scholarly journals Comparison of Prediction Methods for Axial Strength of Grouted Connections with Shear Keys

2020 ◽  
Vol 10 (6) ◽  
pp. 1942
Author(s):  
You Xianhui ◽  
Wu Zhaoqi ◽  
Chen Zehao
Keyword(s):  
Health And Safety ◽  
Prediction Method ◽  
American Petroleum Institute ◽  
Experimental Results ◽  
Offshore Wind ◽  
Prediction Methods ◽  
Compression Tests ◽  
Axial Strength ◽  
Wide Range ◽  
Shear Keys

Grouted connections are commonly used in marine engineering, especially on oil platforms, cross-sea bridges, and offshore wind power turbines. The prediction methods for axial carrying capacity of grouted connections with shear keys and their application ranges in current codes were analyzed in this paper. The calculated results by using different codes were compared based on a practical grouted connection between steel piles and the jacket foundation of a wind turbine. The research team conducted axial compression tests on seven specimens, collected a wide range of experimental results to establish a database, and finally compared the standard calculation results with the experimental results. The study indicates that the axial strength of grouted connections predicted by different methods is distinct. The calculation formula of the British Health and Safety Executive (HSE, 2002) has obvious limitations; specifically, with increased shear keys, strength is overestimated, resulting in insecure design outcome of structures. The results calculated by the Norwegian Det Norske Veritas (DNV, 2013) are generally consistent with the experimental results, in which the reduction effect of multiple shear keys was considered. The prediction method of the American Petroleum Institute (API, 2007), which undervalues the bearing performance of connections, is excessively conservative. The method of the combined Norwegian and German Det Norske Veritas–Germanischer Lloyd (DNV-GL, 2016) has wider applicability and is safe, reliable, and economical.

scholarly journals User-Personalized Review Rating Prediction Method Based on Review Text Content and User-Item Rating Matrix

Information ◽  
2018 ◽  
Vol 10 (1) ◽  
pp. 1 ◽  
Author(s):  
Bingkun Wang ◽  
Bing Chen ◽  
Li Ma ◽  
Gaiyun Zhou
Keyword(s):  
State Of The Art ◽  
Prediction Method ◽  
Research Topic ◽  
Prediction Methods ◽  
Product Reviews ◽  
Important Research ◽  
Important Research Topic ◽  
Wide Range ◽  
Rating Prediction ◽  
Text Content

With the explosive growth of product reviews, review rating prediction has become an important research topic which has a wide range of applications. The existing review rating prediction methods use a unified model to perform rating prediction on reviews published by different users, ignoring the differences of users within these reviews. Constructing a separate personalized model for each user to capture the user’s personalized sentiment expression is an effective attempt to improve the performance of the review rating prediction. The user-personalized sentiment information can be obtained not only by the review text but also by the user-item rating matrix. Therefore, we propose a user-personalized review rating prediction method by integrating the review text and user-item rating matrix information. In our approach, each user has a personalized review rating prediction model, which is decomposed into two components, one part is based on review text and the other is based on user-item rating matrix. Through extensive experiments on Yelp and Douban datasets, we validate that our methods can significantly outperform the state-of-the-art methods.

On the nominal transverse shear strain to characterize the severity of creasing

TAPPI Journal ◽  
2018 ◽  
Vol 17 (04) ◽  
pp. 231-240
Author(s):  
Douglas Coffin ◽  
Joel Panek
Keyword(s):  
Shear Strain ◽  
Transverse Shear ◽  
Elastic Limit ◽  
Experimental Results ◽  
Transverse Shear Strain ◽  
Maximum Strain ◽  
Machine Direction ◽  
Engineering Approach ◽  
Wide Range ◽  
Analytic Expression

A transverse shear strain was utilized to characterize the severity of creasing for a wide range of tooling configurations. An analytic expression of transverse shear strain, which accounts for tooling geometry, correlated well with relative crease strength and springback as determined from 90° fold tests. The experimental results show a minimum strain (elastic limit) that needs to be exceeded for the relative crease strength to be reduced. The theory predicts a maximum achievable transverse shear strain, which is further limited if the tooling clearance is negative. The elastic limit and maximum strain thus describe the range of interest for effective creasing. In this range, cross direction (CD)-creased samples were more sensitive to creasing than machine direction (MD)-creased samples, but the differences were reduced as the shear strain approached the maximum. The presented development provides the foundation for a quantitative engineering approach to creasing and folding operations.

