scholarly journals New Trends Towards Enhanced Structural Efficiency and Aesthetic Potential in Tall Buildings: The Case of Diagrids

2020 ◽  
Vol 10 (11) ◽  
pp. 3917 ◽  
Author(s):  
Domenico Scaramozzino ◽  
Giuseppe Lacidogna ◽  
Alberto Carpinteri
Keyword(s):  
Structural Response ◽  
Tall Buildings ◽  
Structural Systems ◽  
Preliminary Design ◽  
Shear Lag ◽  
Computational Tools ◽  
Remarkable Improvement ◽  
Geometrical Pattern ◽  
Dynamic Analyses ◽  
Architectural Effects

Due to the increasing number of people and activities within the cities, tall buildings are exploited worldwide to address the need for new living and commercial spaces, while limiting the amount of used land. In recent decades, the design of tall buildings has undergone a remarkable improvement, thanks to the development of new computational tools and technological solutions. This has led to the realization of innovative structural systems, like diagrids, which allow the achievement of high structural performances and remarkable architectural effects. In this paper, a thorough and updated review of diagrid structural systems is provided. Simplified methodologies for the preliminary design and structural analysis are reported. Special attention is also paid to the optimization of the structural response based on the geometrical pattern. A discussion of the effect of local deformability, stability and shear-lag phenomenon is carried out. Results from nonlinear and dynamic analyses for the seismic assessment of diagrid systems are reported, and attention is also paid to the recent research on diagrid nodes. Eventually, an overview of twisted, tapered, tilted and freeform diagrid towers is carried out, with a final mention of hexagrids, another recent evolution of tubular systems for tall buildings.

scholarly journals New Trends Towards Enhanced Structural Efficiency and Aesthetic Potential in Tall Buildings: The Case of Diagrids

2020 ◽  
Author(s):  
Domenico Scaramozzino ◽  
Alberto Carpinteri ◽  
Giuseppe Lacidogna
Keyword(s):  
Structural Response ◽  
Tall Buildings ◽  
Structural Systems ◽  
Preliminary Design ◽  
Shear Lag ◽  
Computational Tools ◽  
Remarkable Improvement ◽  
Geometrical Pattern ◽  
Dynamic Analyses ◽  
Architectural Effects

Due to the increasing number of people and activities within the cities, tall buildings are exploited worldwide to address the need for new living and commercial spaces, while limiting the amount of used land. In recent decades, the design of tall buildings has undergone a remarkable improvement, thanks to the development of new computational tools and technological solutions. This has led to the realization of innovative structural systems, like diagrids, which allow the achievement of high structural performances and remarkable architectural effects. In this contribution, a thorough and updated review of diagrid structural systems is provided. Simplified methodologies for the preliminary design and structural analysis are reported. Special attention is also paid to the optimization of the structural response based on the geometrical pattern. A discussion of the effect of local deformability, stability and shear-lag phenomenon is carried out. Results from nonlinear and dynamic analyses for the seismic assessment of diagrid systems are reported, and attention is also paid to the recent research on diagrid nodes. Eventually, an overview of twisted, tapered, tilted and freeform diagrid towers is carried out, with a final mention of hexagrids, another recent evolution of tubular systems for tall buildings.

scholarly journals Parametric Analysis of the Shear Lag Effect in Tube Structural Systems of Tall Buildings

2020 ◽  
Vol 11 (1) ◽  
pp. 278
Author(s):  
Ivan Hafner ◽  
Anđelko Vlašić ◽  
Tomislav Kišiček ◽  
Tvrtko Renić
Keyword(s):  
Parametric Analysis ◽  
Numerical Models ◽  
Tall Buildings ◽  
Structural Systems ◽  
Structural Elements ◽  
Structural System ◽  
Shear Lag ◽  
Shear Lag Effect ◽  
Lag Effect ◽  
Secondary Structural Elements

Horizontal loads such as earthquake and wind are considered dominant loads for the design of tall buildings. One of the most efficient structural systems in this regard is the tube structural system. Even though such systems have a high resistance when it comes to horizontal loads, the shear lag effect that is characterized by an incomplete and uneven activation of vertical elements may cause a series of problems such as the deformation of internal panels and secondary structural elements, which cumulatively grow with the height of the building. In this paper, the shear lag effect in a typical tube structure will be observed and analyzed on a series of different numerical models. A parametric analysis will be conducted with a great number of variations in the structural elements and building layout, for the purpose of giving recommendations for an optimal design of a tube structural system.

scholarly journals Shear-lag effect and its effect on the design of high-rise buildings

2018 ◽  
Vol 33 ◽  
pp. 02001 ◽  
Author(s):  
Bui Thanh Dat ◽  
Alexander Traykov ◽  
Marina Traykova
Keyword(s):  
Major Part ◽  
Tall Buildings ◽  
Lateral Load ◽  
Structural Systems ◽  
Lateral Loads ◽  
Shear Lag ◽  
Shear Lag Effect ◽  
Main Category ◽  
High Rise ◽  
Lag Effect

