scholarly journals A Reproducible Method for Growing Biofilms on Polystyrene Surfaces: Biomass and Bacterial Viability Evolution of Pseudomonas fluorescens and Staphylococcus epidermidis

2020 ◽  
Vol 10 (13) ◽  
pp. 4544
Author(s):  
Valeria Angarano ◽  
Cindy Smet ◽  
Simen Akkermans ◽  
Theodora Akritidou ◽  
Bart Huyck ◽  
...  
Keyword(s):  
Pseudomonas Fluorescens ◽  
Staphylococcus Epidermidis ◽  
Laser Scanning ◽  
Growth Parameters ◽  
3D Structure ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Total Biomass ◽  
Final Population ◽  
Biofilm Development

Since biofilm development represents a crucial issue within industrial, clinical and domestic sectors, innovative technologies/approaches (e.g., light technology for inactivation, antibiofilm coatings) are required to eradicate them. In this multidisciplinary scenario, protocols for the development of biofilms are necessary, particularly, in laboratories (not specialised in biofilm science) lacking in sophisticated devices for their growth. A protocol was developed for growing Pseudomonas fluorescens (Gram-negative) biofilms on wide, flat, polystyrene surfaces within 24 h. Several factors, such as inoculum level, area size and growth medium concentration, were investigated. Biofilm development was studied via viable cells and biomass quantification. A comparative analysis between kinetics and growth parameters, estimated using the Baranyi and Roberts model, was conducted at different inoculum levels (104 and 107 CFU/mL). The inoculum levels did not influence the final population within the 24-h-grown biofilms, but they influenced the total biomass development, which followed different kinetics. Confocal laser scanning microscopy confirmed that overnight growth allowed for development of a densely packed biofilm with its 3D structure. The developed protocol was validated for Staphylococcus epidermidis (Gram-positive). The present work is the first study to develop an easy-to-use protocol to obtain highly reproducible biofilms, on flat polystyrene surfaces, with no need for sophisticated technologies.

scholarly journals The Protective Effect of Staphylococcus epidermidis Biofilm Matrix against Phage Predation

Viruses ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 1076
Author(s):  
Luís D. R. Melo ◽  
Graça Pinto ◽  
Fernando Oliveira ◽  
Diana Vilas-Boas ◽  
Carina Almeida ◽  
...  
Keyword(s):  
Protective Effect ◽  
Staphylococcus Epidermidis ◽  
Laser Scanning ◽  
3D Structure ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Planktonic Cells ◽  
The Matrix ◽  
The Impact ◽  
Biofilm Matrix

Staphylococcus epidermidis is a major causative agent of nosocomial infections, mainly associated with the use of indwelling devices, on which this bacterium forms structures known as biofilms. Due to biofilms’ high tolerance to antibiotics, virulent bacteriophages were previously tested as novel therapeutic agents. However, several staphylococcal bacteriophages were shown to be inefficient against biofilms. In this study, the previously characterized S. epidermidis-specific Sepunavirus phiIBB-SEP1 (SEP1), which has a broad spectrum and high activity against planktonic cells, was evaluated concerning its efficacy against S. epidermidis biofilms. The in vitro biofilm killing assays demonstrated a reduced activity of the phage. To understand the underlying factors impairing SEP1 inefficacy against biofilms, this phage was tested against distinct planktonic and biofilm-derived bacterial populations. Interestingly, SEP1 was able to lyse planktonic cells in different physiological states, suggesting that the inefficacy for biofilm control resulted from the biofilm 3D structure and the protective effect of the matrix. To assess the impact of the biofilm architecture on phage predation, SEP1 was tested in disrupted biofilms resulting in a 2 orders-of-magnitude reduction in the number of viable cells after 6 h of infection. The interaction between SEP1 and the biofilm matrix was further assessed by the addition of matrix to phage particles. Results showed that the matrix did not inactivate phages nor affected phage adsorption. Moreover, confocal laser scanning microscopy data demonstrated that phage infected cells were less predominant in the biofilm regions where the matrix was more abundant. Our results provide compelling evidence indicating that the biofilm matrix can work as a barrier, allowing the bacteria to be hindered from phage infection.

scholarly journals Importance of Initial Interfacial Steps during Chalcopyrite Bioleaching by a Thermoacidophilic Archaeon

