scholarly journals Assessment of a Turbo-Electric Aircraft Configuration with Aft-Propulsion Using Boundary Layer Ingestion

Aerospace ◽  
2019 ◽  
Vol 6 (12) ◽  
pp. 134 ◽  
Author(s):  
Rainer Schnell ◽  
Xin Zhao ◽  
Efthymios Rallis ◽  
Mavroudis Kavvalos ◽  
Smruti Sahoo ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Electric Propulsion ◽  
Engine Performance ◽  
Performance Model ◽  
Performance Characteristics ◽  
Accurate Description ◽  
Streamline Curvature ◽  
Enhanced Sensitivity ◽  
Trade Study ◽  
Streamline Curvature Method

In this paper, a turbo-electric propulsion system was analyzed, and its performance was assessed. The aircraft considered here was a single-aisle, medium-range configuration targeting a capacity of 150 Pax. The propulsion concept comprised two boosted geared turbofan engines mounted under-wing. Those main engines were supported by an electrically driven aft-propulsor contributing to the thrust generation and by taking advantage of ingesting the boundary layer of the fuselage for potentially higher levels of propulsive efficiency and allowing for the improved operation of the main engines. The performance assessment as carried out in the context of this paper involved different levels: Firstly, based on the reference aircraft and the detailed description of its major components, the engine performance model for both main engines, as well as for the electrically driven aft-propulsor was set up. The methodology, as introduced, has already been applied in the context of hybrid-electric propulsion and allowed for the aforementioned aircraft sizing, as well as the subsequent gas turbine multi-point synthesis (simulation). A geared turbofan architecture with 2035 technology assumptions was considered for the main engine configuration. The present trade study focused on the design and performance analysis of the aft-propulsor and how it affected the performance of the main engines, due to the electric power generation. In order to allow for a more accurate description of the performance of this particular module, the enhanced streamline curvature method with an underlying and pre-optimized profile database was used to design a propulsor tailored to meet the requirements of the aft propulsor as derived from the cycle synthesis and overall aircraft specification; existing design expertise for novel and highly integrated propulsors could be taken advantage of herein. The resulting performance characteristics from the streamline curvature method were then fed back to the engine performance model in a closely coupled approach in order to have a more accurate description of the module behavior. This direct coupling allowed for enhanced sensitivity studies, monitoring different top-level parameters, such as the thrust/power split between the main engines and the aft propulsor. As a result, different propulsor specifications and fan designs with optimal performance characteristics were achieved, which in return affected the performance of all subsystems considered.

scholarly journals Computational Study of the Propeller Position Effects in Wing-Mounted, Distributed Electric Propulsion with Boundary Layer Ingestion in a 25 kg Remotely Piloted Aircraft

Drones ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 56
Author(s):  
José Serrano Cruz ◽  
Andrés Tiseira ◽  
Luis García-Cuevas ◽  
Pau Varela
Keyword(s):  
Boundary Layer ◽  
Electric Propulsion ◽  
Computational Study ◽  
Bending Moment ◽  
Vertical Position ◽  
Position Effects ◽  
Foreign Object Damage ◽  
Trade Offs ◽  
Remotely Piloted Aircraft ◽  
Interesting Approach

Distributed electric propulsion and boundary layer ingestion are two attractive technologies to reduce the power consumption of fixed wing aircraft. Through careful distribution of the propulsive system elements, higher aerodynamic and propulsive efficiency can be achieved, as well as a lower risk of total loss of aircraft due to foreign object damage. When used on the wing, further reductions of the bending moment on the wing root can even lead to reductions of its structural weight, thus mitigating the expected increase of operating empty weight due to the extra components needed. While coupling these technologies in fixed-wing aircraft is being actively studied in the big aircraft segment, it is also an interesting approach for increasing the efficiency even for aircraft with maximum take-off masses as low as 25 kg, such as the A3 open subcategory for civil drones from EASA. This paper studies the effect of changing the propellers’ position in the aerodynamic performance parameters of a distributed electric propulsion with boundary layer ingestion system in a 25 kg fixed-wing aircraft, as well as in the performance of the propellers. The computational results show the trade-offs between the aerodynamic efficiency and the propeller efficiency when the vertical position is varied.

