scholarly journals Open-Circuit Fault Diagnosis of Wind Power Converter Using Variational Mode Decomposition, Trend Feature Analysis and Deep Belief Network

2020 ◽  
Vol 10 (6) ◽  
pp. 2146 ◽  
Author(s):  
Jingxuan Zhang ◽  
Hexu Sun ◽  
Zexian Sun ◽  
Yan Dong ◽  
Weichao Dong
Keyword(s):  
Fault Diagnosis ◽  
Wind Turbine ◽  
Power Converter ◽  
Open Circuit ◽  
Original Signal ◽  
Variational Mode Decomposition ◽  
Mode Decomposition ◽  
Igbt Modules ◽  
Igbt Module ◽  
Circuit Fault Diagnosis

The power converter is a significant device in a wind power system. The wind turbine will be shut down and off grid immediately with the occurrence of the insulated gate bipolar transistor (IGBT) module open-circuit fault of the power converter, which will seriously impact the stability of grid and even threaten personal safety. However, in the existing diagnosis strategies for the power converter there are few single and double IGBT module open-circuit fault diagnosis methods producing negative results, including erroneous judgment, omissive judgment and low accuracy. In this paper, a novel method to diagnose the single and double IGBT modules open-circuit faults of the permanent magnet synchronous generator (PMSG) wind turbine grid-side converter (GSC) is proposed: Primarily, by collecting the three-phase current varying with a wind speed of 22 states, including a normal state and 21 failure states of PMSG wind turbine GSC as the original signal data. Afterward, the original signal data are decomposed by using variational mode decomposition (VMD) to obtain the mode coefficient series, which are analyzed by the proposed method base on fault trend feature for extracting the trend feature vectors. Finally, the trend feature vectors are utilized as the input of the deep belief network (DBN) for decision-making and obtaining the classification results. The simulation and experimental results show that the proposed method can diagnose the single and double IGBT modules open-circuit faults of GSC, and the accuracy is higher than the benchmark models.

scholarly journals Open-Circuit Fault Diagnosis of Wind Power Converter Using Variational Mode Decomposition, Trend Feature Analysis and Deep Belief Network

2020 ◽  
Author(s):  
Jingxuan Zhang ◽  
Hexu Sun ◽  
Zexian Sun ◽  
Yan Dong ◽  
Weichao Dong
Keyword(s):  
Fault Diagnosis ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Converter ◽  
Open Circuit ◽  
Original Signal ◽  
Variational Mode Decomposition ◽  
Mode Decomposition ◽  
Igbt Modules ◽  
Circuit Fault Diagnosis

The power converter is the significant device in a wind power system. Wind turbine will be shut down and off grid immediately with the occurrence of the IGBT module open-circuit fault of power converter, which will seriously impact the stability of grid and even threaten personal safety. However, in the existing diagnosis strategies of power converter, there are few single and double IGBT modules open-circuit fault diagnosis methods producing negative results including erroneous judgment, omissive judgment and low accuracy. In this paper, a novel method to diagnose the single and double IGBT modules open-circuit faults of the permanent magnet synchronous generator (PMSG) wind turbine grid-side converter (GSC) is proposed. Above all, collecting the three-phase current varying with wind speed of 22 failure states including a normal state of PMSG wind turbine GSC as the original signal data. Afterward, the original signal data are decomposed by using variational mode decomposition (VMD) to obtain the mode coefficient series, which are analyzed by the proposed method base on fault trend feature for extracting the trend feature vectors. Finally, the trend feature vectors are used as the input of deep belief network (DBN) for decision-making and obtaining the classification results. The simulation and experimental results show that the proposed method can diagnose the single and double IGBT modules open-circuit faults of GSC, and the accuracy is higher than the benchmark models.

scholarly journals Research on Fault Diagnosis of Gearbox with Improved Variational Mode Decomposition

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3510 ◽  
Author(s):  
Zhijian Wang ◽  
Junyuan Wang ◽  
Wenhua Du
Keyword(s):  
Fault Diagnosis ◽  
Signal To Noise Ratio ◽  
Optimal Number ◽  
Original Signal ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Multiple Fault ◽  
Mode Decomposition ◽  
Fault Features ◽  
Reconstructed Signal

