scholarly journals The Use of Neural Networks in Combination with Evolutionary Algorithms to Optimise the Copper Flotation Enrichment Process

2020 ◽  
Vol 10 (9) ◽  
pp. 3119 ◽  
Author(s):  
Dariusz Jamróz ◽  
Tomasz Niedoba ◽  
Paulina Pięta ◽  
Agnieszka Surowiak
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Evolutionary Algorithms ◽  
Actual Process ◽  
Optimal Parameters ◽  
Flotation Process ◽  
Network Learning ◽  
The Neural Network ◽  
Enrichment Process ◽  
Copper Flotation

The paper presents a way of combining neural networks with evolutionary algorithms in order to find optimal parameters of the copper flotation enrichment process. The neural network was used in order to build a model describing the flotation process. The network learning was carried out with the use of samples from previous empirical measurements of the actual process. The model created in this way made it possible to find optimal parameters not only from among the measurement spaces, but also those that go beyond the measurements. Then, evolutionary algorithms were used in order to find optimal flotation parameters. The learned neural network previously described was used to calculate the criterion in the evolutionary algorithm.

scholarly journals Identification of Baikal phytoplankton inferred from computer vision methods and machine learning

2021 ◽  
pp. 1143-1146
Author(s):  
A.V. Lysenko ◽  
◽  
◽  
M.S. Oznobikhin ◽  
E.A. Kireev ◽  
...  
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Neural Networks ◽  
Computer Vision ◽  
Object Recognition ◽  
Light Microscope ◽  
Optimal Size ◽  
Optimal Parameters ◽  
The Neural Network

Abstract. This study discusses the problem of phytoplankton classification using computer vision methods and convolutional neural networks. We created a system for automatic object recognition consisting of two parts: analysis and primary processing of phytoplankton images and development of the neural network based on the obtained information about the images. We developed software that can detect particular objects in images from a light microscope. We trained a convolutional neural network in transfer learning and determined optimal parameters of this neural network and the optimal size of using dataset. To increase accuracy for these groups of classes, we created three neural networks with the same structure. The obtained accuracy in the classification of Baikal phytoplankton by these neural networks was up to 80%.

scholarly journals Robot Manipulators Control with Guaranteed Stability Using Feedback Error Learning Neural Networks

1996 ◽  
Vol 8 (4) ◽  
pp. 383-391
Author(s):  
Ju-Jang Lee ◽  
◽  
Sung-Woo Kim ◽  
Kang-Bark Park
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Learning Rule ◽  
Neural Network Learning ◽  
Network Learning ◽  
The Neural Network ◽  
Control Schemes ◽  
Feedback Error Learning ◽  
Feedback Error ◽  
Error Learning

Among various neural network learning control schemes, feedback error learning(FEL)8),9) has been known that it has advantages over other schemes. However, such advantages are founded on the assumption that the systems is linearly parameterized and stable. Thus, FEL has difficulties in coping with uncertain and unstable systems. Furthermore, it is not clear how the learning rule of FEL is obtained in the minimization sense. Therefore, to overcome such problems, we propose neural network control schemes using FEL with guaranteed performance. The proposed strategy is to use multi-layer neural networks, to design a stabilityguaranteeing controller(SGC), and to derive a learning rule to obtain the tracking performance. Using multilayer neural networks we can fully utilize the learning capability no matter how the system is linearly parameterized or not. The SGC makes it possible for the neural network to learn without fear of instability. As a result, the more the neural network learning proceeds, the better the tracking performance becomes.

scholarly journals Application of a Neural Network for the Analysis of the “Soyuz” Launch Vehicle Boosters’ Separation.

