scholarly journals Influence of Powder and Liquid Multi-Wall Carbon Nanotubes on Hydration and Dispersion of the Cementitious Composites

2020 ◽  
Vol 10 (21) ◽  
pp. 7948
Author(s):  
Gun-Cheol Lee ◽  
Youngmin Kim ◽  
Seongwon Hong
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Resistance ◽  
Cementitious Composites ◽  
Self Monitoring ◽  
Multi Wall Carbon Nanotubes ◽  
Uniform Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Dispersion Solution ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Two types of multi-walled carbon nanotubes (MWCNTs), powder and liquid, were added to cementitious composites to build self-sensing concrete. To properly evaluate and quantify the effect of MWCNTs on electrical resistance, various tests, including isothermal conduction calorimetry, were carried out. One of primary issues of self-monitoring concrete is dispersion, so ultrasonication was used to properly mix the CNTs in the dispersion solution, and silica fume was employed to make the specimens. Scanning electron microscopy (SEM), Raman spectroscopy, and porosity analyses were performed to investigate the physical properties of the composites and to confirm uniform dispersion. The distance of the electrical resistance was also measured, and the dosages and types of MWCNTs were analyzed.

Incorporation of Multi Wall Carbon Nanotubes into Glass-Surfaces via Laser-Treatment

2003 ◽  
Vol 772 ◽  
Author(s):  
T. Seeger ◽  
G. de la Fuente ◽  
W.K. Maser ◽  
A.M. Benito ◽  
A. Righi ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Continuous Wave ◽  
Silica Surface ◽  
Multi Wall Carbon Nanotubes ◽  
Composite Formation ◽  
Multi Walled Carbon Nanotubes ◽  
Glass Surfaces ◽  
Walled Carbon Nanotubes ◽  
First Time ◽  
Scanning Electron

AbstractCarbon nanotubes (CNT) are interesting candidates for the reinforcement in robust composites and for conducting fillers in polymers due to their fascinating electronic and mechanical properties. For the first time, we report the incorporation of multi walled carbon nanotubes (MWNTs) into silica-glass surfaces by means of partial surface-melting caused by a continuous wave Nd:YAG laser. MWNTs were detected being well incorporated in the silica-surface. The composites are characterized using scanning electron microscopy (SEM) and Raman-spectroscopy. A model for the composite-formation is proposed based on heatabsorption by MWNTs and a partial melting of the silica-surface.

Photovoltaic properties of multi walled carbon nanotubes - poly(3-octathiophene) conducting polymer blends structures

2013 ◽  
Vol 1493 ◽  
pp. 139-144 ◽  
Author(s):  
Punya A. Basnayaka ◽  
Pedro Villalba ◽  
Manoj K. Ram ◽  
Lee Stefanakos ◽  
Ashok Kumar
Keyword(s):  
Carbon Nanotubes ◽  
Electron Microscope ◽  
Conducting Polymer ◽  
Photoelectrochemical Cell ◽  
Photovoltaic Properties ◽  
Multi Wall Carbon Nanotubes ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

AbstractIn the present study, we have studied photoelectrochemical properties of poly(3-octathiophene) (P3OT), blending with multi-wall carbon nanotubes (MWCNTs). P3OT blended with MWCNTs was characterized using Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Raman spectroscope, and Cyclic Voltammetry (CV) techniques, respectively. The photoelectrochemical current of the MWCNs-P3OT based cell under illumination was investigated by applying a voltage. The blend consisting of 10% MWCNTs in P3OT gave the promising photocurrent in 0.2 M tetra-butyl-ammonium-tetrafluoroborate (TBATFB), electrolyte. Experimental results indicate that photocurrent obtained from MWCNT-P3OT was three times higher than simple P3OT-based conducting polymer. The electrochemical responses of MWCNT-P3OT films in different electrolytes such as 0.2M TBATFB, 0.2 M LiClO4, 1 M H2SO4 and 0.2 M LiBF6 were investigated for comparative photocurrent properties of the photoelectrochemical cell.

