scholarly journals Effect of Fiber-Reinforced Composite and Elastic Post on the Fracture Resistance of Premolars with Root Canal Treatment—An In Vitro Pilot Study

2020 ◽  
Vol 10 (21) ◽  
pp. 7616
Author(s):  
Jesús Mena-Álvarez ◽  
Rubén Agustín-Panadero ◽  
Alvaro Zubizarreta-Macho
Keyword(s):  
Glass Fiber ◽  
Root Canal ◽  
Fracture Resistance ◽  
Root Canal Treatment ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Direct Restoration ◽  
Restorative Materials

(1) Background: To analyze the fracture resistance of endodontically upper premolar teeth restored with glass fiber reinforced posts, glass fiber elastic posts, conventional composite resin (CR) and glass fiber reinforced composite (FRC) resins as restorations. (2) Methods: Seventy premolars were submitted to root canal treatment and restored with the following restorative materials (n = 10): A. FRC posts restored with resin; B. Elastic FRC posts restored with resin; C. FRC posts restored with FRC resin; D. Elastic FRC posts restored with FRC resin; E. Direct restoration with resin; F. Direct restoration with FRC resin; G. Untreated teeth. The teeth were embedded in an epoxy resin model, thermal cycling fatigued in distilled water and mechanical cycling fatigued inducing 80 N load. Loading was applied axially on the center of the occlusal surface with a vertical displacement. The fracture was produced by a universal machine at a crosshead speed of 0.5 mm/s with a 5000 N load cell. The results were analyzed by ANOVA and Tukey’s test and Weibull characteristic strength and modulus were calculated. (3) Results: The group that obtained the greatest fracture resistance was D (3620 ± 470 N) and the least resistant was group A (2420 ± 1010 N). Statistically significant differences were observed between the groups restored with Elastic FRC posts-CR versus FRC post-CR and only CR (p = 0.043 and p = 0.008). (4) Conclusions: The glass fiber reinforced restorative materials increase the fracture resistance of endodontically treated teeth.

The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures

2021 ◽  
pp. 096739112110141
Author(s):  
Ferhat Ceritbinmez ◽  
Ahmet Yapici ◽  
Erdoğan Kanca
Keyword(s):  
Composite Materials ◽  
Glass Fiber ◽  
Composite Structures ◽  
Fiber Composite ◽  
Cutting Speed ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Composite Layers

In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs additive in the composite production, the strength of the material has been changed and the more durable composite materials have been obtained. Slots were opened with different cutting speed and feed rate parameters to the composite layers. Surface roughness of the composite layers and slot size were examined and also abrasions of cutting tools used in cutting process were determined. It was observed that the addition of nanoparticles to the laminated glass fiber composite materials played an effective role in the strength of the material and caused cutting tool wear.

scholarly journals Fatigue performance of nanoclay filled glass fiber reinforced hybrid composite laminate

2017 ◽  
Author(s):  
◽  
John Olumide Olusanya
Keyword(s):  
Fatigue Life ◽  
Service Life ◽  
Glass Fiber ◽  
Residual Strength ◽  
Composite Structures ◽  
Fatigue Performance ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced

In this study, the fatigue life of fiber reinforced composite (FRC) materials system was investigated. A nano-filler was used to increase the service life of the composite structures under cyclical loading since such structures require improved structural integrity and longer service life. Behaviour of glass fiber reinforced composite (GFRC) enhanced with various weight percentages (1 to 5 wt. %) of Cloisite 30B montmorillonite (MMT) clay was studied under static and fatigue loading. Epoxy clay nanocomposite (ECN) and hybrid nanoclay/GFRC laminates were characterised using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The mechanical properties of neat GFRC and hybrid nanoclay/GFRC laminates were evaluated. Fatigue study of the composite laminates was conducted and presented using the following parameter; matrix crack initiation and propagation, interfacial debonding, delamination and S–N relationship. Residual strength of the materials was evaluated using DMA to determine the reliability of the hybrid nanoclay/GFRC laminates. The results showed that ECN and hybrid nanoclay/GFRC laminates exhibited substantial improvement in most tests when compared to composite without nanoclay. The toughening mechanism of the nanoclay in the GFRC up to 3 wt. % gave 17%, 24% and 56% improvement in tensile, flexural and impact properties respectively. In the fatigue performance, less crack propagations was found in the hybrid nanoclay/GFRC laminates. Fatigue life of hybrid nanoclay/GFRC laminate was increased by 625% at the nanoclay addition up to 3 wt. % when compared to neat GFRC laminate. The residual strength of the composite materials revealed that hybrid nanoclay/GFRC showed less storage modulus reduction after fatigue. Likewise, a positive shift toward the right was found in the tan delta glass transition temperature (Tg) of 3 wt. % nanoclay/GFRC laminate after fatigue. It was concluded that the application of nanoclay in the GFRC improved the performance of the material. The hybrid nanoclay/GFRC material can therefore be recommended mechanically and thermally for longer usage in structural application.

Sign in / Sign up

Export Citation Format

Share Document