2020 ◽  
pp. 42-56
Author(s):  
M.M. Matushin ◽  
D.A. Makhalov
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Back Propagation ◽  
Automated Analysis ◽  
General Information ◽  
Network Configuration ◽  
Neural Network Learning ◽  
Network Learning ◽  
The Neural Network ◽  
Trained Neural Network

The paper discusses application of artificial intelligence (neural networks) technologies for automated analysis of dynamic processes of the “Soyuz” launch vehicle’s onboard systems. Cyclogram of strap-on boosters separa-tion as applied to this task, and telemetry measurement used to monitor this process are described. The general information about the construction of the used types of neural networks and about their learning using a back-propagation method is presented; the neural network configuration for solving the mentioned task, telemetry presentation format suitable for sup-plying power for the neural network, and features of the neural network learning are proposed. The approbation of the trained neural network for the analysis of launches of the “Soyuz-FG” and “Soyuz-2.1a” launch vehi-cles using telemetry in real-time and delayed modes was carried out.

SCORING MODELING BASED ON NEURAL NETWORKS FOR DETERMINING A BANK BORROWER'S RATING

2020 ◽  
Vol 2020 (10) ◽  
pp. 54-62
Author(s):  
Oleksii VASYLIEV ◽  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Network Architecture ◽  
Statistical Data ◽  
Activation Function ◽  
Decision Making Process ◽  
Neural Network Architecture ◽  
Acceptable Accuracy ◽  
The Neural Network ◽  
Sigmoid Activation Function

The problem of applying neural networks to calculate ratings used in banking in the decision-making process on granting or not granting loans to borrowers is considered. The task is to determine the rating function of the borrower based on a set of statistical data on the effectiveness of loans provided by the bank. When constructing a regression model to calculate the rating function, it is necessary to know its general form. If so, the task is to calculate the parameters that are included in the expression for the rating function. In contrast to this approach, in the case of using neural networks, there is no need to specify the general form for the rating function. Instead, certain neural network architecture is chosen and parameters are calculated for it on the basis of statistical data. Importantly, the same neural network architecture can be used to process different sets of statistical data. The disadvantages of using neural networks include the need to calculate a large number of parameters. There is also no universal algorithm that would determine the optimal neural network architecture. As an example of the use of neural networks to determine the borrower's rating, a model system is considered, in which the borrower's rating is determined by a known non-analytical rating function. A neural network with two inner layers, which contain, respectively, three and two neurons and have a sigmoid activation function, is used for modeling. It is shown that the use of the neural network allows restoring the borrower's rating function with quite acceptable accuracy.

scholarly journals Discretization and machine learning approximation of BSDEs with a constraint on the Gains-process

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Idris Kharroubi ◽  
Thomas Lim ◽  
Xavier Warin
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Neural Networks ◽  
Differential Equations ◽  
Numerical Experiments ◽  
Optimization Problem ◽  
Learning Approach ◽  
The Neural Network ◽  
Machine Learning Approach ◽  
Mesh Grid

AbstractWe study the approximation of backward stochastic differential equations (BSDEs for short) with a constraint on the gains process. We first discretize the constraint by applying a so-called facelift operator at times of a grid. We show that this discretely constrained BSDE converges to the continuously constrained one as the mesh grid converges to zero. We then focus on the approximation of the discretely constrained BSDE. For that we adopt a machine learning approach. We show that the facelift can be approximated by an optimization problem over a class of neural networks under constraints on the neural network and its derivative. We then derive an algorithm converging to the discretely constrained BSDE as the number of neurons goes to infinity. We end by numerical experiments.