2020 ◽  
Vol 8 (7) ◽  
pp. 1009
Author(s):  
Camila Safar ◽  
Camila Castro ◽  
Edgardo Donati
Keyword(s):  
High Temperatures ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Copper Recovery ◽  
Confocal Laser ◽  
Mineral Surface ◽  
Thermophilic Microorganisms ◽  
Valuable Metals ◽  
Refractory Mineral ◽  
Biofilm Development

Studies of thermophilic microorganisms have shown that they have a considerable biotechnological potential due to their optimum growth and metabolism at high temperatures. Thermophilic archaea have unique characteristics with important biotechnological applications; many of these species could be used in bioleaching processes to recover valuable metals from mineral ores. Particularly, bioleaching at high temperatures using thermoacidophilic microorganisms can greatly improve metal solubilization from refractory mineral species such as chalcopyrite (CuFeS2), one of the most abundant and widespread copper-bearing minerals. Interfacial processes such as early cell adhesion, biofilm development, and the formation of passive layers on the mineral surface play important roles in the initial steps of bioleaching processes. The present work focused on the investigation of different bioleaching conditions using the thermoacidophilic archaeon Acidianus copahuensis DSM 29038 to elucidate which steps are pivotal during the chalcopyrite bioleaching. Fluorescent in situ hybridization (FISH) and confocal laser scanning microscopy (CLSM) were used to visualize the microorganism–mineral interaction. Results showed that up to 85% of copper recovery from chalcopyrite could be achieved using A. copahuensis. Improvements in these yields are intimately related to an early contact between cells and the mineral surface. On the other hand, surface coverage by inactivated cells as well as precipitates significantly reduced copper recoveries.

scholarly journals Bacterial lipopolysaccharides variably modulate in vitro biofilm formation of Candida species

2010 ◽  
Vol 59 (10) ◽  
pp. 1225-1234 ◽  
Author(s):  
H. M. H. N. Bandara ◽  
O. L. T. Lam ◽  
R. M. Watt ◽  
L. J. Jin ◽  
L. P. Samaranayake
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Significant Inhibition ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dependent Manner ◽  
Bacterial Lipopolysaccharides ◽  
Species Specific ◽  
Biofilm Development

The objective of this study was to evaluate the effect of the bacterial endotoxin LPS on Candida biofilm formation in vitro. The effect of the LPS of Pseudomonas aeruginosa, Klebsiella pneumoniae, Serratia marcescens and Salmonella typhimurium on six different species of Candida, comprising Candida albicans ATCC 90028, Candida glabrata ATCC 90030, Candida krusei ATCC 6258, Candida tropicalis ATCC 13803, Candida parapsilosis ATCC 22019 and Candida dubliniensis MYA 646, was studied using a standard biofilm assay. The metabolic activity of in vitro Candida biofilms treated with LPS at 90 min, 24 h and 48 h was quantified by XTT reduction assay. Viable biofilm-forming cells were qualitatively analysed using confocal laser scanning microscopy (CLSM), while scanning electron microscopy (SEM) was employed to visualize the biofilm structure. Initially, adhesion of C. albicans was significantly stimulated by Pseudomonas and Klebsiella LPS. A significant inhibition of Candida adhesion was noted for the following combinations: C. glabrata with Pseudomonas LPS, C. tropicalis with Serratia LPS, and C. glabrata, C. parapsilosis or C. dubliniensis with Salmonella LPS (P<0.05). After 24 h of incubation, a significant stimulation of initial colonization was noted for the following combinations: C. albicans/C. glabrata with Klebsiella LPS, C. glabrata/C. tropicalis/C. krusei with Salmonella LPS. In contrast, a significant inhibition of biofilm formation was observed in C. glabrata/C. dubliniensis/C. krusei with Pseudomonas LPS, C. krusei with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. parapsilosis/C. dubliniensis /C. krusei with Salmonella LPS (P<0.05). On further incubation for 48 h, a significant enhancement of biofilm maturation was noted for the following combinations: C. glabrata/C. tropicalis with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. glabrata with Salmonella LPS, and a significant retardation was noted for C. parapsilosis/C. dubliniensis/C. krusei with Pseudomonas LPS, C. tropicalis with Serratia LPS, C. glabrata/C. parapsilosis/C. dubliniensis with Klebsiella LPS and C. dubliniensis with Salmonella LPS (P<0.05). These findings were confirmed by SEM and CLSM analyses. In general, the inhibition of the biofilm development of LPS-treated Candida spp. was accompanied by a scanty architecture with a reduced numbers of cells compared with the profuse and densely colonized control biofilms. These data are indicative that bacterial LPSs modulate in vitro Candida biofilm formation in a species-specific and time-dependent manner. The clinical and the biological relevance of these findings have yet to be explored.

