scholarly journals Generation of Multiple Pseudo Bessel Beams with Accurately Controllable Propagation Directions and High Efficiency Using a Reflective Metasurface

2020 ◽  
Vol 10 (20) ◽  
pp. 7219
Author(s):  
Haixia Liu ◽  
Hao Xue ◽  
Yongjie Liu ◽  
Long Li
Keyword(s):  
Electromagnetic Waves ◽  
High Efficiency ◽  
Superposition Principle ◽  
Bessel Beam ◽  
Large Angle ◽  
Propagation Distance ◽  
Wireless Power ◽  
Bessel Beams ◽  
Full Wave ◽  
Measurement Results

In this paper, a generation method procedure based on a reflective metasurface is proposed to generate multiple pseudo Bessel beams with accurately controllable propagation directions and high efficiency. Firstly, by adjusting the miniaturized unit cell of the reflective metasurface to modulate the electromagnetic waves using the proposed method, some off-axis pseudo Bessel beams with different propagation directions are generated. Then, by achieving the large-angle deflection and comparing the results with previous existing methods, the superiority of the proposed method is demonstrated. Based on the generated single off-axis pseudo Bessel beam and the superposition principle of the electromagnetic wave, a reflective metasurface with 47 × 47 elements is designed and fabricated at 10 GHz to generate dual pseudo Bessel beams. Full-wave simulation and experimental measurement results validate that the dual pseudo Bessel beams were generated successfully. The propagation directions of the dual pseudo Bessel beams can be controlled accurately by the reflective metasurface, and the efficiency of the beams is 59.2% at a propagation distance of 400 mm. The energy of the beams keeps concentrating along the propagation axes, which provides a new choice for wireless power transfer and wireless communication with one source to multiple receiving targets.

scholarly journals High-efficiency Bessel beam array generation by Huygens metasurfaces

Nanophotonics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 1079-1085 ◽  
Author(s):  
Zemeng Lin ◽  
Xiaowei Li ◽  
Ruizhe Zhao ◽  
Xu Song ◽  
Yongtian Wang ◽  
...  
Keyword(s):  
Optical Tweezers ◽  
High Efficiency ◽  
Bessel Beam ◽  
Numerical Aperture ◽  
Spatial Light Modulators ◽  
Total Efficiency ◽  
Self Healing ◽  
Bessel Beams ◽  
Beam Array ◽  
Low Efficiency

AbstractBessel beams have attracted considerable interest because of their unique non-diffractive, self-healing characteristics. Different approaches have been proposed to generate Bessel beams, such as using axicons, diffractive optical elements, composite holograms, or spatial light modulators. However, these approaches have suffered from limited numerical aperture, low efficiency, polarization-dependent properties, etc. Here, by utilizing dielectric Huygens metasurfaces as ultrathin, compact platforms by integrating the functionalities of Dammann gratings and axicons, we successfully demonstrate multiple Bessel beam generation with polarization-independent property. The number of two-dimensional arrays can be controlled flexibly, which can enhance information capacity with a total efficiency that can reach 66.36%. This method can have various applications, such as parallel laser fabrication, efficient optical tweezers, and optical communication.

scholarly journals Wireless power transfer system rigid to tissue characteristics using metamaterial inspired geometry for biomedical implant applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ramesh K. Pokharel ◽  
Adel Barakat ◽  
Shimaa Alshhawy ◽  
Kuniaki Yoshitomi ◽  
Costas Sarris
Keyword(s):  
Electromagnetic Waves ◽  
Wireless Power Transfer ◽  
Split Ring Resonator ◽  
Input Power ◽  
Power Transfer ◽  
Wireless Power ◽  
Biomedical Implant ◽  
Safety Regulations ◽  
Wireless Power Transfer System ◽  
Tissue Characteristics

AbstractConventional resonant inductive coupling wireless power transfer (WPT) systems encounter performance degradation while energizing biomedical implants. This degradation results from the dielectric and conductive characteristics of the tissue, which cause increased radiation and conduction losses, respectively. Moreover, the proximity of a resonator to the high permittivity tissue causes a change in its operating frequency if misalignment occurs. In this report, we propose a metamaterial inspired geometry with near-zero permeability property to overcome these mentioned problems. This metamaterial inspired geometry is stacked split ring resonator metamaterial fed by a driving inductive loop and acts as a WPT transmitter for an in-tissue implanted WPT receiver. The presented demonstrations have confirmed that the proposed metamaterial inspired WPT system outperforms the conventional one. Also, the resonance frequency of the proposed metamaterial inspired TX is negligibly affected by the tissue characteristics, which is of great interest from the design and operation prospects. Furthermore, the proposed WPT system can be used with more than twice the input power of the conventional one while complying with the safety regulations of electromagnetic waves exposure.

Theoretical Study on the Influence of Transmission Parameters on the Transmission Performance of Magnetic Resonance Wireless Power Transmission Systems

2014 ◽  
Vol 926-930 ◽  
pp. 434-439
Author(s):  
Chang Sheng Li ◽  
Juan Cao ◽  
He Zhang
Keyword(s):  
Magnetic Resonance ◽  
High Efficiency ◽  
Power Transmission ◽  
Maximum Efficiency ◽  
System Quality ◽  
Wireless Power ◽  
Transmission Performance ◽  
Wireless Power Transmission ◽  
Transmission Systems ◽  
Transmission Parameters

Magnetic resonance wireless power transmission technology is based on the phenomenon of resonant coupling to realize non-contact power transmission via near magnetic field. Based on the mutual coupling model of resonance system, the influence laws of system transmission parameters, such as coil coupling coefficients, load resistance, etc., on the transmission performance are theoretically studied in this paper. The research results shows that the power high-efficiency and high-quality transmission does not depend on the large coil loop coupling coefficient and the working frequencies of maximum power and maximum efficiency transmission do not coincide at most condition. Transmission systems with a high resonance frequency can produce high power and efficiency transmission over short distances. In addition, by increasing the coil diameter or wire diameter can improve the system quality factor, and optimize the energy transmission performance.

scholarly journals Design of a High-Power High-Efficiency Multi-Receiver Wireless Power Transfer System

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1308
Author(s):  
Yuyu Zhu ◽  
Hanyu Zhang ◽  
Zuming Wang ◽  
Xin Cao ◽  
Renyin Zhang
Keyword(s):  
Power Distribution ◽  
Power Flow ◽  
High Efficiency ◽  
Control Method ◽  
Experimental Models ◽  
Wireless Power ◽  
Multiple Receivers ◽  
Combined Operation ◽  
Wireless Power Transfer System ◽  
Good Agreement

This paper proposes a new control method to regulate the power flow into multiple receivers. This system consists of one transmitter controller and three receiver controllers. They work independently to decide the power distribution with their combined operation. The simulated and experimental models have been built, and the experimental results are in good agreement with the theoretical analysis results. The proposed method is robust, flexible, and generalizable, and can be employed under various wireless charging conditions.

A Design of a Wireless Power Receiving Unit With a High-Efficiency 6.78-MHz Active Rectifier Using Shared DLLs for Magnetic-Resonant A4 WP Applications

2016 ◽  
Vol 31 (6) ◽  
pp. 4484-4498 ◽  
Author(s):  
Hyung-Gu Park ◽  
Jae-Hyeong Jang ◽  
Hong-Jin Kim ◽  
Young-Jun Park ◽  
SeongJin Oh ◽  
...  
Keyword(s):  
High Efficiency ◽  
Wireless Power ◽  
Active Rectifier
Sign in / Sign up

Export Citation Format

Share Document