Effect of Manufacturing Variability on Turbine Engine Performance: A Probabilistic Study

2013 ◽  
Author(s):  
Michael Gorelik ◽  
Jacob Obayomi ◽  
Jack Slovisky ◽  
Dan Frias ◽  
Howie Swanson ◽  
...  
Keyword(s):  
Performance Metrics ◽  
Model Development ◽  
Engine Performance ◽  
Performance Model ◽  
Probabilistic Methods ◽  
System Level ◽  
Turbine Engine ◽  
Probabilistic Study ◽  
Blade Geometry

While turbine engine Original Equipment Manufacturers (OEMs) accumulated significant experience in the application of probabilistic methods (PM) and uncertainty quantification (UQ) methods to specific technical disciplines and engine components, experience with system-level PM applications has been limited. To demonstrate the feasibility and benefits of an integrated PM-based system, a numerical case study has been developed around the Honeywell turbine engine application. The case study uses experimental observations of engine performance such as horsepower and fuel flow from a population of engines. Due to manufacturing variability, there are unit-to-unit and supplier-to-supplier variations in compressor blade geometry. Blade inspection data are available for the characterization of these geometric variations, and CFD analysis can be linked to the engine performance model, so that the effect of blade geometry variation on system-level performance characteristics can be quantified. Other elements of the case study included the use of engine performance and blade geometry data to perform Bayesian updating of the model inputs, such as efficiency adders and turbine tip clearances. A probabilistic engine performance model was developed, system-level sensitivity analysis performed, and the predicted distribution of engine performance metrics was calibrated against the observed distributions. This paper describes the model development approach and key simulation results. The benefits of using PM and UQ methods in the system-level framework are discussed. This case study was developed under Defense Advanced Research Projects Agency (DARPA) funding which is gratefully acknowledged.

A Streamline Curvature Method for Calculating S1 Stream Surface Flow

1984 ◽  
Vol 106 (2) ◽  
pp. 306-312
Author(s):  
S. K. Mao ◽  
D. T. Li
Keyword(s):  
Surface Flow ◽  
Approximation Technique ◽  
Flow Section ◽  
Boolean Expression ◽  
Simple Method ◽  
Stream Surface ◽  
Streamline Curvature ◽  
Calculation Results ◽  
Good Agreement ◽  
Streamline Curvature Method

A streamline curvature method for calculating S1 surface flow in turbines is presented. The authors propose a simple method in which a domain of calculation can be changed into an orderly rectangle without making coordinate transformations. Calculation results obtained on subsonic and transonic turbine cascades have been compared with those of experiment and another theory. Good agreement has been found. When calculating blade-to-blade flow velocity at subsonic speed, a function approximation technique can be used in lieu of iteration method in order to reduce calculation time. If the calculated flow section is of a mixed (subsonic-supersonic) flow type, a Boolean expression obtained from the truth table of flow states is proposed to judge the integrated character of the mixed flow section. Similarly, another Boolean expression is used to determine whether there exists a “choking” of the relevant section. Periodical conditions are satisfied by iterating the first-order derivative of stagnation streamline, which is formed simultaneously. It can be proved that the stagnation streamline formed in this way is unique.

Modeling of Discrete Tip Injection in a Two-Dimensional Streamline Curvature Method

2012 ◽  
Author(s):  
Roland Matzgeller ◽  
Richard Pichler
Keyword(s):  
Rotating Stall ◽  
Streamline Curvature ◽  
Measurement Results ◽  
Compressor Design ◽  
Multistage Compressor ◽  
Physical Effects ◽  
Tip Injection ◽  
Stability Enhancement ◽  
Good Agreement ◽  
Streamline Curvature Method

Fluid injection at the tip of highly loaded compressor rotors is known to be effective in suppressing the onset of rotating stall and eventually compressor instability. However, using such stability enhancement methods in a multistage compressor might not only stabilize certain stages but has also an impact on radial and axial matching. In order to account for tip injection during the early stages of compressor design, this paper focuses on the development of a method to model the physical effects underlying tip injection within a streamline curvature method. With the help of system identification it could be shown that a rotor subject to the discrete jets of tip injection adapts to the varying flow conditions according to a first order model. This information was used to generate a time-dependent input for the steady equations used with a streamline curvature method and eventually to model the unsteady response of the rotor to tip injection. Comparing the results obtained with the enhanced streamline curvature model to measurement results, good agreement could be shown which raised confidence that the influence of tip injection on axial and radial matching was sufficiently captured.