Morphological and biochemical changes inPseudomonas fluorescensbiofilms induced by sub-inhibitory exposure to antimicrobial agents

2009 ◽  
Vol 55 (2) ◽  
pp. 163-178 ◽  
Author(s):  
James J. Dynes ◽  
John R. Lawrence ◽  
Darren R. Korber ◽  
George D.W. Swerhone ◽  
Gary G. Leppard ◽  
...  
Keyword(s):  
Antimicrobial Agent ◽  
Pseudomonas Fluorescens ◽  
Benzalkonium Chloride ◽  
Laser Scanning ◽  
Antimicrobial Agents ◽  
Membrane Integrity ◽  
Biochemical Changes ◽  
Laser Scanning Microscopy ◽  
Spectral Signature ◽  
Confocal Laser

Confocal laser scanning microscopy (CLSM) and scanning transmission X-ray microscopy (STXM) were used to examine the morphological and biochemical changes in Pseudomonas fluorescens biofilms grown in the presence of subinhibitory concentrations of 4 antimicrobial agents: triclosan, benzalkonium chloride, chlorhexidine dihydrochloride, and trisodium phosphate. CLSM analyses using the stains SYTO9 and propidium iodide indicated that the antimicrobial agents affected cell membrane integrity and cellular density to differing degrees. However, fluorescein diacetate assays and plate counts demonstrated that the cells remained metabolically active. Fluorescent lectin binding assays showed that changes in the arrangement and composition of the exopolymer matrix of the biofilms also occurred and that these changes depended on the antimicrobial agent. Detailed single cell analyses using STXM provided evidence that the cell morphology, and the spatial distribution and relative amounts of protein, lipids and polysaccharides in the biofilms and within the cells were different for each antimicrobial. The distribution of chlorhexidine in the biofilm, determined from its distinct spectral signature, was localized mainly inside the bacterial cells. Each antimicrobial agent elicited a unique response; P. fluorescens cells and biofilms changed their morphology and architecture, as well as the distribution and abundance of biomacromolecules, in particular the exopolymer matrix. Pseudomonas fluorescens also exhibited adaptation to benzalkonium chloride at 10 µg/mL. Our observations point to the importance of changes in the quantity and chemistry of the exopolymeric matrix in the response to antimicrobial agents and suggest their importance as targets for control.

scholarly journals Raman Spectroscopic Characterization of Endodontic Biofilm Matrices

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Tatiana Ramirez-Mora ◽  
Claudia Dávila-Pérez ◽  
Fernando Torres-Méndez ◽  
Grettel Valle-Bourrouet
Keyword(s):  
Raman Spectroscopy ◽  
Laser Scanning ◽  
Extracellular Polymeric Substances ◽  
Principal Component ◽  
Spectroscopic Characterization ◽  
Laser Scanning Microscopy ◽  
Confocal Scanning Laser Microscopy ◽  
Confocal Laser ◽  
Total Biomass ◽  
Endodontic Infections

Endodontic persistent infections are often mediated by bacterial biofilms. This mode of bacterial growth is characterized by the presence of a matrix mainly composed of extracellular polymeric substances (EPSs) that protect the encased microorganisms. To establish better control and disinfection protocols, elucidation of the main components of biofilm matrices present in endodontic infections is required. The aim of the present study was to characterize the principal components ofE. faecalis,A. naeslundii, and dual-species biofilm matrices by means of Raman spectroscopy and confocal scanning laser microscopy (CSLM) techniques. The total biomass of biofilms was quantified via crystal violet assays, and the monospecies biofilms showed higher biomass than the dual-species biofilms. Raman spectroscopy and confocal laser scanning microscopy were used to identify the biochemical composition and structure of the biofilm matrices. Spectra originating from the biofilms of two endodontic pathogens show the presence of carbohydrates, proteins, fatty acids, and nucleic acids in all samples; however, variation in the levels of expression of these biomolecules allows spectroscopic differentiation of the biofilms using principal component analysis. This study is the first attempt to identify the composition of monospecies and dual-species biofilms of endodontic origin. Our data provides an important approach to the understanding of molecular dynamics of endodontic infections.