Effect of functionalized multi-walled carbon nanotubes on physicomechanical properties of silicone rubber nanocomposites

2019 ◽  
Vol 53 (22) ◽  
pp. 3157-3168 ◽  
Author(s):  
Milind Shashikant Tamore ◽  
Debdatta Ratna ◽  
Satyendra Mishra ◽  
Navinchandra Gopal Shimpi
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Electron Microscope ◽  
Silicone Rubber ◽  
Rubber Matrix ◽  
Uniform Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Rubber Nanocomposites ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Ethyl-4-aminocinnamate functionalized multi-walled carbon nanotubes–reinforced silicone rubber nanocomposites were developed by means of compounding (two roll-mill) and molding (compression). Meanwhile, multi-walled carbon nanotubes were synthesized using a catalytic chemical vapor deposition technique and functionalized using ethyl-4-aminocinnamate. The as-synthesized and functionalized multi-walled carbon nanotubes were subjected to Raman spectroscopy, Fourier-transform infrared spectroscopy, field emission scanning electron microscope, and transmission electron microscopy to know the presence of the functional group with its shape and size. Further, silicone rubber nanocomposites were subjected to study its mechanical (tensile strength, Young's modulus, and elongation at break), thermal (stability), and physical (swelling index and hardness) properties. The amount of loading of functionalized multi-walled carbon nanotubes was from 0 to 1 wt%. It was observed that with the increase in the amount of functionalized multi-walled carbon nanotubes loading, the properties were found to be increased. This improvement was due to uniform dispersion with the alignment of functionalized multi-walled carbon nanotubes inside the rubber matrix. Moreover, this improvement was due to weak functionalizing materials which make the surface smooth and glossy so as to facilitate uniform dispersion of materials. Also, thermal stability was found to be increased due to shifting of heat uniformly throughout the rubber matrix. Certainly, it reduces the swelling indices of silicone rubber as the chains are closely packed which does not allow a solution to get penetrated. This improvement in properties of silicone rubber nanocomposites was reflected from field emission scanning electron microscope, which shows uniform dispersion with the alignment of functionalized multi-walled carbon nanotubes inside the rubber matrix.

scholarly journals Stabilizing effect of methylcellulose on the dispersion of multi-walled carbon nanotubes in cementitious composites

2020 ◽  
Vol 9 (1) ◽  
pp. 93-104
Author(s):  
Mingrui Du ◽  
Yuan Gao ◽  
Guansheng Han ◽  
Luan Li ◽  
Hongwen Jing
Keyword(s):  
Carbon Nanotubes ◽  
Pore Solution ◽  
Cementitious Materials ◽  
High Ionic Strength ◽  
Cementitious Composites ◽  
Uniform Distributions ◽  
Stabilizing Effect ◽  
Multi Walled Carbon Nanotubes ◽  
The Stability ◽  
Walled Carbon Nanotubes

AbstractMulti-walled carbon nanotubes (MWCNTs) have been added in the plain cementitious materials to manufacture composites with the higher mechanical properties and smart behavior. The uniform distributions of MWCNTs is critical to obtain the desired enhancing effect, which, however, is challenged by the high ionic strength of the cement pore solution. Here, the effects of methylcellulose (MC) on stabilizing the dispersion of MWCNTs in the simulated cement pore solution and the viscosity of MWCNT suspensions werestudied. Further observations on the distributions of MWCNTs in the ternary cementitious composites were conducted. The results showed that MC forms a membranous envelope surrounding MWCNTs, which inhibits the adsorption of cations and maintains the steric repulsion between MWCNTs; thus, the stability of MWCNT dispersion in cement-based composites is improved. MC can also work as a viscosity adjuster that retards the Brownian mobility of MWCNTs, reducing their re-agglomerate within a period. MC with an addition ratio of 0.018 wt.% is suggested to achieve the optimum dispersion stabilizing effect. The findings here provide a way for stabilizing the other dispersed nano-additives in the cementitious composites.