The WLTC vs NEDC: A Case Study on the Impacts of Driving Cycle on Engine Performance and Fuel Consumption

2021 ◽  
Vol 18 (3) ◽  
pp. 9071-9081
Author(s):  
Jakub Lasocki
Keyword(s):  
Fuel Consumption ◽  
Combustion Engine ◽  
Engine Performance ◽  
Driving Cycle ◽  
Performance Characteristics ◽  
Pollutant Emission ◽  
Strong Impact ◽  
Light Duty ◽  
Light Duty Vehicles

The World-wide harmonised Light-duty Test Cycle (WLTC) was developed internationally for the determination of pollutant emission and fuel consumption from combustion engines of light-duty vehicles. It replaced the New European Driving Cycle (NEDC) used in the European Union (EU) for type-approval testing purposes. This paper presents an extensive comparison of the WLTC and NEDC. The main specifications of both driving cycles are provided, and their advantages and limitations are analysed. The WLTC, compared to the NEDC, is more dynamic, covers a broader spectrum of engine working states and is more realistic in simulating typical real-world driving conditions. The expected impact of the WLTC on vehicle engine performance characteristics is discussed. It is further illustrated by a case study on two light-duty vehicles tested in the WLTC and NEDC. Findings from the investigation demonstrated that the driving cycle has a strong impact on the performance characteristics of the vehicle combustion engine. For the vehicles tested, the average engine speed, engine torque and fuel flow rate measured over the WLTC are higher than those measured over the NEDC. The opposite trend is observed in terms of fuel economy (expressed in l/100 km); the first vehicle achieved a 9% reduction, while the second – a 3% increase when switching from NEDC to WLTC. Several factors potentially contributing to this discrepancy have been pointed out. The implementation of the WLTC in the EU will force vehicle manufacturers to optimise engine control strategy according to the operating range of the new driving cycle.

Adaptation Application to Engine Modelling

2007 ◽  
Author(s):  
Jude Iyinbor
Keyword(s):  
Measurement Data ◽  
Engine Performance ◽  
Performance Model ◽  
Operating Conditions ◽  
Adaptation Process ◽  
Design Point ◽  
Component Map ◽  
Important Measurement ◽  
Unknown Component ◽  
Selection Of

The optimisation of engine performance by predictive means can help save cost and reduce environmental pollution. This can be achieved by developing a performance model which depicts the operating conditions of a given engine. Such models can also be used for diagnostic and prognostic purposes. Creating such models requires a method that can cope with the lack of component parameters and some important measurement data. This kind of method is said to be adaptive since it predicts unknown component parameters that match available target measurement data. In this paper an industrial aeroderivative gas turbine has been modelled at design and off-design points using an adaptation approach. At design point, a sensitivity analysis has been used to evaluate the relationships between the available target performance parameters and the unknown component parameters. This ensured the proper selection of parameters for the adaptation process which led to a minimisation of the adaptation error and a comprehensive prediction of the unknown component and available target parameters. At off-design point, the adaptation process predicted component map scaling factors necessary to match available off-design point performance data.

Development and Integration of Rain Ingestion Effects in Engine Performance Simulations

2014 ◽  
Vol 137 (4) ◽  
Author(s):  
I. Roumeliotis ◽  
A. Alexiou ◽  
N. Aretakis ◽  
G. Sieros ◽  
K. Mathioudakis
Keyword(s):  
Engine Performance ◽  
Velocity Slip ◽  
Droplet Surface ◽  
Performance Model ◽  
Droplet Breakup ◽  
Test Case ◽  
Case Scenario ◽  
Worst Case ◽  
Engine Model ◽  
Component Models