Occupational and Environmental Health

2017 ◽  
Keyword(s):  
Public Health ◽  
Occupational Health ◽  
Environmental Health ◽  
Health And Safety ◽  
Practical Experience ◽  
Global Perspective ◽  
Clear Understanding ◽  
Practical Case ◽  
Environmental Sciences ◽  
Wide Range

This thoroughly updated seventh edition is a comprehensive, clearly written, and practical textbook that includes information on both occupational health and environmental health, providing the necessary foundation for recognizing and preventing work-related and environmentally induced diseases and injuries. National and international experts share their knowledge and practical experience in addressing a wide range of issues and evolving challenges in their fields. A multidisciplinary approach makes this an ideal textbook for students and practitioners in public health, occupational and environmental medicine, occupational health nursing, epidemiology, toxicology, occupational and environmental hygiene, safety, ergonomics, environmental sciences, and other fields. Comprehensive coverage provides a clear understanding of occupational and environmental health and its relationships to public health, environmental sciences, and government policy. Practical case studies demonstrate how to apply the basic principles of occupational and environmental health to real-world challenges. Numerous tables, graphs, and photographs reinforce key concepts. Annotated Further Reading sections at the end of chapters provide avenues for obtaining further infomation. This new edition of the book is thoroughly updated and also contains new chapters on climate change, children’s environmental health, liver disorders, kidney disorders, and a global perspective on occupational health and safety.

scholarly journals Numerical Phase-Field Model Validation for Dissolution of Minerals

2021 ◽  
Vol 11 (6) ◽  
pp. 2464
Author(s):  
Sha Yang ◽  
Neven Ukrainczyk ◽  
Antonio Caggiano ◽  
Eddie Koenders
Keyword(s):  
Phase Field ◽  
Liquid Interface ◽  
Mineral Dissolution ◽  
Experimental Results ◽  
Wide Range ◽  
Congruent Dissolution ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Dissolution Of Minerals ◽  
Meso Scale

Modelling of a mineral dissolution front propagation is of interest in a wide range of scientific and engineering fields. The dissolution of minerals often involves complex physico-chemical processes at the solid–liquid interface (at nano-scale), which at the micro-to-meso-scale can be simplified to the problem of continuously moving boundaries. In this work, we studied the diffusion-controlled congruent dissolution of minerals from a meso-scale phase transition perspective. The dynamic evolution of the solid–liquid interface, during the dissolution process, is numerically simulated by employing the Finite Element Method (FEM) and using the phase–field (PF) approach, the latter implemented in the open-source Multiphysics Object Oriented Simulation Environment (MOOSE). The parameterization of the PF numerical approach is discussed in detail and validated against the experimental results for a congruent dissolution case of NaCl (taken from literature) as well as on analytical models for simple geometries. In addition, the effect of the shape of a dissolving mineral particle was analysed, thus demonstrating that the PF approach is suitable for simulating the mesoscopic morphological evolution of arbitrary geometries. Finally, the comparison of the PF method with experimental results demonstrated the importance of the dissolution rate mechanisms, which can be controlled by the interface reaction rate or by the diffusive transport mechanism.

scholarly journals Analysis of the Influencing Factors of FDM-Supported Positions for the Compressive Strength of Printing Components

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4008
Author(s):  
Zhengkai Feng ◽  
Heng Wang ◽  
Chuanjiang Wang ◽  
Xiujuan Sun ◽  
Shuai Zhang
Keyword(s):  
Compressive Strength ◽  
Stress Intensity ◽  
Influencing Factors ◽  
Fused Deposition Modeling ◽  
Experimental Results ◽  
Compression Tests ◽  
Suspended State ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Reference Experiment