Application of neural networks in predictions of brake wear particulate matter emission

2021 ◽  
pp. 095440702110363
Author(s):  
Saša Vasiljević ◽  
Jasna Glišović ◽  
Nadica Stojanović ◽  
Ivan Grujić
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Particulate Matter ◽  
Traffic Control ◽  
World Health ◽  
Vehicle Speed ◽  
System Pressure ◽  
The Neural Network ◽  
Vehicle Systems ◽  
Brake Wear

According to the World Health Organization, air pollution with PM10 and PM2.5 (PM-particulate matter) is a significant problem that can have serious consequences for human health. Vehicles, as one of the main sources of PM10 and PM2.5 emissions, pollute the air and the environment both by creating particles by burning fuel in the engine, and by wearing of various elements in some vehicle systems. In this paper, the authors conducted the prediction of the formation of PM10 and PM2.5 particles generated by the wear of the braking system using a neural network (Artificial Neural Networks (ANN)). In this case, the neural network model was created based on the generated particles that were measured experimentally, while the validity of the created neural network was checked by means of a comparative analysis of the experimentally measured amount of particles and the prediction results. The experimental results were obtained by testing on an inertial braking dynamometer, where braking was performed in several modes, that is under different braking parameters (simulated vehicle speed, brake system pressure, temperature, braking time, braking torque). During braking, the concentration of PM10 and PM2.5 particles was measured simultaneously. The total of 196 measurements were performed and these data were used for training, validation, and verification of the neural network. When it comes to simulation, a comparison of two types of neural networks was performed with one output and with two outputs. For each type, network training was conducted using three different algorithms of backpropagation methods. For each neural network, a comparison of the obtained experimental and simulation results was performed. More accurate prediction results were obtained by the single-output neural network for both particulate sizes, while the smallest error was found in the case of a trained neural network using the Levenberg-Marquardt backward propagation algorithm. The aim of creating such a prediction model is to prove that by using neural networks it is possible to predict the emission of particles generated by brake wear, which can be further used for modern traffic systems such as traffic control. In addition, this wear algorithm could be applied on other vehicle systems, such as a clutch or tires.

scholarly journals A Neural Network Decomposition Algorithm for Mapping on Crossbar-Based Computing Systems

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1526 ◽  
Author(s):  
Choongmin Kim ◽  
Jacob A. Abraham ◽  
Woochul Kang ◽  
Jaeyong Chung
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Predictive Performance ◽  
Fixed Number ◽  
Decomposition Algorithm ◽  
Computing Systems ◽  
Network Decomposition ◽  
Von Neumann ◽  
Analog Computing ◽  
The Neural Network

Crossbar-based neuromorphic computing to accelerate neural networks is a popular alternative to conventional von Neumann computing systems. It is also referred as processing-in-memory and in-situ analog computing. The crossbars have a fixed number of synapses per neuron and it is necessary to decompose neurons to map networks onto the crossbars. This paper proposes the k-spare decomposition algorithm that can trade off the predictive performance against the neuron usage during the mapping. The proposed algorithm performs a two-level hierarchical decomposition. In the first global decomposition, it decomposes the neural network such that each crossbar has k spare neurons. These neurons are used to improve the accuracy of the partially mapped network in the subsequent local decomposition. Our experimental results using modern convolutional neural networks show that the proposed method can improve the accuracy substantially within about 10% extra neurons.

Classification of Alloys with an Artificial Neural Network and Multivariate Calibration of Glow-Discharge Emission Spectra

1991 ◽  
Vol 45 (10) ◽  
pp. 1706-1716 ◽  
Author(s):  
Mark Glick ◽  
Gary M. Hieftje
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Glow Discharge ◽  
Multivariate Calibration ◽  
Emission Spectra ◽  
K Nearest Neighbor ◽  
The Neural Network ◽  
Calibration Sets ◽  
Artificial Neural

Artificial neural networks were constructed for the classification of metal alloys based on their elemental constituents. Glow discharge-atomic emission spectra obtained with a photodiode array spectrometer were used in multivariate calibrations for 7 elements in 37 Ni-based alloys (different types) and 15 Fe-based alloys. Subsets of the two major classes formed calibration sets for stepwise multiple linear regression. The remaining samples were used to validate the calibration models. Reference data from the calibration sets were then pooled into a single set to train neural networks with different architectures and different training parameters. After the neural networks learned to discriminate correctly among alloy classes in the training set, their ability to classify samples in the testing set was measured. In general, the neural network approach performed slightly better than the K-nearest neighbor method, but it suffered from a hidden classification mechanism and nonunique solutions. The neural network methodology is discussed and compared with conventional sample-classification techniques, and multivariate calibration of glow discharge spectra is compared with conventional univariate calibration.

