scholarly journals A Comparison of Traditional and Geometric Morphometric Techniques for the Study of Basicranial Morphology in Horses: A Case Study of the Araucanian Horse from Colombia

Animals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 118
Author(s):  
Pere Miquel Parés-Casanova ◽  
Arcesio Salamanca-Carreño ◽  
René Alejandro Crosby-Granados ◽  
Jannet Bentez-Molano

Skull size and shape have been widely used to study domestic animal populations and breeds. Although several techniques have been proposed to quantify cranial form, few attempts have been made to compare the results obtained by different techniques. While linear morphometrics has traditionally been used in breed characterization, recent advances in geometric morphometrics have created new techniques for specifically quantifying shape and size. The objective of this study was to compare two morphometric methods for their ability to describe external morphology. For this purpose, 20 skull specimens of adult male Araucanian horses were examined. Two age categories were established (the “mature group”, M3 not fully erupted to moderately worn, n = 7; and the “senile group”, M3 totally erupted and highly worn, n = 13). Both methods showed that there were statistical differences between generations, but discrimination rates were different between methods with the geometric morphometric analysis obtaining a rate of 97.5%. Although linear morphometrics was found to be compatible with geometric morphometrics, the latter was better able to discriminate the two groups and it also provides more information on shape.

2015 ◽  
Vol 105 (1) ◽  
pp. 76-83 ◽  
Author(s):  
Valeria P. Diawol ◽  
Federico Giri ◽  
Pablo A. Collins

Crustacean growth studies typically use modal analysis rather than focusing on the growth of individuals. In the present work, we use geometric morphometrics to determine how organism shape and size varies during the life of the freshwater crab, Aegla uruguayana Schmitt, 1942. A total of 66 individuals from diverse life cycle stages were examined daily and each exuvia was recorded. Digital images of the dorsal region of the cephalothorax were obtained for each exuvia and were subsequently used to record landmark configurations. Moult increment and intermoult period were estimated for each crab. Differences in shape between crabs of different sizes (allometry) and sexes (sexual dimorphism; SD) were observed. Allometry was registered among specimens; however, SD was not statistically significant between crabs of a given size. The intermoult period increased as size increased, but the moult frequency was similar between the sexes. Regarding ontogeny, juveniles had short and blunt rostrum, robust forehead region, and narrow cephalothorax. Unlike juveniles crabs, adults presented a well-defined anterior and posterior cephalothorax region. The rostrum was long and stylised and the forehead narrow. Geometric morphometric methods were highly effective for the analysis of aeglid-individual- growth and avoided excessive handling of individuals through exuvia analysis.


Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.


2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Michaela Kerschbaumer ◽  
Christian Sturmbauer

Fishes of the family Cichlidae are famous for their spectacular species flocks and therefore constitute a model system for the study of the pathways of adaptive radiation. Their radiation is connected to trophic specialization, manifested in dentition, head morphology, and body shape. Geometric morphometric methods have been established as efficient tools to quantify such differences in overall body shape or in particular morphological structures and meanwhile found wide application in evolutionary biology. As a common feature, these approaches define and analyze coordinates of anatomical landmarks, rather than traditional counts or measurements. Geometric morphometric methods have several merits compared to traditional morphometrics, particularly for the distinction and analysis of closely related entities. Cichlid evolutionary research benefits from the efficiency of data acquisition, the manifold opportunities of analyses, and the potential to visualize shape changes of those landmark-based methods. This paper briefly introduces to the concepts and methods of geometric morphometrics and presents a selection of publications where those techniques have been successfully applied to various aspects of cichlid fish diversification.


2017 ◽  
Vol 13 (8) ◽  
pp. 20170321 ◽  
Author(s):  
Allowen Evin ◽  
Joseph Owen ◽  
Greger Larson ◽  
Mélanie Debiais-Thibaud ◽  
Thomas Cucchi ◽  
...  

Domestic animals are often described as paedomorphic, meaning that they retain juvenile characteristics into adulthood. Through a three-dimensional landmark-based geometric morphometric analysis of cranial morphology at three growth stages, we demonstrate that wild boar ( n = 138) and domestic pigs ( n = 106) ( Sus scrofa ) follow distinct ontogenetic trajectories. With the exception of the size ratio between facial and neurocranial regions, paedomorphism does not appear to be the primary pattern describing the observed differences between wild and domestic pig cranial morphologies. The cranial phenotype of domestic pigs instead involves developmental innovation during domestication. This result questions the long-standing assumption that domestic animal phenotypes are paedomorphic forms of their wild counterparts.


Author(s):  
Eva I. Riedlecker ◽  
Gail V. Ashton ◽  
Gregory M. Ruiz

Characteristics of the second gnathopod are traditionally used to distinguish between species of caprellid amphipods. However, these distinctions are often subjective and can be variable within a species. Geometric morphometrics were used to quantitatively assess shape variation of the second gnathopod propodus of three species of caprellids in North America, including the non-native Caprella mutica. Gnathopod shapes of C. mutica specimens from different latitudes revealed distinct morphologies; the factors responsible for the shape variations are unknown. Allometric change of propodus shape was observed in C. mutica. Larger individuals showed a wide array of possible propodus morphologies. Despite this variability, there were clear differences between large specimens of C. mutica and two species native to North America: C. alaskana and C. kennerlyi. The use of geometric morphometrics and the thin-plate spline method can serve to both complement descriptions using traditional keys and aid in identification of non-native species in novel geographical regions.


Author(s):  
Pere M. Parés-Casanova ◽  
C. Allés

SummaryThe existence of sexual dimorphism in the Minorcan horse, an autochthonous breed from Minorca Island in the Balearic archipelago (NW Mediterranean Sea), is established in the official standard, with females being shorter and longer than males as well as having slenderer necks and a squarer croup. However, no study so far has explored the size and shape components of this dimorphism separately. The aim of this study was to analyse the morphology of this breed using geometric morphometric methods in order to find size and shape differences between sire lines. The analysis was based on landmarks digitized in lateral view from 38 registered adult Minorcan horses (20 males and 18 females) within an age range of 3–14 years (average 7 years) with different performance goals. The analyses did not reveal any significant differences between the “shape” and “size” of male and female animals, for the landmarks studied, so the sexes are functionally similar.


Insects ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 451 ◽  
Author(s):  
Tanasak Changbunjong ◽  
Jiraporn Ruangsittichai ◽  
Gerard Duvallet ◽  
Adrian C. Pont

The genus Haematobosca Bezzi, 1907 (Diptera: Muscidae) contains haematophagous flies of veterinary importance. A new fly species of this genus was recognised from northern Thailand based on morphological characters and described as Haematobosca aberrans Pont, Duvallet & Changbunjong, 2020. In the present study, the mitochondrial cytochrome c oxidase I (COI) gene was used to confirm the morphological identification of H. aberrans. In addition, landmark-based geometric morphometrics was used to determine sexual dimorphism. The molecular analysis was conducted with 10 COI sequences. The results showed that all sequences were 100% identical. The sequence was not highly similar to reference sequences from GenBank and did not match any identified species from Barcode of Life Data Systems (BOLD). Phylogenetic analysis clearly differentiated this species from other species within the subfamily Stomoxyinae. For geometric morphometric analysis, a total of 16 wing pictures were analysed using the landmark-based approach. The results showed significant differences in wing shape between males and females, with a cross-validated classification score of 100%. The allometric analysis showed that wing shape has no correlation with size. Therefore, the COI gene is effective in species identification of H. aberrans, and geometric morphometrics is also effective in determining sexual dimorphism.


Sign in / Sign up

Export Citation Format

Share Document