scholarly journals Prediction of Ambient PM2.5 Concentrations Using a Correlation Filtered Spatial-Temporal Long Short-Term Memory Model

2019 ◽  
Vol 10 (1) ◽  
pp. 14 ◽  
Author(s):  
Yuexiong Ding ◽  
Zheng Li ◽  
Chengdian Zhang ◽  
Jun Ma

Due to the increasingly serious air pollution problem, air quality prediction has been an important approach for air pollution control and prevention. Many prediction methods have been proposed in recent years to improve the prediction accuracy. However, most of the existing methods either did not consider the spatial relationships between monitoring stations or overlooked the strength of the correlation. Excluding the spatial correlation or including too much weak spatial inputs could influence the modeling and reduce the prediction accuracy. To overcome the limitation, this paper proposes a correlation filtered spatial-temporal long short-term memory (CFST-LSTM) model for air quality prediction. The model is designed based on the original LSTM model and is equipped with a spatial-temporal filter (STF) layer. This layer not only takes into account the spatial influence between stations, but also can extract highly correlated sequential data and drop weaker ones. To evaluate the proposed CFST-LSTM model, hourly PM2.5 concentration data of California are collected and preprocessed. Several experiments are conducted. The experimental results show that the CFST-LSTM model can effectively improve the prediction accuracy and has great generalization.

Author(s):  
Herwin Alayn Huillcen Baca ◽  
Flor de Luz Palomino Valdivia ◽  
Manuel J. Ibarra ◽  
Mario Aquino Cruz ◽  
Melvin Edward Huillcen Baca

Atmosphere ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1172
Author(s):  
Hyunsu Hong ◽  
Hyungjin Jeon ◽  
Cheong Youn ◽  
Hyeon-Soo Kim

Air pollution sources and the hazards of high particulate matter 2.5 (PM2.5) concentrations among air pollutants have been well documented. Shipping emissions have been identified as a source of air pollution; therefore, it is necessary to predict air pollutant concentrations to manage seaport air quality. However, air pollution prediction models rarely consider shipping emissions. Here, the PM2.5 concentrations of the Busan North and Busan New Ports were predicted using a recurrent neural network and long short-term memory model by employing the shipping activity data of Busan Port. In contrast to previous studies that employed only air quality and meteorological data as input data, our model considered shipping activity data as an emission source. The model was trained from 1 January 2019 to 31 January 2020 and predictions and verifications were performed from 1–28 February 2020. Verifications revealed an index of agreements (IOA) of 0.975 and 0.970 and root mean square errors of 4.88 and 5.87 µg/m3 for Busan North Port and Busan New Port, respectively. Regarding the results based on the activity data, a previous study reported an IOA of 0.62–0.84, with a higher predictive power of 0.970–0.975. Thus, the extended approach offers a useful strategy to prevent PM2.5 air pollutant-induced damage in seaports.


Author(s):  
Azim Heydari ◽  
Meysam Majidi Nezhad ◽  
Davide Astiaso Garcia ◽  
Farshid Keynia ◽  
Livio De Santoli

AbstractAir pollution monitoring is constantly increasing, giving more and more attention to its consequences on human health. Since Nitrogen dioxide (NO2) and sulfur dioxide (SO2) are the major pollutants, various models have been developed on predicting their potential damages. Nevertheless, providing precise predictions is almost impossible. In this study, a new hybrid intelligent model based on long short-term memory (LSTM) and multi-verse optimization algorithm (MVO) has been developed to predict and analysis the air pollution obtained from Combined Cycle Power Plants. In the proposed model, long short-term memory model is a forecaster engine to predict the amount of produced NO2 and SO2 by the Combined Cycle Power Plant, where the MVO algorithm is used to optimize the LSTM parameters in order to achieve a lower forecasting error. In addition, in order to evaluate the proposed model performance, the model has been applied using real data from a Combined Cycle Power Plant in Kerman, Iran. The datasets include wind speed, air temperature, NO2, and SO2 for five months (May–September 2019) with a time step of 3-h. In addition, the model has been tested based on two different types of input parameters: type (1) includes wind speed, air temperature, and different lagged values of the output variables (NO2 and SO2); type (2) includes just lagged values of the output variables (NO2 and SO2). The obtained results show that the proposed model has higher accuracy than other combined forecasting benchmark models (ENN-PSO, ENN-MVO, and LSTM-PSO) considering different network input variables. Graphic abstract


