scholarly journals Simulation of Heavy 0il Production using Inflow Control Devices - A Comparison between the Nozzle Inflow Control Device and Autonomous Inflow Control Device

2018 ◽  
Author(s):  
Emmanuel Okoye ◽  
Britt M. E. Moldestad
Keyword(s):  
Control Device ◽  
Control Devices ◽  
Inflow Control Device

scholarly journals Research of inflow control devices for estimation of application in intellectual well

2021 ◽  
pp. 201-209
Author(s):  
R. A. Ismakov ◽  
◽  
E. V. Denisova ◽  
S. P. Sidorov ◽  
M. A. Chernikova ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Horizontal Wells ◽  
Control Device ◽  
Gas Production ◽  
Vertical Wells ◽  
Oil And Gas Production ◽  
Urgent Task ◽  
Measurement Devices ◽  
Control Devices ◽  
Inflow Control Device

Ensuring the completeness of oil and gas production from the subsoil by using modern techniques and technologies for controlling the inflow into the well is an urgent task, especially for wells with long horizontal ends. Inflow control devices (ICD), used in conjunction with packers and downhole measurement devices, are part of such systems, covered by the concept of «smart well». In general, such systems make it possible to control the inflow (flow rate) in individual intervals of horizontal wells or in vertical wells of multilayer fields while operating simultaneously in order to optimize production without additional downhole operations in real time. Keywords: inflow control device; horizontal well; intelligent well.

From Completion Design to Efficiency Analysis of Inflow Control Device: Comprehensive Approach for AICD Implementation for Thin Oil Rim Field Development Efficiency Improvement

2021 ◽  
Author(s):  
Timur Solovyev ◽  
Nikolay Mikhaylov
Keyword(s):  
Control Device ◽  
Sand Production ◽  
Field Development ◽  
Heterogeneous Reservoirs ◽  
Well Completion ◽  
Well Integrity ◽  
Control Devices ◽  
Inflow Control Device ◽  
Log Interpretation ◽  
Oil Rim

Abstract The complex interbedded heterogeneous reservoirs of the Severo-Komsomolskoye field are developed by horizontal wells in which, as part of the pilot project's scope, autonomous inflow control devices (AICD) are installed to prevent early coning and gas breakthroughs in long horizontal sections and reduce sand production, which is a problem aggravated by an extremely low mechanical strength of the terrigenous deposits occurring in the Pokur formation of the Cenomanian stage in this area. The zones produced through AICDs are separated by swell packers. The issue of AICD effectiveness is discussed in the publications by Solovyev (2019), Shestov (2015), Byakov (2019) and some others. One of the methods used for monitoring horizontal sections with AICDs is production logging (PLT). However, due to the complexity of logging objectives, the use of conventional logging techniques makes the PLT unfeasible, considering the costs of preparing and carrying out the downhole operations. This paper provides some case studies of the Through-Barrier Diagnostics application, including passive spectral acoustics (spectral acoustic logging) and thermohydrodynamic modelling for the purpose of effective estimation of reservoir flows behind the liner with AICDs installed and well integrity diagnostics. As a result of the performed diagnostics, the well completion strategy was updated and optimised according to the log interpretation results, and one well intervention involving a cement squeeze with a straddle-packer assembly was carried out.

Flow performance of horizontal wells with inflow control devices

2004 ◽  
Vol 15 (4) ◽  
pp. 409-450 ◽  
Author(s):  
C. ATKINSON ◽  
F. MONMONT ◽  
A. F. ZAZOVSKY
Keyword(s):  
Single Phase ◽  
Singular Integrals ◽  
Boundary Integral Equations ◽  
Horizontal Wells ◽  
Control Device ◽  
Boundary Integral ◽  
One Dimensional ◽  
Anisotropic Reservoir ◽  
Control Devices ◽  
Inflow Control Device

This paper presents a powerful approximate method for modelling the steady single-phase flow into a horizontal well completed with an Inflow Control Device (ICD) in an anisotropic reservoir. Two types of problems are investigated: the forward problem, which allows the user to find the flux distribution along the wellbore for a specified pressure drawdown, and the inverse problem to determine the ICD properties when the flux or reservoir pressure drawdown along the wellbore is given. The method is based on structuring the flow patterns around and, inside the wellbore and across the ICD and on the reduction of the dimensionality of the problem by using boundary integral equations. The resulting one dimensional singular nonlinear integro-differential equation is solved numerically, using the appropriate quadrature formula for singular integrals with Cauchy kernels.

Active Helmholtz Resonator With Positive Real Impedance

2006 ◽  
Vol 129 (1) ◽  
pp. 94-100 ◽  
Author(s):  
Jing Yuan
Keyword(s):  
Noise Control ◽  
Helmholtz Resonator ◽  
Control Device ◽  
Positive Real ◽  
Noise Field ◽  
Strictly Positive Real ◽  
Control Devices ◽  
Passive Noise ◽  
Active Resonator ◽  
Electronic Resonance

The impedance of a passive noise control device is strictly positive real, if the device is installed in noise fields with weak mean flows. Passive noise control devices are, therefore, more reliable than active ones. Active control may be applied to a Helmholtz resonator to introduce electronic resonance. It will affect the impedance Zact of the resonator. A controller may be designed such that (a) Zact is small and resistive at some tunable frequencies; and (b) Re{Zact}⩾0 in the entire frequency range of interest. If criterion (a) is satisfied, the active resonator can suppress duct noise at tunable frequencies. It is difficult to design a controller to satisfy criterion (b) because parameters of the controller depend on acoustic parameters of the noise field. A new method is proposed here to design an active controller to meet both criteria simultaneously. The satisfaction of criterion (b) implies a positive real Zact and a robust active resonator with respect to parameter variation in the noise field. Experimental results are presented to verify the performance of the active resonator.

