scholarly journals Analysis of the Impact of the Fireplace Heating on the Energy Performance of the Family House

2020 ◽  
Vol 64 (2) ◽  
pp. 145-149
Author(s):  
Rastislav Ingeli ◽  
Peter Buday
Keyword(s):  
Energy Efficient ◽  
Energy Use ◽  
Energy Performance ◽  
Building Envelope ◽  
Cold Climate ◽  
Hot Water ◽  
Energy Class ◽  
Main Concern ◽  
Technical Equipment ◽  
The Impact

Reduction of energy use in buildings is an important measure to achieve climate changes of mitigation. It is essential to minimize heat losses when designing energy efficient buildings. For energy efficient building in a cold climate, a large part of the space heating demand is caused by transmission losses through the building envelope. In compliance with the today's trend of designing sustainable and energy-saving architecture, it is necessary firstly to solve the factors influencing the energy balance. This year the subsidy for houses has been valued at € 8,000. The condition is that the building is classified in the energy class A0 according to the Energy Performance Act. Energy class A0 characterizes nearly zero energy buildings. The main concern is for the public to become interested in such buildings. The subsidy is designed to reward and promote those buildings that their heat and technical characteristics and modern technical equipment that meet energy class. In addition to a good plan to raise the profile of such buildings, there has been a lot of speculation to help make buildings in energy class A0. They are mainly owners of family houses where there is no gasification and are forced to have electricity as a source of heat and hot water. Electricity has a high primary energy factor, which means that buildings do not have to be approved.

scholarly journals Toward efficient energy consumption in middle income housing buildings in Egypt

2020 ◽  
Vol 15 (2) ◽  
pp. 180-189
Author(s):  
Ibrahim Rizk Hegazy
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Use ◽  
Energy Analysis ◽  
Weather Conditions ◽  
Energy Performance ◽  
Middle Income ◽  
Efficient Energy ◽  
Hot Weather ◽  
The Impact

Abstract Current research pays special attention to the application of approaches that promote sustainable design in a built environment and ensure energy efficiency. In this context, the form of housing buildings is an important parameter that has a meaningful impact on the use of energy in housing buildings. Hence, this research attempts to study the impact of the form of housing buildings on energy efficiency taking into account the mid-hot weather conditions in one of the middle-income housing buildings in new communities in Egypt. To achieve the research aim, a comparative analysis is carried out using parametric numerical analysis—DesignBuilder energy analysis—to compare the various hypothetical proposals for different building configurations. The study determines that the efficiency of energy use in buildings depends to a large extent on their forms that will help urban designers and planners to propose the best energy performance in the form of housing buildings in the stage of conceptual design suitable for other environmental, social and economic urban planning issues. These results should be incorporated into the building codes adopted in Egypt’s new cities in order to reach more energy-efficient housing buildings in Egypt.

scholarly journals Upgrading the Smartness of Retrofitting Packages towards Energy-Efficient Residential Buildings in Cold Climate Countries: Two Case Studies

Buildings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 200 ◽  
Author(s):  
Laurina C. Felius ◽  
Mohamed Hamdy ◽  
Fredrik Dessen ◽  
Bozena Dorota Hrynyszyn
Keyword(s):  
Thermal Comfort ◽  
Life Cycle Cost ◽  
Energy Savings ◽  
Residential Buildings ◽  
Cost Effective ◽  
Energy Performance ◽  
Building Envelope ◽  
Heat Losses ◽  
Cold Climate ◽  
The Impact