Fused deposition modeling (FDM) has the advantage of being able to process complex workpieces with relatively simple operations. However, when processing complex components in a suspended state, it is necessary to add support parts to be processed and formed, which indicates an excessive dependence on support. The stress intensity of the supported positions of the printing components can be modified by changing the supporting model of the parts, their density, and their distance in relation to the Z direction in the FDM printing settings. The focus of the present work was to study the influences of these three modified factors on the stress intensity of the supporting position of the printing components. In this study, 99 sets of compression tests were carried out using a position of an FDM-supported part, and the experimental results were observed and analyzed with a 3D topographic imager. A reference experiment on the anti-pressure abilities of the printing components without support was also conducted. The experimental results clarify how the above factors can affect the anti-pressure abilities of the supporting positions of the printing components. According to the results, when the supporting density is 30% and the supporting distance in the Z direction is Z = 0.14, the compressive strength of the printing component is lowest. When the supporting density of the printing component is ≤30% and the supporting distance in the Z direction is Z ≥ 0.10, the compressive strength of printing without support is greater than that of the linear support model. Under the same conditions, the grid-support method offers the highest compressive strength.

scholarly journals Is contact angle a cause or an effect? – A cautionary tale

2020 ◽  
Vol 146 ◽  
pp. 03004
Author(s):  
Douglas Ruth
Keyword(s):  
Contact Angle ◽  
Solid Surface ◽  
Contact Angles ◽  
Two Dimensions ◽  
Experimental Results ◽  
Flow In Porous Media ◽  
Two Dimensional ◽  
Wide Range ◽  
Fluid Drop ◽  
Surrounding Fluid

The most influential parameter on the behavior of two-component flow in porous media is “wettability”. When wettability is being characterized, the most frequently used parameter is the “contact angle”. When a fluid-drop is placed on a solid surface, in the presence of a second, surrounding fluid, the fluid-fluid surface contacts the solid-surface at an angle that is typically measured through the fluid-drop. If this angle is less than 90°, the fluid in the drop is said to “wet” the surface. If this angle is greater than 90°, the surrounding fluid is said to “wet” the surface. This definition is universally accepted and appears to be scientifically justifiable, at least for a static situation where the solid surface is horizontal. Recently, this concept has been extended to characterize wettability in non-static situations using high-resolution, two-dimensional digital images of multi-component systems. Using simple thought experiments and published experimental results, many of them decades old, it will be demonstrated that contact angles are not primary parameters – their values depend on many other parameters. Using these arguments, it will be demonstrated that contact angles are not the cause of wettability behavior but the effect of wettability behavior and other parameters. The result of this is that the contact angle cannot be used as a primary indicator of wettability except in very restricted situations. Furthermore, it will be demonstrated that even for the simple case of a capillary interface in a vertical tube, attempting to use simply a two-dimensional image to determine the contact angle can result in a wide range of measured values. This observation is consistent with some published experimental results. It follows that contact angles measured in two-dimensions cannot be trusted to provide accurate values and these values should not be used to characterize the wettability of the system.

scholarly journals An information theoretic approach to link prediction in multiplex networks

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Seyed Hossein Jafari ◽  
Amir Mahdi Abdolhosseini-Qomi ◽  
Masoud Asadpour ◽  
Maseud Rahgozar ◽  
Naser Yazdani
Keyword(s):  
Real World ◽  
Link Prediction ◽  
Large Scale ◽  
Similarity Measures ◽  
Prediction Method ◽  
General Purpose ◽  
Fast Method ◽  
Theoretic Approach ◽  
Multiplex Networks ◽  
Wide Range

AbstractThe entities of real-world networks are connected via different types of connections (i.e., layers). The task of link prediction in multiplex networks is about finding missing connections based on both intra-layer and inter-layer correlations. Our observations confirm that in a wide range of real-world multiplex networks, from social to biological and technological, a positive correlation exists between connection probability in one layer and similarity in other layers. Accordingly, a similarity-based automatic general-purpose multiplex link prediction method—SimBins—is devised that quantifies the amount of connection uncertainty based on observed inter-layer correlations in a multiplex network. Moreover, SimBins enhances the prediction quality in the target layer by incorporating the effect of link overlap across layers. Applying SimBins to various datasets from diverse domains, our findings indicate that SimBins outperforms the compared methods (both baseline and state-of-the-art methods) in most instances when predicting links. Furthermore, it is discussed that SimBins imposes minor computational overhead to the base similarity measures making it a potentially fast method, suitable for large-scale multiplex networks.