Innovative Washpipe Free Circulating ICD Delivers Reduced Well Construction Costs

2021 ◽  
Author(s):  
Zhihua Wang ◽  
Daniel Newton ◽  
Aqib Qureshi ◽  
Yoshito Uchiyama ◽  
Georgina Corona ◽  
...  
Keyword(s):  
United Arab Emirates ◽  
Drilling Fluid ◽  
Aqueous Fluid ◽  
Control Device ◽  
Lessons Learned ◽  
Innovative Technology ◽  
Well Performance ◽  
Construction Costs ◽  
Inflow Control Device ◽  
Testing Field

Abstract This Extended Reach Drilling (ERD) field re-development of a giant offshore field in the United Arab Emirates (UAE) requires in most cases extremely long laterals to reach the defined reservoir targets. However, certain areas of the field show permeability and / or pressure variations along the horizontal laterals. This heterogeneity requires an inflow control device (ICD) lower completion liner to deliver the required well performance that will adequately produce and sweep the reservoir. The ICD lower completion along with the extremely long laterals means significant time is spent switching the well from reservoir drilling fluid (RDF) non-aqueous fluid (NAF) to an aqueous completion brine. To reduce the amount of rig time spent on the displacement portion of the completion phase, an innovative technology was developed to enable the ICDs to be run in hole in a closed position and enable circulating through the end of the liner. The technology uses a dissolvable material, which is installed in the ICD to temporarily plug it. The dissolvable material is inert to the RDF NAF while the ICDs are run into hole, and then dissolves in brine after the well is displaced from RDF NAF to completion brine, changing the ICDs from closed to an open position. The ability to circulate through the end of the liner, with the support of the plugged ICDs, when the lower completion is deployed and at total depth (TD), enables switching the well from RDF NAF drilling fluid to an aqueous completion brine without the associated rig time of the original displacement method. The technique eliminates the use of a dedicated inner displacement string and allows for the displacement to be performed with the liner running string, saving 4-5 days per well. An added bonus is that the unique design allowed for this feature to be retrofitted to existing standard ICDs providing improved inventory control. In this paper the authors will demonstrate the technology and system developed to perform this operation, as well as the qualification testing, field installations, and lessons learned that were required to take this solution from concept to successful performance improvement initiative.

scholarly journals СИСТЕМА УПРАВЛЕНИЯ УСТРОЙСТВОМ КОНТРОЛЯ ПРИТОКА ФЛЮИДА В СКВАЖИНЕ

2019 ◽  
Vol 330 (11) ◽  
pp. 192-198
Author(s):  
Рустэм Адипович Исмаков ◽  
Екатерина Всеволодовна Денисова ◽  
Марина Алексеевна Черникова ◽  
Сергей Павлович Сидоров
Keyword(s):  
Control Valve ◽  
Control Device ◽  
Inflow Control Device

Актуальность исследования состоит в том, что решением преждевременного прорыва воды или газа в горизонтальной скважине из-за неоднородности профилей притока вдоль оси горизонтального ствола, является изменение пластового давления на различных участках, а также при разработке контактных месторождений, особенно по мере истощения залежи, могут служить устройства контроля притока флюида. Различают активные Interval Control Valve (ICV) или пассивные Inflow Control Device (ICD) устройства. Устройства ICD способны выровнять приток вдоль горизонтальной скважины за счет создания дополнительного сопротивления потоку жидкости, зависящего от величины притока на данном горизонтальном участке. Недостаток современных ICD в том, что они не имеют возможности регулирования и приведения пассивных устройств в действие после установки в стволе скважины. В связи с тем, что имеются риски связанные с неопределенностью в описании свойств пласта, которые присутствуют на всех стадиях разработки месторождения недостаток ICD оказывается существенным. Системы ICV приводятся в действие дистанционно с поверхности скважины, но не способны определять характер поступающего флюида (нефть, газ, вода) в скважину и принимать решение в автоматическом режиме. Цель: разработка новой конструктивной схемы устройства контроля притоком с возможностью непрерывного мониторинга характера поступающей жидкости, и программного обеспечения для управления клапаном с устья скважины. Объекты: горизонтальная скважина и устройство контроля притоком флюида. Методы: имитационное моделирование Simulink, нейронные сети, матричные методы, методы линеаризации нелинейных уравнений. Результаты. Предложена новая конструктивная схема устройства контроля притока в горизонтальной скважине, позволяющая непрерывно оценивать характер поступающего флюида. Данная конструкция позволяет в автоматическом режиме регулировать положение исполнительного механизма по данным измерительных приборов. Дано математическое описание работы клапана. Разработана модель клапана в среде моделирования Simulink, с использованием матричного подхода и нейронных сетей, для построения качественной зависимости положения клапана от значения создаваемого перепада давления. Приведены результаты работы блока нейронной сети и конечный результат моделирования.

Integrated Off-Bottom Cemented Inflow Control Device System Design Toward Well Delivery Optimization

2016 ◽  
Author(s):  
Mohammed A. Al Madan ◽  
Mazen Bu Khamseen ◽  
Hedy Suherdiana ◽  
Ahmad Al Abdulmohsen
Keyword(s):  
System Design ◽  
Control Device ◽  
Inflow Control Device
Sign in / Sign up

Export Citation Format

Share Document