Improving the energy efficiency of existing buildings by implementing building automation control strategies (BACS) besides building envelope and energy system retrofitting has been recommended by the Energy Performance of Buildings Directive (EPBD) 2018. This paper investigated this recommendation by conducting a simulation-based optimization to explore cost-effective retrofitting combinations of building envelope, energy systems and BACS measures in-line with automation standard EN 15232. Two cases (i.e., a typical single-family house and apartment block) were modeled and simulated using IDA Indoor Climate and Energy (IDA-ICE). The built-in optimization tool, GenOpt, was used to minimize energy consumption as the single objective function. The associated difference in life cycle cost, compared to the reference design, was calculated for each optimization iteration. Thermal comfort of the optimized solutions was assessed to verify the thermal comfort acceptability. Installing an air source heat pump had a greater energy-saving potential than reducing heat losses through the building envelope. Implementing BACS achieved cost-effective energy savings up to 24%. Energy savings up to 57% were estimated when BACS was combined with the other retrofitting measures. Particularly for compact buildings, where the potential of reducing heat losses through the envelope is limited, the impact of BACS increased. BACS also improved the thermal comfort.

Design and Performance of the Van Geet Off-Grid Home

2004 ◽  
Vol 126 (2) ◽  
pp. 738-743 ◽  
Author(s):  
C. Dennis Barley ◽  
Paul Torcellini ◽  
Otto Van Geet
Keyword(s):  
Computer Simulation ◽  
Energy Efficient ◽  
Performance Monitoring ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Hot Water ◽  
Domestic Water ◽  
Heating And Cooling ◽  
And Performance

The Van Geet home near Denver, Colorado, demonstrates the successful integration of energy conservation measures and renewable energy supply in a beautiful, comfortable, energy-efficient, 295-m23,176-ft2 off-grid home in a cold, sunny climate. Features include a tight envelope, energy-efficient appliances, passive solar heating (direct gain and Trombe wall), natural cooling, solar hot water, and photovoltaics. In addition to describing this house and its performance, this paper describes the recommended design process of (1) setting a goal for energy efficiency at the outset, (2) applying rules of thumb, and (3) using computer simulation to fine-tune the design. Performance monitoring and computer simulation are combined for the best possible analysis of energy performance. In this case, energy savings are estimated as 89% heating and cooling (compared to 95 MEC), 83% electrical, and nearly 100% domestic water heating. The heating and cooling energy use is 8.96kJ/°Cs˙days˙m20.44Btu/°Fs˙days˙ft2.

scholarly journals Airtightness and Heat Energy Loss of Mid-Size Terraced Houses Built of Different Construction Materials

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6367
Author(s):  
Valdas Paukštys ◽  
Gintaris Cinelis ◽  
Jūratė Mockienė ◽  
Mindaugas Daukšys
Keyword(s):  
Energy Loss ◽  
Energy Use ◽  
Construction Materials ◽  
Energy Performance ◽  
Building Envelope ◽  
Living Environment ◽  
Heat Energy ◽  
Energy Class ◽  
The European Union ◽  
Certification Procedure

The European Union has adopted legislation aimed to increase the use of renewable energy and improve the effectiveness of conventional-form energy use. Additional structure insulation helps to decrease heat energy loss. Airtightness of the building envelope (building airtightness) is an additional factor that determines comfortable and energy-saving living environment. The conformity of heat energy loss with the object’s design energy class is one of the mandatory indicators used in the obligatory building energy performance certification procedure. Optionally, the objects to be certified are the entire buildings or separate units (flats). There is an issue of concern whether a flat assessed as a separate housing unit would meet the requirements of design energy class depending on the location of the unit in the building. The study is aimed to determine the change in heat loss of end units in terraced houses (townhouses) as a result of various factors, leading to uneven airtightness of the building envelope. The non-destructive assessment of building airtightness was implemented through the combined use of methods, namely Blower Door Test (around 200 measurements) and Infrared Thermography. The hollow clay unit masonry showed ca. 7–11% less airtightness than the sand–lime block masonry structure. The end units were up to 20% less airtight compared to the inside units.