For super high-rise buildings, the analysis and selection of suitable structural solutions are very important. The structure has not only to carry the gravity loads (self-weight, live load, etc.), but also to resist lateral loads (wind and earthquake loads). As the buildings become taller, the demand on different structural systems dramatically increases. The article considers the division of the structural systems of tall buildings into two main categories - interior structures for which the major part of the lateral load resisting system is located within the interior of the building, and exterior structures for which the major part of the lateral load resisting system is located at the building perimeter. The basic types of each of the main structural categories are described. In particular, the framed tube structures, which belong to the second main category of exterior structures, seem to be very efficient. That type of structure system allows tall buildings resist the lateral loads. However, those tube systems are affected by shear lag effect - a nonlinear distribution of stresses across the sides of the section, which is commonly found in box girders under lateral loads. Based on a numerical example, some general conclusions for the influence of the shear-lag effect on frequencies, periods, distribution and variation of the magnitude of the internal forces in the structure are presented.

scholarly journals Structural Reliability Sensitivities under Nonstationary Random Vibrations

2013 ◽  
Vol 2013 ◽  
pp. 1-21 ◽  
Author(s):  
Rita Greco ◽  
Francesco Trentadue
Keyword(s):  
Structural Reliability ◽  
Structural Parameters ◽  
Time Integration ◽  
Structural Response ◽  
Integration Scheme ◽  
Structural Systems ◽  
Frame Building ◽  
Time Integration Scheme ◽  
Noise Input ◽  
The Time Domain

Response sensitivity evaluation is an important element in reliability evaluation and design optimization of structural systems. It has been widely studied under static and dynamic forcing conditions with deterministic input data. In this paper, structural response and reliability sensitivities are determined by means of the time domain covariance analysis in both classically and nonclassically damped linear structural systems. A time integration scheme is proposed for covariance sensitivity. A modulated, filtered, white noise input process is adopted to model the stochastic nonstationary loads. The method allows for the evaluation of sensitivity statistics of different quantities of dynamic response with respect to structural parameters. Finally, numerical examples are presented regarding a multistorey shear frame building.

scholarly journals Comparative Evaluation of Structural Systems for Tapered Tall Buildings

Buildings ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 108
Author(s):  
Kyoung Moon
Keyword(s):  
Structural Design ◽  
Comparative Evaluation ◽  
Building Materials ◽  
Tall Buildings ◽  
Structural Systems ◽  
Lateral Stiffness ◽  
Design Studies ◽  
Structural Efficiency ◽  
Aspect Ratios ◽  
Enormous Amount

Structural efficiency of tapered tall buildings has been well recognized, and many tall buildings of tapered forms have been built throughout the world. Tall buildings are built with an enormous amount of building materials. As one of the most efficient structural forms for tall buildings, the contribution of tapered forms to saving structural materials coming from our limited natural resources could be significant. Structural design of tall buildings is generally governed by lateral stiffness rather than strength. This paper systematically studies the structural efficiency of tapered tall buildings in terms of lateral stiffness. Tall buildings of various heights and angles of taper are designed with different structural systems prevalently used for today’s tall buildings, such as diagrids, braced tubes, and core-outrigger systems. The heights of the studied buildings range from 60 to 100 stories, and the corresponding height-to-width aspect ratios in their non-tapered prismatic forms range from 6.5 to 10.8. The angles of taper studied are 1, 2, and 3 degrees. Gross floor area of each building of the same story height is maintained to be the same regardless of the different angles of taper. Based on design studies, comparative evaluation of the various structural systems for tapered tall buildings is presented.

Generalised Beam Theory for composite beams with longitudinal and transverse partial interaction

2016 ◽  
Vol 22 (10) ◽  
pp. 2011-2039 ◽  
Author(s):  
Gerard Taig ◽  
Gianluca Ranzi
Keyword(s):  
Structural Response ◽  
Beam Theory ◽  
Element Model ◽  
Composite Beams ◽  
Cross Sectional ◽  
Shear Connections ◽  
Dynamic Analyses ◽  
Partial Interaction ◽  
Deformation Modes ◽  
Generalised Beam Theory

This paper presents a Generalised Beam Theory formulation to study the partial interaction behaviour of two-layered prismatic steel–concrete composite beams. The novelty of the proposed approach is in its capacity to handle the deformability of the shear connections at the interface between the slab and steel beam in both the longitudinal and transverse directions in the evaluation of the deformation modes. This method falls within a category of cross-sectional analyses available in the literature for which a suitable set of deformation modes, including conventional, extension and shear, is determined from dynamic analyses of discrete planar frame models representing the cross-section. In this context, the shear connections are modelled using shear deformable spring elements. As a result, the in-plane partial shear interaction behaviour is accounted for in the planar dynamic analysis during the evaluation of the conventional and extension modes, while the longitudinal partial interaction behaviour associated with the shear modes is included in the out-of-plane dynamic analyses. In the case of the conventional modes, the longitudinal slip is accounted for in the post-processing stage where the warping displacements are determined. A numerical example of a composite box girder beam is presented and its structural response investigated for different levels of shear connection stiffness in both the longitudinal and transverse directions. The accuracy of the numerical results is validated against those obtained with a shell finite element model implemented in ABAQUS/Standard software.

Sign in / Sign up

Export Citation Format

Share Document