scholarly journals The Fate of MTBE and BTEX in Constructed Wetlands

2019 ◽  
Vol 10 (1) ◽  
pp. 127 ◽  
Author(s):  
Alexandros I. Stefanakis
Keyword(s):  
Constructed Wetlands ◽  
Power Plants ◽  
High Efficiency ◽  
Petroleum Industry ◽  
Green Technology ◽  
Hydrocarbon Contamination ◽  
Methyl Tert Butyl Ether ◽  
Butyl Ether ◽  
Oil Refineries ◽  
Global Issue

Hydrocarbon contamination of water resources is a global issue. These compounds are generated and discharged into the environment in industrial areas from chemical and petrochemical plants, oil refineries, power plants, and so forth. Fuel hydrocarbons, namely, BTEX (benzene, toluene, ethylbenzene, and xylenes) and MTBE (methyl tert-butyl ether), are commonly found in groundwater, posing environmental and health risks to humans and ecosystems. Nature-based technologies represent an alternative solution, providing high efficiency, an environmentally friendly character, simple operation, and cost efficiency, which are characteristics particularly desired by the international petroleum industry. This article discusses the use of the green technology of constructed wetlands to remediate water polluted with hydrocarbons. Although the number of related international experiences and studies is limited, the article presents the latest developments of wetland technology for the removal of MTBE and benzene-BTEX. The discussion includes the overall efficiency of the different wetland types that have been tested and used, the main transformation and removal processes that regulate the fate of BTEX and MTBE in constructed wetlands, and the potential for future investigations.

"Recent Patents on the Triboelectrostatic Separation of Fly Ash"

2019 ◽  
Vol 13 ◽  
Author(s):  
Haisheng Li ◽  
Wenping Wang ◽  
Yinghua Chen ◽  
Xinxi Zhang ◽  
Chaoyong Li
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Separation Efficiency ◽  
High Reliability ◽  
Operating Conditions ◽  
Security Requirements ◽  
Unburned Carbon ◽  
Efficient Operation ◽  
Triboelectrostatic Separation

Background: The fly ash produced by coal-fired power plants is an industrial waste. The environmental pollution problems caused by fly ash have been widely of public environmental concern. As a waste of recoverable resources, it can be used in the field of building materials, agricultural fertilizers, environmental materials, new materials, etc. Unburned carbon content in fly ash has an influence on the performance of resource reuse products. Therefore, it is the key to remove unburned carbon from fly ash. As a physical method, triboelectrostatic separation technology has been widely used because of obvious advantages, such as high-efficiency, simple process, high reliability, without water resources consumption and secondary pollution. Objective: The related patents of fly ash triboelectrostatic separation had been reviewed. The structural characteristics and working principle of these patents are analyzed in detail. The results can provide some meaningful references for the improvement of separation efficiency and optimal design. Methods: Based on the comparative analysis for the latest patents related to fly ash triboelectrostatic separation, the future development is presented. Results: The patents focused on the charging efficiency and separation efficiency. Studies show that remarkable improvements have been achieved for the fly ash triboelectrostatic separation. Some patents have been used in industrial production. Conclusion: According to the current technology status, the researches related to process optimization and anti-interference ability will be beneficial to overcome the influence of operating conditions and complex environment, and meet system security requirements. The intelligent control can not only ensure the process continuity and stability, but also realize the efficient operation and management automatically. Meanwhile, the researchers should pay more attention to the resource utilization of fly ash processed by triboelectrostatic separation.

scholarly journals Continuous-Flow Photocatalytic Microfluidic-Reactor for the Treatment of Aqueous Contaminants, Simplicity, and Complexity: A Mini-Review

Symmetry ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1325
Author(s):  
Zhongwei Gao ◽  
Changqing Pan ◽  
Chang-Ho Choi ◽  
Chih-Hung Chang
Keyword(s):  
Continuous Flow ◽  
Lower Energy ◽  
High Efficiency ◽  
Diffusion Length ◽  
Physical Adsorption ◽  
Chemical Oxidation ◽  
Microfluidic Reactor ◽  
Global Issue ◽  
The Individual ◽  
Aqueous Contaminants

Water pollution is a growing global issue; there are many approaches to treating wastewater, including chemical coagulation, physical adsorption, and chemical oxidation. The photocatalysis process has provided a solution for removing pollutants from wastewater, where the pair of the photoelectron and hole works through an asymmetric way to degrade the contaminants under UV irradiation. This method offers an alternative route for treating the pollutant with a lower energy cost, high efficiency, and fewer byproducts. A continuous-flow microfluidic reactor has a channel size from tens to thousands of micrometers, providing uniform irradiation and short diffusion length. It can enhance the conversion efficiency of photocatalysis due to the simple spatial symmetry inside the microreactor channel and among the individual channels. In addition, the bandgap of TiO2, ZnO, or other photocatalyst nanoparticles with symmetric crystal structure can be modified through doping or embedding. In this mini-review, a review of the reported continuous-flow photocatalytic microfluidic reactor is discussed from the perspective of both microreactor design and material engineering.