Influence of Thermal Break Element Applied in Balcony Slab on Internal Surface Temperature

2014 ◽  
Vol 1057 ◽  
pp. 79-86
Author(s):  
Peter Buday ◽  
Rastislav Ingeli ◽  
Miroslav Čekon
Keyword(s):  
Energy Efficient ◽  
Energy Use ◽  
Internal Surface ◽  
Building Envelope ◽  
Cold Climate ◽  
Energy Efficient Buildings ◽  
Thermal Bridge ◽  
Advanced Analysis ◽  
Thermal Bridges ◽  
Energy Efficient Building

Reduction of energy use in buildings is an important measure to achieve climate change mitigation. It is essential to minimize heat losses when designing and building energy efficient buildings. For an energy-efficient building in a cold climate, a large part of the space heating demand is caused by transmission losses through the building envelope. To achieve this, it is necessary to have processed a detailed design of buildings. Thermal bridges have to be eliminated in the design of buildings. Thermal bridges occur as point ones or linear. One of the specific details that create thermal leakage is located in balcony slabs. The balcony is one of the main reasons of the increased heat loss of buildings. The presence of thermal bridge in constructions of balcony envelopes influences the energy consumption, durability of the building envelopes, and also the thermal comfort of occupants. This paper is focused on advanced analysis of thermal performance of thermal break element applied in balcony slab with parametric correlation to the thermal properties of wall building envelope.

scholarly journals Influence of User-Related Parameters on Calculated Energy Use in Low-Energy School Buildings

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2985 ◽  
Author(s):  
Branko Simanic ◽  
Birgitta Nordquist ◽  
Hans Bagge ◽  
Dennis Johansson
Keyword(s):  
Energy Use ◽  
Ventilation System ◽  
Building Energy ◽  
Energy Performance ◽  
Hot Water ◽  
Low Energy ◽  
Building Energy Use ◽  
Low Energy Buildings ◽  
Demand Controlled Ventilation ◽  
The Impact

Literature and experience show that there are large discrepancies between the calculated and measured building energy usages, where user-related parameters are significant factors with regard to energy use in low-energy buildings. Furthermore, the difficulties encountered when quantifying these parameters compound these discrepancies. The main aim of this study was to provide feedback that would help the building industry and research communities to predict more accurately the impact of the user-related parameters on energy performance. The results of the study would, subsequently, contribute to minimizing the discrepancies between calculated and measured energy use. This article analyses simulated building energy use based on randomly chosen combinations of measured user-related parameters in three recently built low-energy schools in Sweden. The results show that energy performance can span from 30 to 160 kWh/(m² y) simply by varying the combination of previously measured user-related parameters in building energy simulations. The study shows that the set points for indoor air temperatures during the heating season and the energy required to run a demand-controlled ventilation system have an extensive influence, while tenant electricity use has a slightly lower influence on building energy use. Variations in occupancy rates and energy for hot water usage have the smallest influences on building energy use.

scholarly journals Cost-efficient Nearly Zero-Energy Buildings

2019 ◽  
Vol 111 ◽  
pp. 03075 ◽  
Author(s):  
Heike Erhorn-Kluttig ◽  
Hans Erhorn ◽  
Micha Illner
Keyword(s):  
Life Cycle ◽  
Minimum Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Hot Water ◽  
Technical Solution ◽  
Zero Energy ◽  
Solution Sets ◽  
The Impact ◽  
New Buildings

The next level of energy performance of new buildings within the European Union will be the Nearly Zero-Energy Building (NZEB). A lot of work has been spent on pilot and demonstration buildings on this and also even higher energy performance levels throughout all EU countries. However, most of the high performance buildings realised so far result in higher investment costs when compared to the current national minimum energy performance requirements. The considerably higher investment costs are one of the main barriers to the early application of the NZEB-level in Europe. The EU H2020 project CoNZEBs works on technical solution sets that result in lower investment costs for NZEBs, bringing the costs close to those of conventional new buildings. The focus is on multi-family houses. In each of the four participating countries Germany, Denmark, Italy and Slovenia a team of researchers is analysing which sets of marketready technologies at the building envelope, the services systems for heating, domestic hot water, ventilation and cooling (where required) in combination with renewable energy systems can fulfil the NZEB requirements at lower costs than those incurred by the national mainstream NZEB application. Additional efforts are being spent on the life-cycle costs and the life-cycle analysis of the solution sets, as well as on the impact of future developments of primary energy factors, energy costs and technology efficiencies.

