scholarly journals Effect of various surface treatment procedures on shear bond strength of stainless-steel orthodontic brackets to composite resin

2018 ◽  
Vol 18 (1) ◽  
pp. 21-30 ◽  
Author(s):  
Bayan Hassan
Keyword(s):  
Stainless Steel ◽  
Bond Strength ◽  
Surface Treatment ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Orthodontic Brackets ◽  
Treatment Procedures

scholarly journals Impact of Intracoronal Dentin Treatment Prior to Bleaching on Bond Strength of Restorative Materials

2014 ◽  
Vol 25 (6) ◽  
pp. 519-523 ◽  
Author(s):  
Erica Moreno Zanconato-Carvalho ◽  
João Felipe Bruniera ◽  
Natália Spadini de Faria ◽  
Vivian Colucci ◽  
Danielle Cristine Messias
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Surface Treatment ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Er:Yag Laser ◽  
Composite Resins ◽  
Bleaching Procedure ◽  
Significant Difference ◽  
Restorative Materials

Surface treatment of dentin before the bleaching procedure may affect its permeability and influence the bond strength of restorative materials. This study evaluated the influence of surface treatment before the bleaching on shear bond strength (SBT) of restorative materials to intracoronal dentin. Dentin slabs were subjected to surface treatment: no bleaching (control - CON), no surface treatment + bleaching (HP), 37% phosphoric acid + bleaching (PA) and Er:YAG laser + bleaching (L). After the bleaching procedure, specimens (n=10) were restored with: microhybrid composite resin (MH), flowable composite resin (F), and resin-modified glass-ionomer cement (RMGIC). The shear test was carried out. ANOVA and Tukey's test (α=0.05) showed significant difference for surface treatment and restorative materials (p<0.05). CON presented higher STB and was statistically different from HP (p<0.05). PA and L showed intermediate values and were statistically similar to CON and HP (p>0.05). STB for MH and F were higher than RMGIC (p<0.05), and did not differ from each other (p>0.05). The surface treatments with phosphoric acid and Er:YAG laser before the bleaching procedure provided shear bond strength at the same level of unbleached dentin and the composite resins presented superior bond strength to the intracoronal dentin.

scholarly journals Effect of surface treatment of prefabricated teeth on shear bond strength of orthodontic brackets

2017 ◽  
Vol 22 (4) ◽  
pp. 47-52 ◽  
Author(s):  
Marina Cumerlato ◽  
Eduardo Martinelli de Lima ◽  
Leandro Berni Osorio ◽  
Eduardo Gonçalves Mota ◽  
Luciane Macedo de Menezes ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Surface Treatments ◽  
Orthodontic Brackets ◽  
Positive Correlation ◽  
Diamond Bur ◽  
Group 2 ◽  
Group 1

ABSTRACT Objective: The aim of this in vitro study was to evaluate and compare the effects of grinding, drilling, sandblasting, and ageing prefabricated teeth (PfT) on the shear bond strength (SBS) of orthodontic brackets, as well as the effects of surface treatments on the adhesive remnant index (ARI). Methods: One-hundred-ninety-two PfT were divided into four groups (n = 48): Group 1, no surface treatment was done; Group 2, grinding was performed with a cylindrical diamond bur; Group 3, two drillings were done with a spherical diamond bur; Group 4, sandblasting was performed with 50-µm aluminum oxide. Before the experiment, half of the samples stayed immersed in distilled water at 37oC for 90 days. Brackets were bonded with Transbond XT and shear strength tests were carried out using a universal testing machine. SBS were compared by surface treatment and by ageing with two-way ANOVA, followed by Tukey’s test. ARI scores were compared between surface treatments with Kruskal-Wallis test followed by Dunn’s test. Results: Surface treatments on PfT enhanced SBS of brackets (p< 0.01), result not observed with ageing (p= 0.45). Groups II, III, and IV showed higher SBS and greater ARI than the Group 1 (p< 0.05). SBS was greater in the groups 3 and 4 (drilling, sandblasting) than in the Group 2 (grinding) (p< 0.05). SBS and ARI showed a positive correlation (Spearman’s R2= 0.57; p< 0.05). Conclusion: Surface treatment on PfT enhanced SBS of brackets, however ageing did not show any relevance. Sandblasting and drilling showed greater SBS than grinding. There was a positive correlation between SBS and ARI.

The impact of recycling and repeated recycling on shear bond strength of stainless steel orthodontic brackets

2013 ◽  
Vol 72 (1) ◽  
pp. 16-22 ◽  
Author(s):  
Faisal Ismail Bahnasi ◽  
Aida Nur Ashikin Abd Rahman ◽  
Mohamed Ibrahim Abu-Hassan
Keyword(s):  
Stainless Steel ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Orthodontic Brackets ◽  
The Impact

scholarly journals Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations

2014 ◽  
Vol 84 (4) ◽  
pp. 649-655 ◽  
Author(s):  
Youssef S. Al Jabbari ◽  
Sara M. Al Taweel ◽  
Mohammed Al Rifaiy ◽  
Mohammed Q. Alqahtani ◽  
Theodoros Koutsoukis ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Shear Bond Strength ◽  
Artificial Aging ◽  
Orthodontic Brackets

scholarly journals Influence of surface treatment on shear bond strength of orthodontic brackets

2013 ◽  
Vol 18 (3) ◽  
pp. 54-62 ◽  
Author(s):  
Ione Helena Vieira Portella Brunharo ◽  
Daniel Jogaib Fernandes ◽  
Mauro Sayão de Miranda ◽  
Flavia Artese
Keyword(s):  
Bond Strength ◽  
Aluminum Oxide ◽  
Sodium Bicarbonate ◽  
Surface Treatment ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Orthodontic Brackets ◽  
Treatment Methods ◽  
Hybrid Resin

INTRODUCTION: The shear bond strength of orthodontic brackets bonded to micro-hybrid and micro-particulate resins under different surface treatment methods was assessed. METHODS: Two hundred and eighty test samples were divided into 28 groups (n = 10), where 140 specimens were filled with Durafill micro-particulate resin and 140 with Charisma composite. In 140 samples, a coupling agent (silane) was applied. The surface treatment methods were: Phosphoric and hydrofluoric acid etching, sodium bicarbonate and aluminum oxide blasting, stone and burs. A Universal Instron Machine was used to apply an occlusal shear force directly to the resin composite bracket surface at a speed of 0.5 mm/min. The means were compared using analysis of variance and multivariate regression to assess the interaction between composites and surface treatment methods. RESULTS: Means and standard deviations for the groups were: Sodium bicarbonate jet 11.27±2.78; burs 9.26±3.01; stone 7.95±3.67; aluminum oxide blasting 7.04±3.21; phosphoric acid 5.82±1.90; hydrofluoric acid 4.54±2.87, and without treatment 2.75±1.49. An increase of 1.94 MPa in shear bond strength was seen in Charisma groups. Silane agent application reduced the Charisma shear bond strength by 0.68 Mpa, but increased Durafill means for bicarbonate blasting (0.83), burs (0.98) and stone drilling (0.46). CONCLUSION: The sodium bicarbonate blasting, burs and stone drilling methods produced adequate shear bond strength and may be suitable for clinical use. The Charisma micro hybrid resin composite showed higher shear bond means than Durafill micro particle composite.

Sign in / Sign up

Export Citation Format

Share Document