Kinetics and thermodynamics of the sorption of furaltadone from aqueous solutions on magnetic multi-walled carbon nanotubes

2014 ◽  
Vol 70 (6) ◽  
pp. 964-971
Author(s):  
Xu Chen ◽  
Zhen-hu Xiong
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solutions ◽  
Sorption Data ◽  
Multi Wall Carbon Nanotubes ◽  
Adsorption Behaviors ◽  
Different Temperatures ◽  
Multi Walled Carbon Nanotubes ◽  
Pseudo Second Order ◽  
Experimental Data Analysis ◽  
Walled Carbon Nanotubes

Magnetic multi-wall carbon nanotubes (M-MWCNTs) were used as an adsorbent for removal of furaltadone from aqueous solutions, and the adsorption behaviors were investigated by varying pH, sorbent amount, sorption time and temperature. The results showed that the adsorption efficiency of furaltadone reached 97% when the dosage of M-MWCNT was 0.45 g · L−1, the pH was 7 and the adsorption time was 150 min. The kinetic data showed that the pseudo-second-order model can fit the adsorption kinetics. The sorption data could be well explained by the Langmuir model under different temperatures. The adsorption process was influenced by both intraparticle diffusion and external mass transfer. The experimental data analysis indicated that the electrostatic attraction and π–π stacking interactions between M-MWCNT and furaltadone might be the adsorption mechanism. Thermodynamic analysis reflected that adsorption of furaltadone on the M-MWCNT was spontaneous and exothermic. Our study showed that M-MWCNTs can be used as a potential adsorbent for removal of furaltadone from water and wastewater.

Two-step synthesis of polyurethane/multi-walled carbon nanotubes polymer composite to achieve high percentage particle reinforcement for mechanical applications

2021 ◽  
pp. 002199832199945
Author(s):  
Dinesh Kumar ◽  
Suneev Anil Bansal ◽  
Navin Kumar ◽  
Prashant Jindal
Keyword(s):  
Carbon Nanotubes ◽  
Synthesis Method ◽  
Step Method ◽  
Molding Method ◽  
Uniform Dispersion ◽  
Noticeable Improvement ◽  
Multi Walled Carbon Nanotubes ◽  
Mixing Method ◽  
Compressive Testing ◽  
Walled Carbon Nanotubes

The present work has been aimed to synthesize Polyurethane (PU)/Multi-Walled Carbon Nanotubes (MWCNTs) composite using a two-step method to enhance mechanical properties. In the first step, films (0.2 mm thickness) have been synthesized using a solution mixing method to disperse MWCNTs in the PU matrix. In the second step, thin films of uniformly dispersed MWCNTs in the PU matrix have been compression molded to synthesize PU/MWCNTs composite required for real mechanical applications. The two-step method has the advantages of solution mixing as well as compression molding method. The results of quasi-static nanoindentation tests indicated that in comparison to pure PU, elastic modulus and hardness have been enhanced by 124% and 53% respectively for 10 wt% PU/MWCNTs composite. Fracture resistance of PU/MWCNTs composites, with 7 wt% of MWCNTs, has been enhanced by 52% as compared to pure PU. To understand bulk behavior, nanoindentation results have been cross-verified with compression testing. Results of compressive testing shown that the modulus of composite material has been significantly improved under the influence of the increasing composition of MWCNTs. A noticeable improvement of 52% has been observed in compressive modulus of 10 wt% composite in equivalence to pure PU. The overall improvement in mechanical behavior has been attributed to the uniform dispersion of MWCNTs in the PU matrix by the two-step synthesis method.

scholarly journals Polymeric Composites Based on Polyurea Matrix Reinforced with Carbon Nanotubes