Variational Mode Decomposition (VMD) can decompose signals into multiple intrinsic mode functions (IMFs). In recent years, VMD has been widely used in fault diagnosis. However, it requires a preset number of decomposition layers K and is sensitive to background noise. Therefore, in order to determine K adaptively, Permutation Entroy Optimization (PEO) is proposed in this paper. This algorithm can adaptively determine the optimal number of decomposition layers K according to the characteristics of the signal to be decomposed. At the same time, in order to solve the sensitivity of VMD to noise, this paper proposes a Modified VMD (MVMD) based on the idea of Noise Aided Data Analysis (NADA). The algorithm first adds the positive and negative white noise to the original signal, and then uses the VMD to decompose it. After repeated cycles, the noise in the original signal will be offset to each other. Then each layer of IMF is integrated with each layer, and the signal is reconstructed according to the results of the integrated mean. MVMD is used for the final decomposition of the reconstructed signal. The algorithm is used to deal with the simulation signals and measured signals of gearbox with multiple fault characteristics. Compared with the decomposition results of EEMD and VMD, it shows that the algorithm can not only improve the signal to noise ratio (SNR) of the signal effectively, but can also extract the multiple fault features of the gear box in the strong noise environment. The effectiveness of this method is verified.

Application of variational mode decomposition energy distribution to bearing fault diagnosis in a wind turbine

2016 ◽  
Vol 39 (7) ◽  
pp. 1000-1006 ◽  
Author(s):  
Xueli An ◽  
Yongjun Tang
Keyword(s):  
Fault Diagnosis ◽  
Energy Distribution ◽  
Wind Turbine ◽  
Roller Bearing ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Variational Mode Decomposition ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis ◽  
Mode Decomposition

For the unsteady characteristics of a fault vibration signal of a wind turbine’s rolling bearing, a bearing fault diagnosis method based on variational mode decomposition of the energy distribution is proposed. Firstly, variational mode decomposition is used to decompose the original vibration signal into a finite number of stationary components. Then, some components which comprise the major fault information are selected for further analysis. When a rolling bearing fault occurs, the energy in different frequency bands of the vibration acceleration signals will change. Energy characteristic parameters can then be extracted from each component as the input parameters of the classifier, based on the K nearest neighbour algorithm. This can identify the type of fault in the rolling bearing. The vibration signals from a spherical roller bearing in its normal state, with an outer race fault, with an inner race fault and with a roller fault were analyzed. The results showed that the proposed method (variational mode decomposition is used as a pre-processor to extract the energy of each frequency band as the characteristic parameter) can identify the working state and fault type of rolling bearings in a wind turbine.

Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications

2013 ◽  
Vol 60 (9) ◽  
pp. 3957-3967 ◽  
Author(s):  
Nuno M. A. Freire ◽  
Jorge O. Estima ◽  
Antonio J. Marques Cardoso
Keyword(s):  
Fault Diagnosis ◽  
Wind Turbine ◽  
Open Circuit ◽  
Circuit Fault Diagnosis

Bearing fault diagnosis of a wind turbine based on variational mode decomposition and permutation entropy

2017 ◽  
Vol 231 (2) ◽  
pp. 200-206 ◽  
Author(s):  
Xueli An ◽  
Luoping Pan
Keyword(s):  
Fault Diagnosis ◽  
Wind Turbine ◽  
Nearest Neighbor ◽  
Roller Bearing ◽  
Permutation Entropy ◽  
Variational Mode Decomposition ◽  
Vibration Signals ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis ◽  
Mode Decomposition

Variational mode decomposition is a new signal decomposition method, which can process non-linear and non-stationary signals. It can overcome the problems of mode mixing and compensate for the shortcomings in empirical mode decomposition. Permutation entropy is a method which can detect the randomness and kinetic mutation behavior of a time series. It can be considered for use in fault diagnosis. The complexity of wind power generation systems means that the randomness and kinetic mutation behavior of their vibration signals are displayed at different scales. Multi-scale permutation entropy analysis is therefore needed for such vibration signals. This research investigated a method based on variational mode decomposition and permutation entropy for the fault diagnosis of a wind turbine roller bearing. Variational mode decomposition was adopted to decompose the bearing vibration signal into its constituent components. The components containing key fault information were selected for the extraction of their permutation entropy. This entropy was used as a bearing fault characteristic value. The nearest neighbor algorithm was employed as a classifier to identify faults in a roller bearing. The experimental data showed that the proposed method can be applied to wind turbine roller bearing fault diagnosis.

Sign in / Sign up

Export Citation Format

Share Document