scholarly journals Study on Thermoelectric Conversion and Conjugate Heat Transfer for PCBA by Finite Element Analysis

2019 ◽  
Vol 10 (1) ◽  
pp. 197
Author(s):  
Ah-Der Lin ◽  
Sian Zheng Poon ◽  
Hong-Wei Tu ◽  
Cheng-Yi Chen ◽  
Chao-Ming Hsu
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
High Power ◽  
Conjugate Heat Transfer ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
High Power Led

In this study, the optical sphere and the power analyzer were exploited to measure the optical and power parameters for the high-power LED lamps. The results, derived from the experimental data, were used as the power distribution inputs in the finite element analysis (FEA) for the determination of the temperature distribution for the printed circuit board assembly (PCBA) built in the LED lamp. In the finite element analysis, the conjugate heat transfer model was adapted for the calculation of the heat transfer, including thermal conductivity, convection and radiation. Applied on the power chips located on the PCBA, the graphene thermal interface material (TIMs) had been studied for its effects on the temperature distribution. For an accurate simulation about the LED lamp, the model with closed and compact space was built in the analysis. Compared to the experimental data, it showed that the simulation results had a deviation in the range of 3–5% around the main heating source, the light-emitting diodes. It proves the FEA model proposed in this study were well developed for the simulation of the temperature distribution for the high-power LED lamps which have mixed heat transfer mechanisms. The thermal radiation effects by TIMs with graphene were also investigated in this study and proven to be useful for the heat dissipation for the LED lamps.

Experimental Platforms and Finite Element Analysis on Hot Stamping Processes

2014 ◽  
Vol 1063 ◽  
pp. 334-338 ◽  
Author(s):  
Tzu Hao Hung ◽  
Heng Kuang Tsai ◽  
Fuh Kuo Chen ◽  
Ping Kun Lee
Keyword(s):  
Heat Transfer ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Process Design ◽  
Hot Stamping ◽  
Boron Steel ◽  
Transfer Coefficients ◽  
Element Analysis ◽  
Heat Transfer Coefficients ◽  
The Finite Element Analysis

Due to the complexity of hot stamping mechanism, including the coupling of material formability, thermal interaction and metallurgical microstructure, it makes the process design more difficult even with the aid of the finite element analysis. In the present study, the experimental platforms were developed to measure and derive the friction and heat transfer coefficients, respectively. The experiments at various elevated temperatures and contact pressures were conducted and the friction coefficients and heat transfer coefficients were obtained. A finite element model was also established with the experimental data and the material properties of the boron steel calculated from the JMatPro software. The finite element simulations for the hot stamping forming of an automotive door beam, including transportation analysis, hot forming analysis and die quenching analysis were then performed to examine the forming properties of the door beam. The validation of the finite element results by the production part confirms the efficiency and accuracy of the developed experimental platforms and the finite element analysis for the process design of hot stamping.

The Finite Element Analysis of Omni-Direction Side-Loading Forklift Truck Lifting System Based on COSMOSWorks

2012 ◽  
Vol 184-185 ◽  
pp. 534-537
Author(s):  
Jing Jing Zhou ◽  
Ai Dong Guo ◽  
Chun Hui Li ◽  
Zhen Jiang Lin ◽  
Tie Zhuang Wu
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Optimization ◽  
Experimental Measurements ◽  
Element Analysis ◽  
Forklift Truck ◽  
The Finite Element Analysis ◽  
Lifting System

By setting contact sets, achieved overall analysis results of the mechanical properties with omni-direction side-loading forklift truck lifting system based on COSMOSWorks. And made an experimental measurements to omni-direction side-loading forklift truck lifting system by electrometric methods. There was a good relevance between experimental data and calculation values, and the deviation was basically within the 10 percent allowed. Finally, in this way it verified the correctness and reliability of the finite element analysis by experimental measurements. Ensured the omni-direction side-loading forklift truck lifting system could be safe and efficient to work. And also it laid a foundation for subsequent structural optimization.

