scholarly journals The Effect of Different Doses of Sewage Sludge and Liming on Total Cobalt Content and its Speciation in Soil

Agronomy ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1550
Author(s):  
Elżbieta Malinowska ◽  
Kazimierz Jankowski

The aim of this paper is to evaluate the effect of liming and various doses of municipal sewage sludge (5, 10, and 15% of the weight of the soil) on cobalt total content and its speciation. The incubation experiment lasted 420 days and was conducted in controlled laboratory conditions. Soil was sampled after 30, 60, 90, and 120 days and then, with a break of 180 days, after 360 and 420 days. In all samples, cobalt total content was determined by means of ICP-AES (emission spectrophotometer), and fractions of this metal were measured with the seven-step Zeien and Brümmer method, with seven of them separated: F1–easily soluble, F2–exchangeable, F3–bound to MnOx, F4–bound to organic matter, F5–bound to amorphous FeOx, F6–bound to crystalline FeOx, and F7–residual. Compared to the control, the average content of total cobalt in the soil increased more than two times in experimental units with higher doses of sewage sludge (10% and 15% of the weight of the soil). The metal was mainly bound to the residual fraction, where it constituted 40% of its total content, while in the organic fraction, its share was 20%. In the soil incubated with sludge, cobalt in mobile fractions constituted a small percentage of its total content. Liming limited the release of this metal.

2014 ◽  
Vol 65 (3) ◽  
pp. 118-125 ◽  
Author(s):  
Jacek Antonkiewicz ◽  
Robert Pełka

Abstract The effect of addition of different materials, i.e. sludge, ash and peat, as well as different doses of mixtures of ash and sludge and ash peat, on the total content of heavy metals (Cr, Zn, Pb, Cu, Cd, Ni) and their fractions was studied. Application of municipal sewage sludge, ash-sludge and ash-peat mixtures in the experiment caused a gradual increase in the content of studied heavy metals in soil. The ash was characterized by a low content of heavy metals as compared to municipal sewage sludge. After application of peat and its mixtures with ash a decrease of content of heavy metals was observed, and when the peat was used alone the greatest increase in the organic C content in the substrate could be seen. Distribution of heavy metals in the fractions separated in different combinations shows large variations, depending on the tested metal and the studied variant. Chromium, zinc, lead, and cadmium have been accumulated mainly in the residual fraction (FV), and most of the copper and nickel have been specifically bound with organic matter (FIV). It has been found that the alkaline materials application to the soil decreased the solubility of most heavy metals, which results in a limitation of their uptake by plants. Chromium and copper were an exception, since their solubility increased with the alkalinity of the substrate. An exception was chromium and copper, which solubility increased with the alkalinity of the substrate.


Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1474
Author(s):  
Jadwiga Wierzbowska ◽  
Stanisław Sienkiewicz ◽  
Dariusz Załuski

The aim of the study was to determine the effect of sewage sludge and composts produced from sewage sludge and municipal waste on the content of various forms of nitrogen in soil. The field experiment was carried out in 2004–2015. It included three crop rotations of the following plants: potato, spring barley, winter oilseed rape and winter wheat. The experiment consisted of the following treatments: control (without fertilization), NPK, manure (FYM), compost from municipal sewage sludge and straw (CSSS), composted sewage sludge (CSS), dried and granulated sewage sludge (DGSS), “Dano” compost produced from unsorted municipal waste (CUMW) and compost from municipal green waste (CMGW). Manure, composts and sewage sludge were applied once (10 t ha−1 of d.m.) or twice (5 t ha−1 of d.m.) in a crop rotation. It was significantly shown that the highest N-total content was in the soil fertilized with CUMW (compost produced from unsorted municipal waste). The soil fertilized with manure (FYM) contained the highest quantity of N-min. The prevalent pool of nitrogen (82.65–86.52%) consisted of N compounds not undergoing acid hydrolysis, and their smallest share was determined in the soil fertilized with NPK alone.


