scholarly journals Analysis of Laser Treated Copper Surfaces

2018 ◽  
Vol 47 (2) ◽  
pp. 140-145 ◽  
Author(s):  
József Hlinka ◽  
Zoltán Weltsch
Keyword(s):  
Optical Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Laser Power ◽  
Auger Electron ◽  
Beam Power ◽  
Power Parameter ◽  
Copper Surfaces ◽  
X Ray ◽  
Laser Beam Power

The effect of laser treatment on copper irradiated by a Nd:YAG laser was investigated by optical microscopy, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). Wettability measurements were taken previously on the laser treated samples and the results showed interesting changes. In this paper the surfaces of the copper samples were analyzed with optical microscopy, SEM, XPS and AES in four laser power parameter. The SEM observations demonstrate that in this laser beam power range the level of surface modification is not affected by the laser power. According to the XPS and AES results we can say that the measurements do not show exact connections between the oxidation state and the wettability of the laser treated surface.

Chromium implantation in silica glass

1996 ◽  
Vol 11 (1) ◽  
pp. 229-235 ◽  
Author(s):  
E. Cattaruzza ◽  
R. Bertoncello ◽  
F. Trivillin ◽  
P. Mazzoldi ◽  
G. Battaglin ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Photoelectron Spectroscopy ◽  
Silica Glass ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Secondary Ion Mass Spectrometry ◽  
Rutherford Backscattering Spectrometry ◽  
X Ray ◽  
Chromium Silicide ◽  
Secondary Ion

Silica glass was implanted with chromium at the energy of 35 and 160 keV and at fluences varying from 1 × 1016 to 11 × 1016 ions cm−2. In a set of chromium-implanted samples significant amounts of carbon were detected. Samples were characterized by x-ray photoelectron spectroscopy, x-ray-excited Auger electron spectroscopy, secondary ion mass spectrometry, and Rutherford backscattering spectrometry. Chromium silicide and chromium oxide compounds were observed; the presence of carbon in the implanted layers induces the further formation of chromium carbide species. Thermodynamic considerations applied to the investigated systems supply indications in agreement with the experimental evidences.

Comparative Study of Time-Dependent PAES and XPS on a Ni/Pd Surface

2017 ◽  
Vol 373 ◽  
pp. 313-316 ◽  
Author(s):  
Samantha Zimnik ◽  
Christian Piochacz ◽  
Sebastian Vohburger ◽  
Christoph Hugenschmidt
Keyword(s):  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Structural Changes ◽  
Time Dependent ◽  
Xps Analysis ◽  
Time Constants ◽  
X Ray ◽  
Residual Gas ◽  
Rule Out

We report on time-dependent Positron annihilation induced Auger Electron Spectroscopy (PAES) study on 0.5 monolayers (ML) Ni on polycrystalline Pd accompanied by complementary X-ray induced Photoelectron Spectroscopy (XPS). The normalized PAES spectra showed a significant decrease in the Ni intensity and an increase in the Pd intensity as a function of time. To rule out varying influence on the elements e.g. from surface contaminates due to the residual gas, a time-dependent XPS analysis was performed on pure Ni and Pd as well as to analyze the main contaminants C and O. The O fraction was found to be constant within the measurement time and the time constants for C significantly differ from those of Ni and Pd in the PAES data. Consequently, it was concluded that the PAES data show a superposition of C contamination and structural changes at the surface of Ni/Pd.

Sign in / Sign up

Export Citation Format

Share Document