2017 ◽  
Vol 54 (1) ◽  
pp. 41-44 ◽  
Author(s):  
Maria Adina Vulcan ◽  
Celina Damian ◽  
Paul Octavian Stanescu ◽  
Eugeniu Vasile ◽  
Razvan Petre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This paper deals with the synthesis of polyurea and its use as polymer matrix for nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Two types of materials were obtained during this research, the first cathegory uses the polyurea as matrix and the second one uses a mixture between epoxy resin and polyurea. The nanocomposites were characterized by Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Scanning Electron Microscopy (SEM) and Tensile Tests .The elastomeric features of nanocomposites were highlighted by the results which showed low value of Tg. Also higher thermal stability with ~40oC compared with commercial products (M20) were observed, but lower mechanical properties compared to neat polyurea.

scholarly journals PRELIMINARY STUDY OF ELECTROPHORETIC DEPOSITION OF VERTICALLY ALIGNED MWCNT ON METALLIC ELECTRODE

2012 ◽  
Vol 05 ◽  
pp. 704-711
Author(s):  
SIAVASH KHABAZIAN ◽  
SOHRAB SANJABI
Keyword(s):  
Carbon Nanotubes ◽  
Metallic Electrode ◽  
Aqueous Solvent ◽  
Multi Walled Carbon Nanotubes ◽  
Dc Electric Field ◽  
Ft Ir ◽  
Vertically Aligned ◽  
Preliminary Study ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Multi-walled carbon nanotubes films formed randomly aligned laterally by electrophoresis. Multi-walled carbon nanotubes with lengths of about 10 μ was shortened and functionalized by a mixture of sulfuric and nitric acid. The functional groups on carbon nanotubes were elaborated by FT-IR. Chemically shortened MWCNTs disperse in organic and aqueous solvent and deposited on electrode vertically-aligned by applying a constant DC electric field. The alignment of MWCNTs was observed by scanning electron microscopy. It also the effect of various substrates on alignment of multi-walled carbon nanotubes was investigated.

Highly sensitive compression sensors using three-dimensional printed polydimethylsiloxane/carbon nanotube nanocomposites

2019 ◽  
Vol 30 (8) ◽  
pp. 1216-1224 ◽  
Author(s):  
Mohammad Charara ◽  
Mohammad Abshirini ◽  
Mrinal C Saha ◽  
M Cengiz Altan ◽  
Yingtao Liu
Keyword(s):  
Carbon Nanotubes ◽  
Electron Microscope ◽  
Carbon Nanotube ◽  
Scanning Electron Microscope ◽  
Three Dimensional ◽  
Multi Walled Carbon Nanotube ◽  
Highly Sensitive ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This article presents three-dimensional printed and highly sensitive polydimethylsiloxane/multi-walled carbon nanotube sensors for compressive strain and pressure measurements. An electrically conductive polydimethylsiloxane/multi-walled carbon nanotube nanocomposite is developed to three-dimensional print compression sensors in a freestanding and layer-by-layer manner. The dispersion of multi-walled carbon nanotubes in polydimethylsiloxane allows the uncured nanocomposite to stand freely without any support throughout the printing process. The cross section of the compression sensors is examined under scanning electron microscope to identify the microstructure of nanocomposites, revealing good dispersion of multi-walled carbon nanotubes within the polydimethylsiloxane matrix. The sensor’s sensitivity was characterized under cyclic compression loading at various max strains, showing an especially high sensitivity at lower strains. The sensing capability of the three-dimensional printed nanocomposites shows minimum variation at various applied strain rates, indicating its versatile potential in a wide range of applications. Cyclic tests under compressive loading for over 8 h demonstrate that the long-term sensing performance is consistent. Finally, in situ micromechanical compressive tests under scanning electron microscope validated the sensor’s piezoresistive mechanism, showing the rearrangement, reorientation, and bending of the multi-walled carbon nanotubes under compressive loads, were the main reasons that lead to the piezoresistive sensing capabilities in the three-dimensional printed nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document