scholarly journals New Formulations for Dynamic Behavior of Sand-Waste Tire Mixtures in a Small Range of Strain Amplitudes

2017 ◽  
Vol 62 (1) ◽  
pp. 92-101 ◽  
Author(s):  
Ayse Edincliler ◽  
Ali Firat Cabalar ◽  
Abdulkadir Cevik ◽  
Haluk Isik
Keyword(s):  
Shear Modulus ◽  
Damping Ratio ◽  
Strain Range ◽  
Triaxial Tests ◽  
Small Range ◽  
Ratio Test ◽  
Waste Tire ◽  
Confining Pressures ◽  
Input Variables ◽  
Tire Crumbs

This paper describes the results of a series of cyclic triaxial tests on sand - waste tire mixtures, and applications of genetic programming (GP) and stepwise regression (SR) for the prediction of damping ratio and shear modulus of the mixtures tested. In the tests, shear modulus, and damping ratio of the geomaterials were measured for a strain range of 0.0001% up to 0.04%. The input variables in the developed GP and SR models are the waste tire content (0%, 10%, 20%, and 30%), waste tire type (tire crumbs or tire buffings), strain, and confining pressures (40 kPa, 100 kPa, and 200 kPa), and outputs are shear modulus and damping ratio. Test results show that the shear modulus and the damping ratio of the mixtures are strongly influenced by the waste tire inclusions. The performance of the proposed GP models (R2 = 0.95 for shear modulus, and R2 = 0.94 for damping ratio) are observed to be more accurate than that of the SR models (R2 = 0.87 for shear modulus, and R2 = 0.91 for damping ratio).

scholarly journals Dynamic Properties of Sand-Sawdust Mixture for Modeling Deposit Soil

2019 ◽  
Vol 9 (18) ◽  
pp. 3863
Author(s):  
Pan ◽  
Li ◽  
Lu ◽  
Chen
Keyword(s):  
Shear Modulus ◽  
Shear Strain ◽  
Shaking Table Test ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Strain Range ◽  
Confining Pressure ◽  
Shaking Table ◽  
Triaxial Tests ◽  
Hysteresis Curve

Soil mixtures with various materials such as scraps of rubber tire, iron powder, and synthetic fibers have been widely used in civil engineering for experimental research or infrastructure construction and maintenance. However, these materials are not only expensive, but may also result in environmental concerns. In recent years, sawdust, because of its light-weight, inexpensive, and environmental friendly characteristics, has frequently been used in the shaking table test to adjust the dynamic properties of experimental soil. However, the dynamic properties of a sand-sawdust mixture for the shaking table test are still unclear. In this paper, the dynamic properties and the hysteresis curve characteristics of the sand-sawdust mixture as well as the influence of the sawdust content and confining pressure on the dynamic properties were studied using a series of consolidated drained dynamic triaxial tests. The test results show that, with the increase of the shear strain, the shape of the hysteresis loops changes from symmetrical willow-leaf to asymmetry sharp-leaf. For a given confining pressure, both the shear modulus and damping ratio decreases as the sawdust percentage increases. It was observed that, with an increase in confining pressure, the shear modulus increased while the damping ratio decreased slightly in the shear strain range of 10−3 to 7×10−3. It was also observed that the maximum shear modulus increased as the confining pressure increased, while the maximum damping ratio remained nearly constant. In addition, both the maximum shear modulus and the maximum damping ratio decreased as the sawdust content increased. Finally, the normalized shear modulus and damping ratio were established, which can be used in simulations using the shaking table test.

scholarly journals Dynamic Shear Modulus and Damping Ratio of Sand–Rubber Mixtures under Large Strain Range

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4017 ◽  
Author(s):  
Jianfeng Li ◽  
Jie Cui ◽  
Yi Shan ◽  
Yadong Li ◽  
Bo Ju
Keyword(s):  
Shear Modulus ◽  
Volume Content ◽  
Damping Ratio ◽  
Rubber Particle ◽  
Triaxial Tests ◽  
Dynamic Shear Modulus ◽  
Particle Sizes ◽  
Dynamic Shear ◽  
Confining Pressures ◽  
Shear Strains