Numerical Simulation of Stress and Deformation on Heat Transfer

2011 ◽  
Vol 422 ◽  
pp. 842-845
Author(s):  
Xue Ping Wang ◽  
Ying Zhang ◽  
Pan Li ◽  
Zhen Wei Zhang
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Heat Exchange ◽  
Structure Design ◽  
Stress And Strain ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Stress And Deformation

This paper primarily simulates the heat exchange part’s stress and strain situation under the load of temperature and gravity and their coupling impact aiming at obtaining the stress and deformation distribution. The authors took advantage of the method of the finite element analysis to study the stress and strain situation. Through the analysis, each part of the transfer’s stress and strain can be calculated. The conclusion of this paper provides the basis for the further enhancement of the machine life and optimization of the structure design.

Mathematical Modeling and Experimental Study on Electrochemical Deburring of Miniature Holes

2013 ◽  
Vol 721 ◽  
pp. 382-386 ◽  
Author(s):  
Ze Fei Wei ◽  
Xing Hua Zheng ◽  
Zi Yuan Yu
Keyword(s):  
Mathematical Modeling ◽  
Experimental Data ◽  
Mathematical Model ◽  
Finite Element Analysis ◽  
Experimental Study ◽  
Finite Element ◽  
Electrochemical Machining ◽  
Current Density Distribution ◽  
Element Analysis ◽  
The Finite Element Analysis

The paper mainly focused on burr removal of the miniature hole drilled on aluminum plate by electrochemical machining. A mathematical model for the electrochemical deburring of miniature holes (M-ECD) was established based on the finite element analysis to the current density distribution. Both theoretical analysis and experimental study were held on the effects of many factors to the deburring results. The results proved that predictions based on our mathematical model were agreed with the experimental data comparatively.

Distortion Simulation of Unsymmetrical Composite Laminates Using the Finite Element Analysis Method

2007 ◽  
Vol 546-549 ◽  
pp. 1563-1566
Author(s):  
Min Li ◽  
Bao Yan Zhang ◽  
Xiang Bao Chen
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Laminates ◽  
Shell Element ◽  
Element Analysis ◽  
Unsymmetric Laminates ◽  
The Finite Element Analysis ◽  
Simulation Results ◽  
The Difference

Unsymmetric composite laminates were benefit to reducing the structure weight of some aircrafts. However, the cured unsymmetric laminates showed distortion at room temperature. Therefore, predicting the deformation before using the unsymmetrical composite is very important. In this study an attempt was made to predict the shapes of some unsymmetric cross-ply laminates using the finite element analysis (FEA). The bilinear shell-element was adopted in the process. Then the simulation results were compared with the experimental data. The studies we had performed showed that the theoretical calculation agreed well with the experimental results, the predicted shapes were similar to the real laminates, and the difference between the calculated maximum deflections and the experimental data were less than 5%. Hence the FEA method was suitable for predicting the warpage of unsymmetric laminates. The error analysis showed that the simulation results were very sensitive to the lamina thickness, 2 α and (T.

Ratcheting due to Thermal Stratification

2019 ◽  
Author(s):  
R. Adibi-Asl ◽  
D. O’Kane ◽  
E. Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Distribution ◽  
Thermal Stratification ◽  
Fluid Flows ◽  
Uniform Temperature ◽  
Element Analysis ◽  
Steady State Condition ◽  
Thermal Ratcheting ◽  
The Finite Element Analysis

Abstract Thermal ratcheting is required to be checked by most of the piping design codes, specifically the ASME B&PV Code. For cases where the variation of temperature distribution is not uniform, the existing ratchet check methodology for piping is inadequate and therefore the finite element analysis (FEA) is often used to perform ratchet checks. Thermal stratification, in which cold and hot fluid flows are layered in a relatively steady state condition, is a good example of non-linear/non-uniform temperature distribution across the pipe. This paper develops straightforward equations to address thermal stratification in piping. Finite element analysis is used to benchmark the results.

Sign in / Sign up

Export Citation Format

Share Document