SOx and NOx removal rates under external environmental conditions such as washing and freeze thawing, 98% deionized water dilution and 2% epoxy content ratio are required for the optimum coating of textile fabrics with zeolite and coconut shell activated carbon.

scholarly journals Removal Rates of NOx, SOx, and Fine Dust Particles in Textile Fabrics Coated with Zeolite and Coconut Shell Activated Carbon

2020 ◽  
Author(s):  
Keun-Hyeok Yang ◽  
Ju-Hyun Mun ◽  
Jae-Uk Lee
Keyword(s):  
Removal Rate ◽  
Deionized Water ◽  
Coconut Shell ◽  
Dust Particles ◽  
Fine Dust ◽  
Removal Rates ◽  
Textile Fabrics ◽  
Content Ratio ◽  
Coconut Shell Activated Carbon ◽  
Epoxy Content

An effective method for coating textile fabrics with porous materials is proposed, and the removal rates of nitrogen oxides (NOx), sulfur oxides (SOx), and fine dust particles in the coated textile fabrics are evaluated. The textile fabrics made of polyester are used to effectively reduce fine dust particles through static electricity. Zeolite and coconut shell activated carbon are used as porous material to reduce SOx and NOx, respectively. The effects of the epoxy content and dilution solution types on the SOx removal rate of textile fabrics coated with zeolite are evaluated to determine the optimum coating conditions. In addition, the effects of external environmental conditions, such as washing and freeze thawing, on the SOx and NOx removal rates of the textile fabrics coated with porous materials using the optimum coating conditions are examined. The test results show that the SOx removal rate of textile fabrics coated with zeolite decreases with the increase in the epoxy content. The decrease is 2.9 times larger for textile fabrics coated using deionized water than those coated using isopropyl alcohol. After one wash, the SOx removal rate decreases dramatically. However, the decrease is reduced by 16% when the epoxy content ratio is increased by 0.5%. The effects of washing and freeze thawing on the SOx and NOx removal rates of textile fabrics coated using the deionized water diluted with the epoxy content ratio of 2% are minimal. Consequently, to maintain stable SOx and NOx removal rates under external environmental conditions such as washing and freeze thawing, 98% deionized water dilution and 2% epoxy content ratio are required for the optimum coating of textile fabrics with zeolite and coconut shell activated carbon.

A Study on Adsorption Kinetics of Antimony onto Coconut Shell Activated Carbon

2013 ◽  
Vol 788 ◽  
pp. 471-475
Author(s):  
Zhi Bin Li ◽  
Ji Wei Hu ◽  
Su Ming Duan ◽  
Xian Fei Huang ◽  
Miao Jia ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Ph Value ◽  
Removal Rate ◽  
Coconut Shell ◽  
Affecting Factors ◽  
Activated Carbon Adsorption ◽  
Solution Ph ◽  
Antimony Content ◽  
Coconut Shell Activated Carbon ◽  
Two Stages

The affecting factors and kinetic characteristics of antimony (Sb) adsoption onto a type of the coconut shell activated carbon were investigated in this study. The results showed that: the Sb adsorption obeyed the pseudo-second-order kinetics equation, and the coefficients of determination (R2) were higher than 0.97, inferring that this process was mainly the monolayer chemical adsorption. With the reduction of the particle size, the adsorption capacity of activated carbon gradually increased. With the increase of temperature, activated carbon adsorption of antimony content increased gradually, but on the whole the temperature had a limited effect on the adsorption of activated carbon. Effect of the solution pH on antimony adsorption onto the activated carbon was mainly divided into the following two stages: with a pH value of 1 to 3, antimony removal rate was about 60%, and with a pH value of 5 to 11, the removal rate was about 20%.