scholarly journals Molecularly Imprinted Polymer-Based Sensors for Priority Pollutants

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2406
Author(s):  
Mashaalah Zarejousheghani ◽  
Parvaneh Rahimi ◽  
Helko Borsdorf ◽  
Stefan Zimmermann ◽  
Yvonne Joseph
Keyword(s):  
Environmental Protection Agency ◽  
Selective Adsorption ◽  
Low Cost ◽  
Health And Safety ◽  
Priority Pollutants ◽  
Molecularly Imprinted ◽  
Innovative Strategies ◽  
Safety Issues ◽  
Long Term Stability ◽  
Wide Range

Globally, there is growing concern about the health risks of water and air pollution. The U.S. Environmental Protection Agency (EPA) has developed a list of priority pollutants containing 129 different chemical compounds. All of these chemicals are of significant interest due to their serious health and safety issues. Permanent exposure to some concentrations of these chemicals can cause severe and irrecoverable health effects, which can be easily prevented by their early identification. Molecularly imprinted polymers (MIPs) offer great potential for selective adsorption of chemicals from water and air samples. These selective artificial bio(mimetic) receptors are promising candidates for modification of sensors, especially disposable sensors, due to their low-cost, long-term stability, ease of engineering, simplicity of production and their applicability for a wide range of targets. Herein, innovative strategies used to develop MIP-based sensors for EPA priority pollutants will be reviewed.

Numerical investigation of the propagation of shock waves in rigid porous materials: development of the computer code and comparison with experimental results

1996 ◽  
Vol 324 ◽  
pp. 163-179 ◽  
Author(s):  
A. Levy ◽  
G. Ben-Dor ◽  
S. Sorek
Keyword(s):  
Porous Materials ◽  
Initial Conditions ◽  
Computer Code ◽  
Experimental Results ◽  
Numerical Code ◽  
Materials Development ◽  
Numerical Predictions ◽  
Wide Range ◽  
Dimensional Version ◽  
The One

The governing equations of the flow field which is obtained when a thermoelastic rigid porous medium is struck head-one by a shock wave are developed using the multiphase approach. The one-dimensional version of these equations is solved numerically using a TVD-based numerical code. The numerical predictions are compared to experimental results and good to excellent agreements are obtained for different porous materials and a wide range of initial conditions.

Experimental Studies on Cooling Effectiveness of the Double-Decker Air Jet Impingement With Film Outflow

2007 ◽  
Author(s):  
Junkui Mao ◽  
Wen Guo ◽  
Zhenxiong Liu ◽  
Jun Zeng
Keyword(s):  
Infrared Radiation ◽  
Experimental Studies ◽  
Jet Impingement ◽  
Experimental Results ◽  
Thermal Camera ◽  
Local Cooling ◽  
Cooling Effectiveness ◽  
Air Jet ◽  
Double Decker ◽  
Wide Range

Experiments were carried out to investigate the cooling effectiveness of a lamellar double-decker impingement/effusion structure. Infrared radiation (I.R.) thermal camera was used to measure the temperature on the outside surface of the lamellar double-decker. Experimental results were obtained for a wide range of governing parameters (blowing rate M (0.0017∼0.0066), the ratio of the jet impingement distance to the diameter of film hole H/D (0.5∼1.25), the ratio of the distance between the jet hole and film hole to the diameter of the film hole P/D (0, 3, 4), and the material of double-decker (Steel and Copper)). It was observed that the local cooling effectiveness η varies with all these parameters in a complicated way. All the results show that higher cooling effectiveness η is achieved in larger blowing rate cases. A certain range of H/D and P/D can be designed to result in the maximum cooling effectiveness η. And η is less sensitive to the material type compared with those parameters such as H/D, M and P/D.

Sign in / Sign up

Export Citation Format

Share Document