Process and Physical Metallurgical Developments for High-Performance Niobium-Containing Pressure Vessel Steel Plates

2021 ◽  
Author(s):  
S. Jansto
Keyword(s):  
Pressure Vessel ◽  
High Performance ◽  
Steel Plates ◽  
Pressure Vessel Steel ◽  
Vessel Steel

Effect of commercial cladding on the fracture behavior of pressure vessel steel plates

1989 ◽  
Vol 115 (2-3) ◽  
pp. 349-357 ◽  
Author(s):  
S.K. Iskander ◽  
D.J. Alexander ◽  
S.E. Bolt ◽  
K.V. Cook ◽  
W.R. Corwin ◽  
...  
Keyword(s):  
Pressure Vessel ◽  
Fracture Behavior ◽  
Steel Plates ◽  
Pressure Vessel Steel ◽  
Vessel Steel

scholarly journals Erratum: Čapek et al. On the Weldability of Thick P355NL1 Pressure Vessel Steel Plates Using Laser Welding. Materials 2021, 14, 131

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4598
Author(s):  
Jiří Čapek ◽  
Karel Trojan ◽  
Jan Kec ◽  
Ivo Černý ◽  
Nikolaj Ganev ◽  
...  
Keyword(s):  
Laser Welding ◽  
Pressure Vessel ◽  
Steel Plates ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Welding Materials

The authors would like to correct the sentence in the “Materials and Methods” section of their article [...]

Design and Manufacture of Welded Plate Specimens for Residual Stress Experiments

2008 ◽  
Author(s):  
P. R. Hurrell ◽  
K. Bridger ◽  
P. Bunney ◽  
C. Gill ◽  
J. A. Francis ◽  
...  
Keyword(s):  
Residual Stress ◽  
Mechanical Behaviour ◽  
Pressure Vessel ◽  
Ferritic Steel ◽  
Steel Plates ◽  
Welding Parameters ◽  
Pressure Vessel Steel ◽  
Welding Temperature ◽  
Vessel Steel ◽  
Steel Welds

A long-term UK research programme has been established in order to improve the understanding of thermo-mechanical behaviour and residual stresses generated in pressure vessel steel welds as well as developing finite element (FE) welding simulation methods. The production of representative test specimens is an important element of this research project, since quality measurement data are needed to validate FE models. This paper describes the design, development and manufacture of welded plate specimens used for residual stress (RS) experiments. To date, research has focused mainly on developing the understanding of SA508 pressure vessel steel welds. Specimen dimensions were selected to facilitate stress measurements using a range of techniques. The philosophy adopted was to start with relatively simple 1-pass weld specimens and gradually increase the complexity to multi-pass groove welds in plates. Simple 1-pass weld specimens were generally designed to investigate the effect of welding parameters on thermo-mechanical behaviour, such as heat-affected zone (HAZ) microstructures and phase transformations. Later specimens are more representative of multi-pass power plant welds. They are being used to study material thermal cyclic hardening/softening behaviour. Other issues of concern are also being investigated, such as the effect of restraint during welding on RS and the effectiveness of post weld heat treatment (PWHT). Specimens were also designed to study peak stresses arising at bead stop/start positions and whether such peak stresses are annealed in overlaying additional weld metal. These investigations were performed on multi-pass groove welds in both austenitic and ferritic steel plates. Practical issues encountered during welding trials are discussed, including plate distortion and magnetisation of the ferritic steel plates. Information is also provided about welding temperature measurements and metallurgical examinations.

scholarly journals On the Weldability of Thick P355NL1 Pressure Vessel Steel Plates Using Laser Welding

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 131
Author(s):  
Jiří Čapek ◽  
Karel Trojan ◽  
Jan Kec ◽  
Ivo Černý ◽  
Nikolaj Ganev ◽  
...  
Keyword(s):  
High Pressure ◽  
Laser Welding ◽  
Pressure Vessel ◽  
Mechanical Tests ◽  
Fatigue Tests ◽  
Steel Plates ◽  
Hazardous Substances ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Microstructural Parameters

Pipeline transport uses millions of kilometers of pipes worldwide to transport liquid or gas over long distances to the point of consumption. High demands are placed, especially on the transport of hazardous substances under high pressure (gas, oil, etc.). Mostly seamless steel pipes of various diameters are used, but their production is expensive. The use of laser-welded pipes could significantly reduce the cost of building new pipelines. However, sufficient mechanical properties need to be ensured for welded pipes to meet stringent requirements. Therefore, laser-welded 10 mm thick pressure vessel steel plates were subjected to various mechanical tests, including high-cycle fatigue tests. Furthermore, the microstructural parameters and the state of residual stresses were determined using X-ray and neutron diffraction, which could affect fatigue life, too. The critical areas for possible crack initialization, especially in and near the heat-affected zone, were found using different tests. The presented results outline the promising application potential of laser welding for the production of pipes for high-pressure pipelines.

PRESSURE VESSEL STEEL PLATES WITH IMPROVED WELDABILITY

1989 ◽  
pp. 1067-1074
Author(s):  
J. Furusawa ◽  
T. Kushida ◽  
S. Watanabe
Keyword(s):  
Pressure Vessel ◽  
Steel Plates ◽  
Pressure Vessel Steel ◽  
Vessel Steel

Dislocation structures in 16MND5 pressure vessel steel strained in uniaxial tension at −196°C

2005 ◽  
Vol 96 (8) ◽  
pp. 909-912
Author(s):  
Karel Obrtlík ◽  
Christian Robertson ◽  
Bernard Marini
Keyword(s):  
Uniaxial Tension ◽  
Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel
Sign in / Sign up

Export Citation Format

Share Document