Analysis of organic removal rates in the aerated submerged fixed film process

1998 ◽  
Vol 38 (8-9) ◽  
pp. 213-221 ◽  
Author(s):  
Mohamed F. Hamoda ◽  
Ibrahim A. Al-Ghusain
Keyword(s):  
Pilot Plant ◽  
Removal Rate ◽  
Domestic Wastewater ◽  
Removal Rates ◽  
Hydraulic Loading ◽  
Organic Removal ◽  
Wide Range ◽  
Fixed Film ◽  
Cod Removal Rate ◽  
And Performance

Performance data from a pilot-plant employing the four-stage aerated submerged fixed film (ASFF) process treating domestic wastewater were analyzed to examine the organic removal rates. The process has shown high BOD removal efficiencies (> 90%) over a wide range of hydraulic loading rates (0.04 to 0.68 m3/m2·d). It could also cope with high hydraulic and organic loadings with minimal loss in efficiency due to the large amount of immobilized biomass attained. The organic (BOD and COD) removal rate was influenced by the hydraulic loadings applied, but organic removal rates of up to 104 kg BOD/ m2·d were obtained at a hydraulic loading rate of 0.68 m3/m2·d. A Semi-empirical model for the bio-oxidation of organics in the ASFF process has been formulated and rate constants were calculated based on statistical analysis of pilot-plant data. The relationships obtained are very useful for analyzing the design and performance of the ASFF process and a variety of attached growth processes.

The comparison of trichloroethylene removal rates by methane- and aromatic-utilizing microorganisms

1998 ◽  
Vol 38 (7) ◽  
pp. 19-24 ◽  
Author(s):  
C.-J. Lu ◽  
C. M. Lee ◽  
M.-S. Chung
Keyword(s):  
Cell Concentration ◽  
Removal Rate ◽  
Carbon Sources ◽  
Batch Reactors ◽  
Initial Cell Concentration ◽  
Removal Rates ◽  
Initial Cell ◽  
Toluene Concentration ◽  
Cell Source ◽  
Removal Efficiencies

The comparison of TCE cometabolic removal by methane, toluene, and phenol utilizers was conducted with a series of batch reactors. Methane, toluene, or phenol enriched microorganisms were used as cell source. The initial cell concentration was about 107 cfu/mL. Methane, toluene, and phenol could be readily biodegraded resulting in the cometabolic removal of TCE. Among the three primary carbon sources studied, the presence of phenol provided the best cometabolic removal of TCE. When the concentration of carbon source was 3 mg-C/L, the initial TCE removal rates initiated by methane, toluene, and phenol utilizers were 1.5, 30, and 100 μg/L-hr, respectively. During the incubation period of 80 hours, TCE removal efficiencies were 26% and 96% with the presence of methane and toluene, respectively. However, it was 100% within 20 hours with the presence of phenol. For phenol utilizers, the initial TCE removal rates were about the same, when the phenol concentrations were 1.35, 2.7, and 4.5 mg/L. However, TCE removal was not proportional to the concentrations of phenol. TCE removal was hindered when the phenol concentration was higher than 4.5 mg/L because of the rapid depletion of dissolved oxygen. The presence of toluene also initiated cometabolic removal of TCE. The presence of toluene at 3 and 5 mg/L resulted in similar TCE removal. The initial TCE removal rate was about 95 μg/L-hr at toluene concentrations of 3 and 5 mg/L compared to 20 μg/L-hr at toluene concentration of 1 mg/L.

Relations between carbon removal rates, biofilm size and density of a novel anaerobic reactor: the inverse turbulent bed

2000 ◽  
Vol 41 (4-5) ◽  
pp. 253-260 ◽  
Author(s):  
P. Buffière ◽  
R. Moletta
Keyword(s):  
Removal Rate ◽  
Removal Rates ◽  
Carbon Removal ◽  
Biofilm Growth ◽  
Loading Rates ◽  
Biomass Activity ◽  
High Turbulence ◽  
The One ◽  
High Level ◽  
Very High

