scholarly journals On Effective Bending Stiffness of a Laminate Nanoplate Considering Steigmann–Ogden Surface Elasticity

2020 ◽  
Vol 10 (21) ◽  
pp. 7402 ◽  
Author(s):  
Victor A. Eremeyev ◽  
Tomasz Wiczenbach

As at the nanoscale the surface-to-volume ratio may be comparable with any characteristic length, while the material properties may essentially depend on surface/interface energy properties. In order to get effective material properties at the nanoscale, one can use various generalized models of continuum. In particular, within the framework of continuum mechanics, the surface elasticity is applied to the modelling of surface-related phenomena. In this paper, we derive an expression for the effective bending stiffness of a laminate plate, considering the Steigmann–Ogden surface elasticity. To this end, we consider plane bending deformations and utilize the through-the-thickness integration procedure. As a result, the calculated elastic bending stiffness depends on lamina thickness and on bulk and surface elastic moduli. The obtained expression could be useful for the description of the bending of multilayered thin films.

2016 ◽  
Vol 01 (03n04) ◽  
pp. 1640012 ◽  
Author(s):  
Y. Mikata

Effective material properties of a composite with spheroidal and ellipsoidal inhomogeneities in an isotropic matrix are investigated analytically using the dilute approximation and the Mori–Tanaka approximation together with the Eshelby's equivalent inclusion method. Both uniaxially aligned and uniformly randomly oriented spheroidal and ellipsoidal inhomogeneities are treated. For a spheroid, both oblate and prolate spheroidal inhomogeneities are considered. It is analytically shown that a composite with uniaxially aligned anisotropic ellipsoidal inhomogeneities in an isotropic matrix is anisotropic in general in thermal conductivity. It is also analytically shown that a composite with uniformly randomly oriented anisotropic ellipsoidal inhomogeneities in an isotropic matrix is exactly isotropic in thermal conductivity. Various special cases are also treated for the effective thermal conductivity of a composite with ellipsoidal and spheroidal inhomogeneities. Similar results are also obtained for the effective elastic moduli. Newly obtained expressions for the effective elastic moduli of a composite with isotropic spheroidal inhomogeneities are rather involved. Conversely, an effective thermal conductivity of a composite with anisotropic ellipsoidal inhomogeneities is relatively simple. An effective thermal conductivity of a composite with isotropic spheroidal inhomogeneities reduces to a known result (Kerner, E. H. [1956] “The electrical conductivity of composite media,” Proceedings of the Physical Society London Section B 69, 802–807; Hashin, Z. and Shtrikman, S. [1962] “A variational approach to the theory of the effective magnetic permeability of multiphase materials,” Journal of Applied Physics 33, 3125–3131.) as the spheroid aspect ratio approaches 1 (i.e., a sphere). The effective thermal conductivity of a composite with uniformly randomly oriented isotropic spheroidal inhomogeneities in an isotropic matrix obtained in this paper as a special case is similar to the one obtained by Hatta and Taya (Hatta, H. and Taya, M. [1985] “Effective thermal conductivity of a misoriented short fiber composite,” Journal Applied Physics 58, 2478–2486.) in some respects, but is different. Numerical results are shown for a composite with oblate spheroidal voids in an isotropic matrix.


Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3165-3196 ◽  
Author(s):  
Joonkyo Jung ◽  
Hyeonjin Park ◽  
Junhyung Park ◽  
Taeyong Chang ◽  
Jonghwa Shin

AbstractMetamaterials can possess extraordinary properties not readily available in nature. While most of the early metamaterials had narrow frequency bandwidth of operation, many recent works have focused on how to implement exotic properties and functions over broad bandwidth for practical applications. Here, we provide two definitions of broadband operation in terms of effective material properties and device functionality, suitable for describing materials and devices, respectively, and overview existing broadband metamaterial designs in such two categories. Broadband metamaterials with nearly constant effective material properties are discussed in the materials part, and broadband absorbers, lens, and hologram devices based on metamaterials and metasurfaces are discussed in the devices part.


1987 ◽  
Vol 109 (1) ◽  
pp. 82-86 ◽  
Author(s):  
V. K. Stokes

Because material properties vary from point to point in nonhomogeneous materials, there is some question as to what “properties” are measured in tests such as the tensile test, and how such “properties” can be used in the mechanical design process. In this paper, the mechanical response of nonhomogeneous prismatic bars in pure bending has been shown to depend on parameters that are strongly coupled combinations of geometry and material properties. The purely geometry based inertia tensor in homogeneous beam theory is replaced in the nonhomogeneous case by the rigidity tensor, which combines geometry and material properties. Interpretations for the average elastic moduli, which would be determined by tests on nonhomogeneous materials, have been explored. Also discussed is the usefulness of such average moduli for predicting the mechanical response of nonhomogeneous bars.


Author(s):  
Ji-Hong Zhu ◽  
Wei-Hong Zhang

The purpose of this paper is to give an overall introduction of the structural optimization research works in ESAC group in 2011. Four main topics are involved, i.e. 1) topology optimization with multiphase materials, 2) integrated layout and topology optimization, 3) prediction of effective material properties and 4) composite design. More detailed techniques and some numerical results are also presented and discussed here.


2021 ◽  
Vol 1034 ◽  
pp. 193-198
Author(s):  
Pana Suttakul ◽  
Thongchai Fongsamootr ◽  
Duy Vo ◽  
Pruettha Nanakorn

Two-dimensional lattices are widely used in many engineering applications. If 2D lattices have large numbers of unit cells, they can be accurately modeled as 2D homogeneous solids having effective material properties. When the slenderness ratios of struts in these 2D lattices are low, the effects of shear deformation on the values of the effective material properties can be significant. This study aims to investigate the effects of shear deformation on the effective material properties of 2D lattices with hexagonal unit cells, by using the homogenization method based on equivalent strain energy. Several topologies of hexagonal unit cells and several slenderness ratios of struts are considered. The effects of struts’ shear deformation on the effective material properties are examined by comparing the results of the present study, in which shear deformation is neglected, with those from the literature, in which shear deformation is included.


Sign in / Sign up

Export Citation Format

Share Document