Rain ingestion can significantly affect the performance and operability of gas turbine aero-engines. In order to study and understand rain ingestion phenomena at engine level, a performance model is required that integrates component models capable of simulating the physics of rain ingestion. The current work provides, for the first time in the open literature, information about the setup of a mixed-fidelity engine model suitable for rain ingestion simulation and corresponding overall engine performance results. Such a model can initially support an analysis of rain ingestion during the predesign phase of engine development. Once components and engine models are validated and calibrated versus experimental data, they can then be used to support certification tests, the extrapolation of ground test results to altitude conditions, the evaluation of control or engine hardware improvements and eventually the investigation of in-flight events. In the present paper, component models of various levels of fidelity are first described. These models account for the scoop effect at engine inlet, the fan effect and the effects of water presence in the operation and performance of the compressors and the combustor. Phenomena such as velocity slip between the liquid and gaseous phases, droplet breakup, droplet–surface interaction, droplet and film evaporation as well as compressor stages rematching due to evaporation are included in the calculations. Water ingestion influences the operation of the components and their matching, so in order to simulate rain ingestion at engine level, a suitable multifidelity engine model has been developed in the Proosis simulation platform. The engine model's architecture is discussed, and a generic high bypass turbofan is selected as a demonstration test case engine. The analysis of rain ingestion effects on engine performance and operability is performed for the worst case scenario, with respect to the water quantity entering the engine. The results indicate that rain ingestion has a strong negative effect on high-pressure compressor surge margin, fuel consumption, and combustor efficiency, while more than half of the water entering the core is expected to remain unevaporated and reach the combustor in the form of film.

Comparison and Synthesis of Performance and Aerodynamic Modeling of a Pass-Off Turbofan Engine Test Cell

2015 ◽  
Author(s):  
Martin Marx ◽  
Michael Kotulla ◽  
André Kando ◽  
Stephan Staudacher
Keyword(s):  
Research Effort ◽  
Engine Performance ◽  
Cell System ◽  
Performance Model ◽  
Test Cell ◽  
Test Facility ◽  
Engine Test ◽  
Combined System ◽  
Installation Effects ◽  
Engine Testing

To ensure the quality standards in engine testing, a growing research effort is put into the modeling of full engine test cell systems. A detailed understanding of the performance of the combined system, engine and test cell, is necessary e.g. to assess test cell modifications or to identify the influence of test cell installation effects on engine performance. This study aims to give solutions on how such a combined engine and test cell system can be effectively modeled and validated in the light of maximized test cell observability with minimum instrumentation and computational requirements. An aero-thermodynamic performance model and a CFD model are created for the Fan-Engine Pass-Off Test Facility at MTU Maintenance Berlin-Brandenburg GmbH, representing a W-shape configuration, indoor Fan-Engine test cell. Both models are adjusted and validated against each other and against test cell instrumentation. A fast-computing performance model is delivering global parameters, whereas a highly-detailed aerodynamic simulation is established for modeling component characteristics. A multi-disciplinary synthesis of both approaches can be used to optimize each of the specific models by calibration, optimized boundary conditions etc. This will result in optimized models, which, in combination, can be used to assess the respective design and operational requirements.

Analysis of Effect of Advanced Technique Configurations on Overall Performance of High Bypass Turbofan Engine

2014 ◽  
Author(s):  
Liu Jian Jun
Keyword(s):  
Air Flow ◽  
Engine Performance ◽  
Performance Model ◽  
Direct Drive ◽  
Nozzle Throat ◽  
Advanced Technique ◽  
Turbofan Engine ◽  
Overall Performance ◽  
Cooling Air Flow ◽  
Cooling Air

An analytical study was undertaken using the performance model of a two spool direct drive high BPR 300kN thrust turbofan engine, to investigate the effects of advanced configurations on overall engine performance. These include variable bypass nozzle, variable cooling air flow and more electric technique. For variable bypass nozzle, analysis on performance of outer fan at different conditions indicates that different operating points cannot meet optimal performance at the same time if the bypass nozzle area kept a constant. By changing bypass nozzle throat area at different states, outer fan operating point moves to the location where airflow and efficiency are more appropriate, and have enough margin away from surge line. As a result, the range of variable area of bypass nozzle throat is determined which ensures engine having a low SFC and adequate stability. For variable cooling airflow, configuration of turbine cooling air flow extraction and methodology for obtaining change of cooling airflow are investigated. Then, base on temperature analysis of turbine vane and blade and resistance of cooling airflow, reduction of cooling airflow is determined. Finally, using performance model which considering effect of cooling air flow on work and efficiency of turbine, variable cooling airflow effect on overall performance is analyzed. For more electric technique, the main characteristic is to use power off-take instead of overboard air extraction. Power off-take and air extraction effect on overall performance of high bypass turbofan engine is compared. Investigation demonstrates that power offtake will have less SFC.

Sign in / Sign up

Export Citation Format

Share Document