Author(s):  
H. Fan ◽  
M. Yang ◽  
F. Xiao ◽  
K. Zhao

Abstract. Over the past few decades, air pollution has caused serious damage on public health, thus making accurate predictions of PM2.5 crucial. Due to the transportation of air pollutants among areas, the PM2.5 concentration is strongly spatiotemporal correlated. However, the distribution of air pollution monitoring sites is not even, making the spatiotemporal correlation between the central site and surrounding sites varies with different density of sites, and this was neglected by most existing methods. To tackle this problem, this study proposed a weighted long short-term memory neural network extended model (WLSTME), which addressed the issue that how to consider the effect of the density of sites and wind condition on the spatiotemporal correlation of air pollution concentration. First, several the nearest surrounding sites were chosen as the neighbour sites to the central station, and their distance as well as their air pollution concentration and wind condition were input to multi-layer perception (MLP) to generate weighted historical PM2.5 time series data. Second, historical PM2.5 concentration of the central site and weighted PM2.5 series data of neighbour sites were input into LSTM to address spatiotemporal dependency simultaneously and extract spatiotemporal features. Finally, another MLP was utilized to integrate spatiotemporal features extracted above with the meteorological data of central site to generate the forecasts future PM_2.5 concentration of the central site. Daily PM_2.5 concentration and meteorological data on Beijing–Tianjin–Hebei from 2015 to 2017 were collected to train models and evaluate the performance. Experimental results with 3 other methods showed that the proposed WLSTME model has the lowest RMSE (40.67) and MAE (26.10) and the highest p (0.59). This finding confirms that WLSTME can significantly improve the PM2.5 prediction accuracy.


Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 2946 ◽  
Author(s):  
Wangyang Wei ◽  
Honghai Wu ◽  
Huadong Ma

Smart cities can effectively improve the quality of urban life. Intelligent Transportation System (ITS) is an important part of smart cities. The accurate and real-time prediction of traffic flow plays an important role in ITSs. To improve the prediction accuracy, we propose a novel traffic flow prediction method, called AutoEncoder Long Short-Term Memory (AE-LSTM) prediction method. In our method, the AutoEncoder is used to obtain the internal relationship of traffic flow by extracting the characteristics of upstream and downstream traffic flow data. Moreover, the Long Short-Term Memory (LSTM) network utilizes the acquired characteristic data and the historical data to predict complex linear traffic flow data. The experimental results show that the AE-LSTM method had higher prediction accuracy. Specifically, the Mean Relative Error (MRE) of the AE-LSTM was reduced by 0.01 compared with the previous prediction methods. In addition, AE-LSTM method also had good stability. For different stations and different dates, the prediction error and fluctuation of the AE-LSTM method was small. Furthermore, the average MRE of AE-LSTM prediction results was 0.06 for six different days.


2020 ◽  
Vol 12 (6) ◽  
pp. 2570 ◽  
Author(s):  
Thanongsak Xayasouk ◽  
HwaMin Lee ◽  
Giyeol Lee

Many countries worldwide have poor air quality due to the emission of particulate matter (i.e., PM10 and PM2.5), which has led to concerns about human health impacts in urban areas. In this study, we developed models to predict fine PM concentrations using long short-term memory (LSTM) and deep autoencoder (DAE) methods, and compared the model results in terms of root mean square error (RMSE). We applied the models to hourly air quality data from 25 stations in Seoul, South Korea, for the period from 1 January 2015, to 31 December 2018. Fine PM concentrations were predicted for the 10 days following this period, at an optimal learning rate of 0.01 for 100 epochs with batch sizes of 32 for LSTM model, and DAEs model performed best with batch size 64. The proposed models effectively predicted fine PM concentrations, with the LSTM model showing slightly better performance. With our forecasting model, it is possible to give reliable fine dust prediction information for the area where the user is located.


Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 4017 ◽  
Author(s):  
Dukhwan Yu ◽  
Wonik Choi ◽  
Myoungsoo Kim ◽  
Ling Liu

The problem of Photovoltaic (PV) power generation forecasting is becoming crucial as the penetration level of Distributed Energy Resources (DERs) increases in microgrids and Virtual Power Plants (VPPs). In order to improve the stability of power systems, a fair amount of research has been proposed for increasing prediction performance in practical environments through statistical, machine learning, deep learning, and hybrid approaches. Despite these efforts, the problem of forecasting PV power generation remains to be challenging in power system operations since existing methods show limited accuracy and thus are not sufficiently practical enough to be widely deployed. Many existing methods using long historical data suffer from the long-term dependency problem and are not able to produce high prediction accuracy due to their failure to fully utilize all features of long sequence inputs. To address this problem, we propose a deep learning-based PV power generation forecasting model called Convolutional Self-Attention based Long Short-Term Memory (LSTM). By using the convolutional self-attention mechanism, we can significantly improve prediction accuracy by capturing the local context of the data and generating keys and queries that fit the local context. To validate the applicability of the proposed model, we conduct extensive experiments on both PV power generation forecasting using a real world dataset and power consumption forecasting. The experimental results of power generation forecasting using the real world datasets show that the MAPEs of the proposed model are much lower, in fact by 7.7%, 6%, 3.9% compared to the Deep Neural Network (DNN), LSTM and LSTM with the canonical self-attention, respectively. As for power consumption forecasting, the proposed model exhibits 32%, 17% and 44% lower Mean Absolute Percentage Error (MAPE) than the DNN, LSTM and LSTM with the canonical self-attention, respectively.


Sign in / Sign up

Export Citation Format

Share Document