scholarly journals Application of artificial neural networks to predict the deflections of reinforced concrete beams

2016 ◽  
Vol 38 (2) ◽  
pp. 37-46 ◽  
Author(s):  
Mateusz Kaczmarek ◽  
Agnieszka Szymańska
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
The Neural Network ◽  
Eurocode 2 ◽  
Artificial Neural ◽  
Concrete Elements

Abstract Nonlinear structural mechanics should be taken into account in the practical design of reinforced concrete structures. Cracking is one of the major sources of nonlinearity. Description of deflection of reinforced concrete elements is a computational problem, mainly because of the difficulties in modelling the nonlinear stress-strain relationship of concrete and steel. In design practise, in accordance with technical rules (e.g., Eurocode 2), a simplified approach for reinforced concrete is used, but the results of simplified calculations differ from the results of experimental studies. Artificial neural network is a versatile modelling tool capable of making predictions of values that are difficult to obtain in numerical analysis. This paper describes the creation and operation of a neural network for making predictions of deflections of reinforced concrete beams at different load levels. In order to obtain a database of results, that is necessary for training and testing the neural network, a research on measurement of deflections in reinforced concrete beams was conducted by the authors in the Certified Research Laboratory of the Building Engineering Institute at Wrocław University of Science and Technology. The use of artificial neural networks is an innovation and an alternative to traditional methods of solving the problem of calculating the deflections of reinforced concrete elements. The results show the effectiveness of using artificial neural network for predicting the deflection of reinforced concrete beams, compared with the results of calculations conducted in accordance with Eurocode 2. The neural network model presented in this paper can acquire new data and be used for further analysis, with availability of more research results.

scholarly journals Artificial neural networks applied for soil class prediction in mountainous landscape of the Serra do Mar¹

2014 ◽  
Vol 38 (6) ◽  
pp. 1681-1693 ◽  
Author(s):  
Braz Calderano Filho ◽  
Helena Polivanov ◽  
César da Silva Chagas ◽  
Waldir de Carvalho Júnior ◽  
Emílio Velloso Barroso ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Kappa Index ◽  
Class Prediction ◽  
Soil Class ◽  
Serra Do Mar ◽  
The Neural Network ◽  
Artificial Neural ◽  
Local Geology

Soil information is needed for managing the agricultural environment. The aim of this study was to apply artificial neural networks (ANNs) for the prediction of soil classes using orbital remote sensing products, terrain attributes derived from a digital elevation model and local geology information as data sources. This approach to digital soil mapping was evaluated in an area with a high degree of lithologic diversity in the Serra do Mar. The neural network simulator used in this study was JavaNNS and the backpropagation learning algorithm. For soil class prediction, different combinations of the selected discriminant variables were tested: elevation, declivity, aspect, curvature, curvature plan, curvature profile, topographic index, solar radiation, LS topographic factor, local geology information, and clay mineral indices, iron oxides and the normalized difference vegetation index (NDVI) derived from an image of a Landsat-7 Enhanced Thematic Mapper Plus (ETM+) sensor. With the tested sets, best results were obtained when all discriminant variables were associated with geological information (overall accuracy 93.2 - 95.6 %, Kappa index 0.924 - 0.951, for set 13). Excluding the variable profile curvature (set 12), overall accuracy ranged from 93.9 to 95.4 % and the Kappa index from 0.932 to 0.948. The maps based on the neural network classifier were consistent and similar to conventional soil maps drawn for the study area, although with more spatial details. The results show the potential of ANNs for soil class prediction in mountainous areas with lithological diversity.

Sign in / Sign up

Export Citation Format

Share Document