An anaerobic inverse turbulent bed, in which the biogas only ensures fluidisation of floating carrier particles, was investigated for carbon removal kinetics and for biofilm growth and detachment. The range of operation of the reactor was kept within 5 and 30 kgCOD· m−3· d−1, with Hydraulic Retention Times between 0.28 and 1 day. The carbon removal efficiency remained between 70 and 85%. Biofilm size were rather low (between 5 and 30 μm) while biofilm density reached very high values (over 80 kgVS· m−3). The biofilm size and density varied with increasing carbon removal rates with opposite trends; as biofilm size increases, its density decreases. On the one hand, biomass activity within the reactor was kept at a high level, (between 0.23 and 0.75 kgTOC· kgVS· d−1, i.e. between 0.6 and 1.85 kgCOD·kgVS · d−1).This result indicates that high turbulence and shear may favour growth of thin, dense and active biofilms. It is thus an interesting tool for biomass control. On the other hand, volatile solid detachment increases quasi linearly with carbon removal rate and the total amount of solid in the reactor levels off at high OLR. This means that detachment could be a limit of the process at higher organic loading rates.

PHYTOMONITORING AS A METOD OF THE ASSESSMENT OF ATMOSPHERIC AIR POLLUTION BY URBAN ENVIRONMENT BY FINE DUST

2019 ◽  
pp. 42-53
Author(s):  
Irina Glinyanova ◽  
Valery Azarov ◽  
Valery Fomichev
Keyword(s):  
Urban Environment ◽  
Urban Areas ◽  
Fine Particles ◽  
Prunus Armeniaca ◽  
Dust Particles ◽  
Fine Dust ◽  
Control Zone ◽  
Atmospheric Air ◽  
Random Functions ◽  
The City

Fine dust: (PM2.5, PM10) is a priority pollutant that contributes to the development of numerous dis-eases in urban areas. The purpose of this scientific work is to study the dispersed composition of dust parti-cles on the leaves of apricot trees (Prúnus armeníaca) in the residential zone of Volgograd. The novelty of the work lies in the study of the dispersed composition of dust particles on the leaves of apricot trees (Prúnus armeníaca) in the residential zone in the city of Volgograd near the construction industry enterprise, me-chanical engineering, leather production and railway transport line in comparison with the conditionally clean (control) zone of the SNT “Orocenets” ”(Sovetsky District, Volgograd) from the standpoint of random functions expressed by integral distribution curves of the mass of particles over their equivalent diameters. As a result of the research, the dispersed composition of dust on the leaves of apricot trees (Prúnus ar-meníaca) in the residential area of Volgograd was revealed. Fine particles were found: PM2.5, PM10 in each of the studied points, which by their values, both in their number and mass fraction, significantly exceed the data on fine dust in a conditionally clean area (control) in the SNT “Oroshanets” (Sovetsky district Volgo-grad), which creates certain environmental risks for local residents. The dispersed analysis of particles from the standpoint of random functions in the future will allow with a sufficiently high degree of accuracy to pre-dict the dust content of urban atmospheric air in the range of monthly and / or seasonal average values compared to the traditional measurement of fine dust concentration in atmospheric air of the urban environ-ment as the maximum single or daily average. At the same time, further studies of dust on the leaves of plants in an urban environment, namely, the study of the density of its sedimentation, will also reveal a group of ur-ban plants that are best suited to retain PM2.5 and PM10 on leaf plates in this region, which can significantly increase the quality of the atmospheric air of the urban environment and be of a recommendatory nature for the state-owned landscaping services of the city of Volgograd when improving the green areas of a megacity.

scholarly journals Quantitative analysis of fine dust particles on moss surfaces under laboratory conditions using the example of Brachythecium rutabulum

2021 ◽  
Author(s):  
Bilitis Désirée Vanicela ◽  
Martin Nebel ◽  
Marielle Stephan ◽  
Christoph Riethmüller ◽  
Götz Theo Gresser
Keyword(s):  
Fine Fraction ◽  
Model Organism ◽  
Dust Particles ◽  
Quantitative Detection ◽  
Suitable Model ◽  
Fine Dust ◽  
Sem Images ◽  
Moss Species ◽  
Laboratory Conditions ◽  
Number Of Particles