scholarly journals Microbial Composition and Structure of Aerobic Granular Sewage Biofilms

2007 ◽  
Vol 73 (19) ◽  
pp. 6233-6240 ◽  
Author(s):  
S. D. Weber ◽  
W. Ludwig ◽  
K.-H. Schleifer ◽  
J. Fried
Keyword(s):  
Activated Sludge ◽  
Laser Scanning ◽  
Extracellular Polymeric Substances ◽  
Phase 1 ◽  
Simultaneous Detection ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microbial Composition ◽  
Granule Formation ◽  
Biofilm Development

ABSTRACT Aerobic activated sludge granules are dense, spherical biofilms which can strongly improve purification efficiency and sludge settling in wastewater treatment processes. In this study, the structure and development of different granule types were analyzed. Biofilm samples originated from lab-scale sequencing batch reactors which were operated with malthouse, brewery, and artificial wastewater. Scanning electron microscopy, light microscopy, and confocal laser scanning microscopy together with fluorescence in situ hybridization (FISH) allowed insights into the structure of these biofilms. Microscopic observation revealed that granules consist of bacteria, extracellular polymeric substances (EPS), protozoa and, in some cases, fungi. The biofilm development, starting from an activated sludge floc up to a mature granule, follows three phases. During phase 1, stalked ciliated protozoa of the subclass Peritrichia, e.g., Epistylis spp., settle on activated sludge flocs and build tree-like colonies. The stalks are subsequently colonized by bacteria. During phase 2, the ciliates become completely overgrown by bacteria and die. Thereby, the cellular remnants of ciliates act like a backbone for granule formation. During phase 3, smooth, compact granules are formed which serve as a new substratum for unstalked ciliate swarmers settling on granule surfaces. These mature granules comprise a dense core zone containing bacterial cells and EPS and a loosely structured fringe zone consisting of either ciliates and bacteria or fungi and bacteria. Since granules can grow to a size of up to several millimeters in diameter, we developed and applied a modified FISH protocol for the study of cryosectioned biofilms. This protocol allows the simultaneous detection of bacteria, ciliates, and fungi in and on granules.

Alginate production affects Pseudomonas aeruginosa biofilm development and architecture, but is not essential for biofilm formation

2004 ◽  
Vol 53 (7) ◽  
pp. 679-690 ◽  
Author(s):  
Andres Plata Stapper ◽  
Giri Narasimhan ◽  
Dennis E. Ohman ◽  
Johnny Barakat ◽  
Morten Hentzer ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Fluorescent Protein ◽  
Cell System ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Alginate Production ◽  
Green Fluorescent ◽  
Biofilm Development

Extracellular polymers can facilitate the non-specific attachment of bacteria to surfaces and hold together developing biofilms. This study was undertaken to qualitatively and quantitatively compare the architecture of biofilms produced by Pseudomonas aeruginosa strain PAO1 and its alginate-overproducing (mucA22) and alginate-defective (algD) variants in order to discern the role of alginate in biofilm formation. These strains, PAO1, Alg+ PAOmucA22 and Alg− PAOalgD, tagged with green fluorescent protein, were grown in a continuous flow cell system to characterize the developmental cycles of their biofilm formation using confocal laser scanning microscopy. Biofilm Image Processing (bip) and Community Statistics (comstat) software programs were used to provide quantitative measurements of the two-dimensional biofilm images. All three strains formed distinguishable biofilm architectures, indicating that the production of alginate is not critical for biofilm formation. Observation over a period of 5 days indicated a three-stage development pattern consisting of initiation, establishment and maturation. Furthermore, this study showed that phenotypically distinguishable biofilms can be quantitatively differentiated.

scholarly journals Multiple Roles of Biosurfactants in Structural Biofilm Development by Pseudomonas aeruginosa

2007 ◽  
Vol 189 (6) ◽  
pp. 2531-2539 ◽  
Author(s):  
Sünje Johanna Pamp ◽  
Tim Tolker-Nielsen
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Initial Phase ◽  
Laser Scanning ◽  
Multiple Roles ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Structural Development ◽  
Biofilm Development ◽  
Later Phase