Thermal Bridges Impact on Energy Need for Heating in Low Energy Wooden House

2016 ◽  
Vol 820 ◽  
pp. 139-145
Author(s):  
Rastislav Ingeli ◽  
Jozef Podhorec ◽  
Miroslav Čekon
Keyword(s):  
Thermal Resistance ◽  
Energy Efficient ◽  
Building Envelope ◽  
Cold Climate ◽  
Low Energy ◽  
Energy Efficient Buildings ◽  
Low Energy Buildings ◽  
High Thermal Resistance ◽  
Thermal Bridges ◽  
The Impact

Energy need for heating is depend on the heat loss of the builing. It is essential to minimize heat losses when designing and building energy efficient buildings. For an energy-efficient building in a cold climate, a large part of the space heating demand is caused by transmission losses through the building envelope. The low-energy buildings are enevelope construction with high thermal resistance. The impact of thermal bridges was studied by comparative calculations for a case study building with different amounts of insulation. In the low-energy buildings are envelope construction with high thermal resistance. When more insulation is used the relative impact of thermal bridges increases. In these buildings is necessary to specify each thermal bridges. This thesis deals with the influence of thermal bridges on energy need for heating in low energy wooden houses.

Design and Performance of the Van Geet Off-Grid Home

Solar Energy ◽  
2003 ◽  
Author(s):  
C. Dennis Barley ◽  
Paul Torcellini ◽  
Otto Van Geet
Keyword(s):  
Computer Simulation ◽  
Energy Efficient ◽  
Performance Monitoring ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Hot Water ◽  
Domestic Water ◽  
Heating And Cooling ◽  
And Performance

The Van Geet home near Denver, Colorado, demonstrates the successful integration of energy conservation measures and renewable energy supply in a beautiful, comfortable, energy-efficient, 295-m2 (3,176-ft2) off-grid home in a cold, sunny climate. Features include a tight envelope, energy-efficient appliances, passive solar heating (direct gain and Trombe wall), natural cooling, solar hot water, and photovoltaics. In addition to describing this house and its performance, this paper describes the recommended design process of (1) setting a goal for energy efficiency at the outset, (2) applying rules of thumb, and (3) using computer simulation to fine-tune the design. Performance monitoring and computer simulation are combined for the best possible analysis of energy performance. In this case, energy savings are estimated as 89% heating and cooling, 83% electrical, and nearly 100% domestic water heating. The heating and cooling energy use is 8.96 kJ/°C·day·m2 (0.44 Btu/°F·day·ft2).

scholarly journals Studying the impact factors influencing variable-capacity heat pump energy performance through simulation

2021 ◽  
Vol 246 ◽  
pp. 06005
Author(s):  
Solange Prud’homme ◽  
Stéphanie Breton ◽  
Justin Tamasauskas ◽  
Alex Lachance ◽  
Martin Kegel
Keyword(s):  
Energy Use ◽  
High Efficiency ◽  
Pump Energy ◽  
Energy Performance ◽  
Individual Performance ◽  
Cold Climate ◽  
Performance Characteristics ◽  
Impact Factors ◽  
Variable Capacity ◽  
The Impact

Cold-climate variable-capacity air-to-air heat pumps (VCHPs) have the potential to significantly reduce energy use in the Canadian residential sector. However, optimizing their integration in the Canadian climate can be a challenge, with efficiency and operating behaviour heavily dependent on ambient conditions, building thermal loads, modulating capability and the units’ individual performance characteristics. Better understanding how these factors influence energy performance can lead to improved system selection, and ensure that high efficiency space heating systems contribute towards meeting Canada’s emission reduction targets. This study outlines three major factors – individual performance characteristics (cold climate capacity, part load performance), modulation ratio and sizing – related to VCHP selection, and examines their relative impact on annual energy use and operating behaviour using a simulation-based approach.

Sign in / Sign up

Export Citation Format

Share Document