ANALISA PERFORMANSI SPREAD SPECTRUM IMAGE STEGANOGRAPHY (SSIS) PADA KANAL MULTIPATH RAYLEIGH FADING

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
Chaeriah Ali Wael

Teknik SSIS menggunakan metode spread spectrum, dimana informasi yang akan disisipkan ke citra cover disebar ke dalam noise yang memiliki band frekuensi yang lebar. Noise inilah yang ditambahkan ke dalam citra cover. Sebagai antisipasi terjadi error selama proses transmisi, digunakan teknik Error Control Coding (ECC) yang terdiri dari enkoder konvolusi di transmitter dan dekoder yang menggunakan algoritma viterbi di receiver.Dari simulasi yang dilakukan, diketahui bahwa jumlah pesan maksimum yang dapat disisipkan pada citra cover dipengaruhi oleh ukuran citra cover, code rate kode konvolusi dan level kuantisasi. Pada penelitian ini, ukuran pesan maksimum yang dapat disisipkan ke citra cover sebesar 1755 Byte. Jika pesan yang disisipkan melebihi kapasitas maksimum maka akan berpengaruh pada kriteria imperceptibility citra stego yang dihasilkan. Karena ukuran teks yang disisipkan pada simulasi masih dibawah kapasitas maksimum, maka nilai MSE rata-rata citra stego yang diterima receiver cukup kecil yaitu sebesar 0.159 dB dan nilai PSNRnya cukup besar yaitu sebesar 56.114 dB walaupun pada kondisi SNR kanal sama dengan 10 dB. Kondisi kanal sangat berpengaruh terhadap kualitas citra stego yang dihasilkan. Semakin besar nilai SNR, kualitas citra stego pada receiver akan semakin baik.

Author(s):  
Reda Benkhouya ◽  
Idriss Chana ◽  
Youssef Hadi

Channel coding is commonly based on protecting information to be communicated across an unreliable medium, by adding patterns of redundancy into the transmission path. Also referred to as forward error control coding (FECC), the technique is widely used to enable correcting or at least detecting bit errors in digital communication systems. In this paper we study an original FECC known as polar coding which has proven to meet the typical use cases of the next generation mobile standard. This work is motivated by the suitability of polar codes for the new coming wireless era. Hence, we investigate the performance of polar codes in terms of bit error rate (BER) for several codeword lengths and code rates. We first perform a discrete search to find the best operating signal-to-noise ratio (SNR) at two different code rates, while varying the blocklength. We find in our extensive simulations that the BER becomes more sensitive to operating SNR (OSNR) as long as we increase the blocklength and code rate. Finally, we note that increasing blocklength achieves an SNR gain, while increasing code rate changes the OSNR domain. This trade-off sorted out must be taken into consideration while designing polar codes for high-throughput application.


Sign in / Sign up

Export Citation Format

Share Document