scholarly journals On the Static Instability of Liquid Poppet Valves

2015 ◽  
Vol 59 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Csaba Bazsó ◽  
Csaba Hős
Keyword(s):  
Static Instability ◽  
Poppet Valves

Flow Coefficient Evaluation of Poppet Valves Used in Reciprocating Compressors for LDPE

2008 ◽  
Author(s):  
Enzo Giacomelli ◽  
Massimo Schiavone ◽  
Fabio Manfrone ◽  
Andrea Raggi
Keyword(s):  
Pressure Drop ◽  
Time Pressure ◽  
Experimental Tests ◽  
Operating Conditions ◽  
Flow Coefficient ◽  
Operating Life ◽  
High Fatigue ◽  
Strongly Connected ◽  
And Performance ◽  
Poppet Valves

Poppet valves have been used for a long time for very high pressure reciprocating compressors, as for example in the case of Low Density Polyethylene. These applications are very critical because the final pressure can reach 350 MPa and the evaluation of the performance of the machines is strongly connected to the proper operation and performance of the valve itself. The arrangement of cylinders requires generally a certain compactness of valve to withstand high fatigue stresses, but at the same time pressure drop and operating life are very important. In recent years the reliability of the machines has been improving over and over and the customers’ needs are very stringent. Therefore the use of poppet valves has been extended to other cases. In general the mentioned applications are heavy duty services and the simulation of the valves require some coefficients to be used in the differential equations, able to describe the movement of plate/disk or poppet and the flow and related pressure drop through the valves. Such coefficients are often determined in an experimental way in order to have a simulation closer to the real operating conditions. For the flow coefficients it is also possible today to use theoretical programs capable of determining the needed values in a quick and economical way. Some investigations have been carried out to determine the values for certain geometries of poppet valves. The results of the theory have been compared with some experimental tests. The good agreement between the various methods indicates the most suitable procedure to be applied in order to have reliable data. The advantage is evident as the time necessary for the theoretical procedure is faster and less expensive. This is of significant importance at the time of the design and also in case of a need to provide timely technical support for the operating behavior of the valves. Particularly for LDPE, the optimization of all the parameters is strongly necessary. The fatigue stresses of cylinder heads and valve bodies have to match in fact with gas passage turbulence and pressure drop, added to the mechanical behavior of the poppet valve components.

Static Instability of a Restrained Cantilever Column with a Tip Mass Subjected to a Subtangential Follower Force

2013 ◽  
Vol 345 ◽  
pp. 341-344
Author(s):  
Zhen Chao Su ◽  
Yan Xia Xue
Keyword(s):  
Differential Equation ◽  
Mass Parameter ◽  
Follower Force ◽  
Force Parameter ◽  
Euler Beam ◽  
Numerical Computations ◽  
Divergence Instability ◽  
Static Instability ◽  
Tip Mass

Based on the theory of Bernoulli-Euler beam, the differential equation of a restrained cantilever column with a tip mass subjected to a subtangential follower force is constructed, the solution of the differential equation is found, and the existence of regions of divergence instability of the system is discussed. The influence of the follower force parameter η, the tip mass parameter β and an end elastic end support on the divergence instability of the column is investigated. Several numerical computations of some cases have completed.

Passive Magnetic Bearings: Low Instability and Possible Stability

2005 ◽  
Author(s):  
R. Bassani ◽  
E. Ciulli
Keyword(s):  
Permanent Magnet ◽  
Magnetic Bearings ◽  
Static Instability ◽  
Static Conditions

Permanent magnet bearings and systems offer negligible friction and no wear, but static instability too. Nevertheless, spaces of low static instability exhist, and stability may be possible in non static conditions.

Paper 3: Steady Flow Tests on Twin Poppet Valves

1967 ◽  
Vol 182 (4) ◽  
pp. 126-133 ◽  
Author(s):  
W. A. Woods
Keyword(s):  
Steady Flow ◽  
Pressure Loss ◽  
Pressure Ratio ◽  
Effective Area ◽  
Valve Lift ◽  
Cylinder Wall ◽  
Large Area ◽  
Pressure Losses ◽  
Flow Through ◽  
Poppet Valves

This paper presents the results of an experimental investigation of steady flow through a pair of exhaust poppet valves. An account is given of the gas exchange process on engines which use poppet valves and the reason why pressure losses should be kept to a minimum is explained. Tests carried out on the cylinder head of a uniflow two-stroke cycle engine are described following a brief description of the apparatus used. The results of a simple analysis of incompressible flow are also given. It is shown that the two previous models of flow through a valve, namely the sudden enlargement and constant static pressure, both give unrealistic pressure losses for large area ratios, i.e. at high valve lifts. A new model is introduced which leads to realistic pressure losses at small and large area ratios, i.e. at low and high valve lifts. Effective areas for the present tests are calculated on the basis of the constant pressure model, and details of calculation of pressure losses are outlined. The blockage effect caused by placing the exhaust valves near the cylinder wall is given in the discussion of the test results. This is zero for 0 < l/d < 0·08, but reaches a maximum blockage of 10 per cent at l/d = 0·28. With unrestricted twin valves the effective area is about twice that of a single valve up to l/d = 0·18 with a progressively larger effective area at lifts up to 13 per cent higher at l/d = 0·4. A comparison is also made with other data readily available. The pressure losses determined from the tests were analysed using a parameter derived in the simple theory. The parameter used is found to be almost independent of pressure ratio and the results are presented by means of this pressure loss parameter as a function of valve lift. The representation provides a quantitative method of comparing the performance of a given configuration of valve and port. On this basis the twin poppet valves are shown to give a slightly higher pressure loss than a single valve.

Buckling of Risers in Tension due to Internal Pressure: Nonmovable Boundaries

1983 ◽  
Vol 105 (3) ◽  
pp. 277-281 ◽  
Author(s):  
M. M. Bernitsas ◽  
T. Kokkinis
Keyword(s):  
Internal Pressure ◽  
Fluid Pressure ◽  
Critical Length ◽  
Entire Length ◽  
Tubular Columns ◽  
Internal Fluid ◽  
Static Instability

Open-ended tubular columns may buckle globally as Euler columns due to the action of internal fluid pressure even while they are in tension along their entire length. Hydraulic columns, marine drilling and production risers are, therefore, prone to such static instability. This paper explains this phenomenon, defines the critical riser length for which this instability may occur and provides graphs with values of the critical length which can readily be used for design purposes. Risers with nonmovable boundaries are considered; namely, hinged-hinged, clamped-hinged, hinged-clamped and clamped-clamped risers.

Sign in / Sign up

Export Citation Format

Share Document