scholarly journals Biodegradation of Methyl tert-Butyl Ether and Other Fuel Oxygenates by a New Strain, Mycobacterium austroafricanum IFP 2012

2002 ◽  
Vol 68 (6) ◽  
pp. 2754-2762 ◽  
Author(s):  
Alan François ◽  
Hugues Mathis ◽  
Davy Godefroy ◽  
Pascal Piveteau ◽  
Françoise Fayolle ◽  
...  
Keyword(s):  
Polyacrylamide Gel Electrophoresis ◽  
Sodium Dodecyl ◽  
Dry Weight ◽  
Butyl Alcohol ◽  
Amyl Alcohol ◽  
Methyl Tert Butyl Ether ◽  
Methylotrophic Bacterium ◽  
Specific Rate ◽  
Butyl Ether ◽  
Mycobacterium Austroafricanum

ABSTRACT A strain that efficiently degraded methyl tert-butyl ether (MTBE) was obtained by initial selection on the recalcitrant compound tert-butyl alcohol (TBA). This strain, a gram-positive methylotrophic bacterium identified as Mycobacterium austroafricanum IFP 2012, was also able to degrade tert-amyl methyl ether and tert-amyl alcohol. Ethyl tert-butyl ether was weakly degraded. tert-Butyl formate and 2-hydroxy isobutyrate (HIBA), two intermediates in the MTBE catabolism pathway, were detected during growth on MTBE. A positive effect of Co2+ during growth of M. austroafricanum IFP 2012 on HIBA was demonstrated. The specific rate of MTBE degradation was 0.6 mmol/h/g (dry weight) of cells, and the biomass yield on MTBE was 0.44 g (dry weight) per g of MTBE. MTBE, TBA, and HIBA degradation activities were induced by MTBE and TBA, and TBA was a good inducer. Involvement of at least one monooxygenase during degradation of MTBE and TBA was shown by (i) the requirement for oxygen, (ii) the production of propylene epoxide from propylene by MTBE- or TBA- grown cells, and (iii) the inhibition of MTBE or TBA degradation and of propylene epoxide production by acetylene. No cytochrome P-450 was detected in MTBE- or TBA-grown cells. Similar protein profiles were obtained after sodium dodecyl sulfate-polyacrylamide gel electrophoresis of crude extracts from MTBE- and TBA-grown cells. Among the polypeptides induced by these substrates, two polypeptides (66 and 27 kDa) exhibited strong similarities with known oxidoreductases.

Phthalate degradation by glow discharge plasma enhanced with pyrite in aqueous solution

2016 ◽  
Vol 74 (6) ◽  
pp. 1365-1375 ◽  
Author(s):  
Chensi Shen ◽  
Shaoshuai Wu ◽  
Hui Chen ◽  
Sadia Rashid ◽  
Yuezhong Wen
Keyword(s):  
Aqueous Solution ◽  
Energy Efficiency ◽  
Glow Discharge ◽  
Discharge Plasma ◽  
Ph Value ◽  
Glow Discharge Plasma ◽  
Methyl Tert Butyl Ether ◽  
Butyl Ether ◽  
Polymeric Compound ◽  
X Ray

In order to prevent health risk from potential exposures to phthalates, a glow discharge plasma (GDP) process was applied for phthalate degradation in aqueous solution. The results revealed that the phthalate derivatives 4-hydroxyphthalic acid, 4-methylphthalic acid and 4-tert-butylphthalic anhydride could be degraded efficiently in GDP process (498 V, 0.2 A) with high removal efficiencies of over 99% in 60 minutes. Additionally, pyrite as a promising heterogeneous iron source in the Fenton reaction was found to be favorable for GDP process. The phthalate degradation reaction could be significantly enhanced by the continuous formation of •OH and the inhibition of the quenching reaction in the pyrite Fenton system due to the constant dissolution of Fe(II) from pyrite surface. Meanwhile, the initial pH value showed little impact on the degradation of phthalates and the energy efficiency of GDP system for phthalate degradation ranged between 0.280 × 10−9 and 1.210 × 10−9 mol/J, which is similar to the GDP system with phenol, bisphenol A and methyl tert-butyl ether as the substrates. Further, the X-ray diffraction and scanning electron microscopy with energy dispersive X-ray spectroscopy analyses indicated that the pyrite was relatively stable in GDP system and there was no obvious polymeric compound formed on the catalyst surface. Overall, this GDP process offers high removal efficiency, simple technology, considerable energy efficiency and the applicability to salt-containing phthalate wastewater.

Direct dissolution of gallstones with methyl tert-butyl ether (MTBE) via endoscopic transpapillary catheterization in the gallbladder (ETCG)

1994 ◽  
Vol 29 (4) ◽  
pp. 486-494 ◽  
Author(s):  
Naohito Uchida ◽  
Toshiaki Nakatsu ◽  
Shuko Hirabayashi ◽  
Atsushi Minami ◽  
Hiroki Fukuma ◽  
...  
Keyword(s):  
Methyl Tert Butyl Ether ◽  
Butyl Ether ◽  
Tert Butyl ◽  
Direct Dissolution ◽  
Dissolution Of Gallstones
Sign in / Sign up

Export Citation Format

Share Document