AbstractThe identification of a model organism for investigations of fine dust deposits on moss leaflets was presented. An optical method with SEM enabled the quantitative detection of fine dust particles in two orders of magnitude. Selection criteria were developed with which further moss species can be identified in order to quantify the number of fine dust particles on moss surfaces using the presented method. Among the five moss species examined, B. rutabulum had proven to be the most suitable model organism for the method presented here. The number of fine dust particles on the moss surface of B. rutabulum was documented during 4 weeks of cultivation in the laboratory using SEM images and a counting method. The fine dust particles were recorded in the order of 10 μm–0.3 μm, divided into two size classes and counted. Under laboratory conditions, the number of particles of the fine fraction 2.4 μm–0.3 μm decreased significantly.

scholarly journals Enhanced Wastewater Treatment by Immobilized Enzymes

2021 ◽  
Author(s):  
Jakub Zdarta ◽  
Katarzyna Jankowska ◽  
Karolina Bachosz ◽  
Oliwia Degórska ◽  
Karolina Kaźmierczak ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Process Optimization ◽  
Organic Pollutants ◽  
Large Scale ◽  
Removal Rate ◽  
Immobilized Enzymes ◽  
Future Research ◽  
Process Conditions ◽  
Removal Rates ◽  
Catalytic Cycles

Abstract Purpose of Review In the presented review, we have summarized recent achievements on the use of immobilized oxidoreductases for biodegradation of hazardous organic pollutants including mainly dyes, pharmaceuticals, phenols, and bisphenols. In order to facilitate process optimization and achievement of high removal rates, effect of various process conditions on biodegradation has been highlighted and discussed. Recent Findings Current reports clearly show that immobilized oxidoreductases are capable of efficient conversion of organic pollutants, usually reaching over 90% of removal rate. Further, immobilized enzymes showed great recyclability potential, allowing their reuse in numerous of catalytic cycles. Summary Collected data clearly indicates immobilized oxidoreductases as an efficient biocatalytic tools for removal of hazardous phenolic compounds, making them a promising option for future water purification. Data shows, however, that both immobilization and biodegradation conditions affect conversion efficiency; therefore, process optimization is required to achieve high removal rates. Nevertheless, we have demonstrated future trends and highlighted several issues that have to be solved in the near-future research, to facilitate large-scale application of the immobilized oxidoreductases in wastewater treatment.

Lubricant Removal, Degradation, and Recovery on Particulate Magnetic Recording Media

1992 ◽  
Vol 114 (1) ◽  
pp. 61-67 ◽  
Author(s):  
V. J. Novotny ◽  
T. E. Karis ◽  
N. W. Johnson
Keyword(s):  
Bulk Viscosity ◽  
Magnetic Recording ◽  
Photoelectron Spectroscopy ◽  
Removal Rate ◽  
Lateral Diffusion ◽  
Recording Media ◽  
Magnetic Recording Media ◽  
Removal Rates ◽  
Linear Chains ◽  
Mechanical Durability

Lubrication of particulate magnetic recording media improves their mechanical durability in sliding and flying by several orders of magnitude compared with unlubricated media. Lubricant removal, degradation, and recovery were studied using microslit scanning Fourier transform infrared spectroscopy and microspot scanning X-ray photoelectron spectroscopy. These techniques measure the total and surface lubricant amounts in the porous film, respectively. Lubricant dynamics were compared for two physisorbed polyperfluoroalkylether lubricants of similar molecular weight but different molecular structure—Y with a CF3 side group and Z with linear chains. The bulk viscosity of Y was about ten times higher than the viscosity of Z. In sliding, the lubricant removal rate of Y was significantly higher than that of Z while in flying the removal rates were reversed. Removal rates in sliding were orders of magnitude higher than those in flying. Effective lateral diffusion coefficients estimated from the rate of lubricant reflow back to the depleted tracks were close to inversely proportional to the bulk viscosity. During sliding and flying both lubricants degraded as evidenced by chemically altered lubricant detected on the surfaces after dissolution of undegraded lubricant.

Sign in / Sign up

Export Citation Format

Share Document