2007 ◽  
Vol 9 (4) ◽  
pp. 102-106
Author(s):  
Ewa Krzywy-Gawrońska ◽  
Monika Rozmarynowska

The effect of composts from potato pulp and municipal sewage sludge for changes of microelements in the soil during incubation The total and soluble content of microelements in the soil was described in the laboratory experiment. The soil was incubated with three doses of composts with a participation of municipal sewage sludge and potato pulp. The obtained results of the experiment pointed that all the composts increased an average total content and the forms soluble in 1 M HCl of microelements in the soil in comparison with the control. In the majority of the variants, the composts made with the 70% participation of municipal sewage sludge and 30% addition of straw or sawdust caused an increase of the content of the analyzed elements in the soil than the composts with the 70% participation of potato pulp and 30% addition of straw or sawdust. The differences are connected with a higher content of microelements, which were put in the soil, with the composts with the 70% participation of municipal sewage sludge and 30% addition of straw or sawdust. There are no differences in the formation of the content of microelements in the soil, which were depended on the type of the structural - formative component during the production of composts. The quantity of the composts' dose had an influence on the formation of the participation of the soluble form of microelements in the total content in the soil. The participation of the soluble form of cadmium, cooper, manganese and nickel in the total content in the soil increased along with increasing the dose of composts. The content of the total forms in the soil incubated with the composts included in the standard for the light soils.


Agronomie ◽  
2001 ◽  
Vol 21 (2) ◽  
pp. 169-178 ◽  
Author(s):  
Giovanni Gigliotti ◽  
Pier Lodovico Giusquiani ◽  
Daniela Businelli

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3106
Author(s):  
Tomasz Kalak ◽  
Kinga Marciszewicz ◽  
Joanna Piepiórka-Stepuk

Recently, more and more attention has been paid to the removal of nickel ions due to their negative effects on the environment and human health. In this research, fly ash obtained as a result of incineration of municipal sewage sludge with the use of circulating fluidized bed combustion (CFBC) technology was used to analyze the possibility of removing Ni(II) ions in adsorption processes. The properties of the material were determined using analytical methods, such as SEM-EDS, XRD, BET, BJH, thermogravimetry, zeta potential, SEM, and FT-IR. Several factors were analyzed, such as adsorbent dose, initial pH, initial concentration, and contact time. As a result of the conducted research, the maximum sorption efficiency was obtained at the level of 99.9%. The kinetics analysis and isotherms showed that the pseudo-second order equation model and the Freundlich isotherm model best suited this process. In conclusion, sewage sludge fly ash may be a suitable material for the effective removal of nickel from wastewater and the improvement of water quality. This research is in line with current trends in the concepts of circular economy and sustainable development.


2014 ◽  
Vol 665 ◽  
pp. 404-407 ◽  
Author(s):  
Wan Yu ◽  
Pei Sheng Li

Moisture distribution in sewage sludge was considered as the essential of thermal drying. Some methods were given in literatures to test the moisture distribution, but there was no standard method to determine the critical water content between different kinds of water. The municipal sewage sludge was dried by hot air in this work. Based on the drying curve, the derivative of drying rate with respect to dry basis moisture content was brought out to analyze the moisture distribution in sewage sludge. Results show that this method can easily determine the free water, interstitial water, surface water and bound water with a high accuracy. The present work can provide new insight to determine the moisture distribution in sewage sludge, which was still lacking in the literatures.


2011 ◽  
Vol 383-390 ◽  
pp. 3799-3804
Author(s):  
Xiao Xu Fan ◽  
Lei Zhe Chu ◽  
Li Guo Yang

The fuel characteristics of municipal sewage sludge are suitable for dual fluidized bed(DFB) gasification, which can get middle calorific value gas through volatile pyrolysis, and reduce volume through char combustion. The hot test results of municipal sewage sludge on DFB rig were showen that the temperature distribution along combustor heigh is uniform, and the carbon content of fly ash is about 2~3%. In the experiment, with the increase of gasifier temperatrue, the more volatile of the sewage sludge was pyrolyzed. When the temperature of the gasifier reached 800°C, the calorific value of gas was 6.9MJ/Nm3; the emissions of SO2, NOx and HCl were appropriate to the standard. The leaching toxicity of heavy metal of the fly ash was lower than the discharge standard.


2013 ◽  
Vol 671-674 ◽  
pp. 2736-2741
Author(s):  
Yin An Ming ◽  
Tao Tao

To reuse municipal sewage sludge safely, experiment was carried out on grapefruit trees fertilized with composted sludge from Shiweitou Sewage Treatment Plant in Xiamen City of China, and a method was introduced of how to assess the environmental quality of grapefruit trees soil fertilized with sludge by Set Pair Analysis (SPA) model. The results showed that the soil in the surface layer (0-15cm) and the deeper layer (15-30cm) was less clean, and the environment of soil was not polluted. Thus it was feasible to use sludge as fruit fertilizer. The maximum service life of sludge for continuous land application was estimated by taking Cd as the limiting factor, which would provide scientific guide and technical support for safe land application of sludge.


Sign in / Sign up

Export Citation Format

Share Document