ABSTRACT Recent studies have indicated that biosurfactants produced by Pseudomonas aeruginosa play a role both in maintaining channels between multicellular structures in biofilms and in dispersal of cells from biofilms. Through the use of flow cell technology and enhanced confocal laser scanning microscopy, we have obtained results which suggest that the biosurfactants produced by P. aeruginosa play additional roles in structural biofilm development. We present genetic evidence that during biofilm development by P. aeruginosa, biosurfactants promote microcolony formation in the initial phase and facilitate migration-dependent structural development in the later phase. P. aeruginosa rhlA mutants, deficient in synthesis of biosurfactants, were not capable of forming microcolonies in the initial phase of biofilm formation. Experiments involving two-color-coded mixed-strain biofilms showed that P. aeruginosa rhlA mutants were defective in migration-dependent development of mushroom-shaped multicellular structures in the later phase of biofilm formation. Experiments involving three-color-coded mixed-strain P. aeruginosa biofilms demonstrated that the wild-type and rhlA and pilA mutant strains formed distinct subpopulations on top of each other dependent on their ability to migrate and produce biosurfactants.

scholarly journals The Xanthomonas axonopodis pv. citri flagellum is required for mature biofilm and canker development

Microbiology ◽  
2011 ◽  
Vol 157 (3) ◽  
pp. 819-829 ◽  
Author(s):  
Florencia Malamud ◽  
Pablo S. Torres ◽  
Roxana Roeschlin ◽  
Luciano A. Rigano ◽  
Ramón Enrique ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Cell Signalling ◽  
Citrus Canker ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Slight Reduction ◽  
Xanthomonas Axonopodis ◽  
Abiotic Surfaces ◽  
Biofilm Development ◽  
Surface Translocation

Xanthomonas axonopodis pv. citri (Xac) is the causative agent of citrus canker. This bacterium develops a characteristic biofilm on both biotic and abiotic surfaces. To evaluate the participation of the single flagellum of Xac in biofilm formation, mutants in the fliC (flagellin) and the flgE (hook) genes were generated. Swimming motility, assessed on 0.25 % agar plates, was markedly reduced in fliC and flgE mutants. However, the fliC and flgE mutants exhibited a flagellar-independent surface translocation on 0.5 % agar plates. Mutation of either the rpfF or the rpfC gene, which both encode proteins involved in cell–cell signalling mediated by diffusible signal factor (DSF), led to a reduction in both flagellar-dependent and flagellar-independent surface translocation, indicating a regulatory role for DSF in both types of motility. Confocal laser scanning microscopy of biofilms produced in static culture demonstrated that the flagellum is also involved in the formation of mushroom-shaped structures and water channels, and in the dispersion of biofilms. The presence of the flagellum was required for mature biofilm development on lemon leaf surfaces. The absence of flagellin produced a slight reduction in Xac pathogenicity and this reduction was more severe when the complete flagellum structure was absent.

scholarly journals Effect of arsenite on swimming motility delays surface colonization in Herminiimonas arsenicoxydans

Microbiology ◽  
2010 ◽  
Vol 156 (8) ◽  
pp. 2336-2342 ◽  
Author(s):  
M. Marchal ◽  
R. Briandet ◽  
S. Koechler ◽  
B. Kammerer ◽  
P. N. Bertin
Keyword(s):  
Laser Scanning ◽  
Time Course ◽  
Wild Type Strain ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Wild Type ◽  
Arsenite Oxidase ◽  
Swimming Motility ◽  
In The Wild ◽  
Biofilm Development

Herminiimonas arsenicoxydans is a Gram-negative bacterium able to detoxify arsenic-contaminated environments by oxidizing arsenite [As(III)] to arsenate [As(V)] and by scavenging arsenic ions in an extracellular matrix. Its motility and colonization behaviour have been previously suggested to be influenced by arsenite. Using time-course confocal laser scanning microscopy, we investigated its biofilm development in the absence and presence of arsenite. Arsenite was shown to delay biofilm initiation in the wild-type strain; this was partly explained by its toxicity, which caused an increased growth lag time. However, this delayed adhesion step in the presence of arsenite was not observed in either a swimming motility defective fliL mutant or an arsenite oxidase defective aoxB mutant; both strains displayed the wild-type surface properties and growth capacities. We propose that during the biofilm formation process arsenite acts on swimming motility as a result of the arsenite oxidase activity, preventing the switch between planktonic and sessile lifestyles. Our study therefore highlights the existence, under arsenite exposure, of a competition between swimming motility, resulting from arsenite oxidation, and biofilm initiation.

Sign in / Sign up

Export Citation Format

Share Document