Adding rubber into sands has been found to improve the mechanical behavior of sands, including their dynamic properties. However, ambiguous and even contradictory results have been reported regarding the dynamic behavior of sand–rubber mixtures, particularly in terms of the damping ratio. A series of cyclic triaxial tests were, therefore, performed under a large range of shear strains on sand–rubber mixtures with varying rubber volume contents, rubber particle sizes, and confining pressures. The results indicate the dynamic shear modulus decreases with increasing rubber volume content and with decreasing particle size and confining pressure. The relationship of the damping ratio to the evaluated parameters is complicated and strain-dependent; at shear strains less than a critical value, the damping ratio increases with increasing rubber volume content, whereas the opposite trend is observed at greater shear strains. Furthermore, sand–rubber mixtures with different rubber particle sizes exceed the damping ratio of pure sand at different rubber volume contents. A new empirical model to predict the maximum shear moduli of mixtures with various rubber volume contents, rubber particle sizes, and confining pressures is accordingly proposed. This study provides a reference for the design of sand–rubber mixtures in engineering applications.

scholarly journals Effects of granular shape on shear modulus and damping ratio of gravel

2019 ◽  
Vol 23 (1) ◽  
pp. 87-91
Author(s):  
Kai Cui ◽  
Hang Sheng
Keyword(s):  
Shear Modulus ◽  
Shear Strain ◽  
Strain Amplitude ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Test Results ◽  
Grain Composition ◽  
Confining Pressures ◽  
Shear Strain Amplitude

The effects of the consolidation ratio, effective confining pressure, gravel content, and granule breakage on the shear modulus and damping ratio of gravel have been extensively researched in recent years. However, studies on the effect of the granular shape are rare. Thus, under different confining pressures, dynamic triaxial tests were performed on gravel specimens to investigate the effect of granular shape on the shear modulus and damping ratio of gravel specimens by using a multifunctional triaxial testing instrument. The samples consisted of two kinds of gravel with the same grain composition and relative density of 45%. The test results indicate that, when the confining pressure and shear strain amplitude exceed 300 kPa and 7×10-4, respectively, gravel with a round granular shape has a higher shear modulus compared to an angular shape. Conversely, when the shear strain amplitude exceeds 2×10-4, the damping ratio of angular gravel exceeds that of round granules.

Dynamic Properties of Sandy Soils at Large Shear Strains with Special Reference to the Influence of Non-Plastic Fines

2011 ◽  
Vol 2 (2) ◽  
pp. 16-28
Author(s):  
T. G. Sitharam ◽  
B. V. Ravishankar ◽  
J. S. Vinod
Keyword(s):  
Shear Modulus ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Sandy Soils ◽  
Triaxial Tests ◽  
Natural Sand ◽  
Cyclic Triaxial Tests ◽  
Confining Pressures ◽  
Laboratory Investigations ◽  
Sand Base

This paper presents the results of the dynamic properties such as shear modulus and damping ratio of sandy soils, especially at large shear strain levels (>0.2%). A series of strain controlled cyclic triaxial tests were carried out on sand samples collected from the earthquake affected areas of Gujarat, India. Laboratory investigations were conducted on natural sand (Base sand) and clean sand samples. The shear modulus and damping ratios have been estimated based on the first cycle information. The effect of different parameters such as number of loading cycles, relative density, confining pressures, and non-plastic fines on the dynamic properties of the soils has been studied. It was observed that shear modulus decreases with an increase in the percentage of non-plastic fines. However, a slight increase in damping ratio was observed with increase in non-plastic fines.

scholarly journals Normalized Shear Modulus and Damping Ratio of Soil–Rock Mixtures With Different Volumetric Block Proportions

2021 ◽  
Vol 9 ◽  
Author(s):  
Shengnian Wang ◽  
Xinqun Gao ◽  
Honglei Hui ◽  
Wei Ma ◽  
Chong Shi ◽  
...  
Keyword(s):  
Shear Modulus ◽  
Large Scale ◽  
Volume Fraction ◽  
Damping Ratio ◽  
Triaxial Tests ◽  
Dynamic Shear Modulus ◽  
Dynamic Shear ◽  
Confining Pressures ◽  
Gravelly Soils ◽  
Shear Behaviors

The volume fraction of rock blocks plays a particularly significant role in static/dynamic shear behaviors of soil–rock mixtures (SRM). Large-scale cyclic triaxial tests for SRM with different volumetric block proportions (VBPs) were performed at different confining pressures to investigate the reduction of dynamic shear modulus (G) and the increase of damping ratio (λ). Results indicate that VBP has a significant effect on the dynamic behaviors of SRM. The higher VBP is more likely to result in a gentler reduction of G and a faster increase of λ. The variations of dynamic shear modulus ratio (G/G0) and normalized damping ratio (λnor) fall within relatively narrow bands but are very different with gravelly soils and sands due to VBP with particle size larger than 2 mm. The G/G0 and λnor can be characterized by empirical functions about normalized shear strain amplitude (γnor).

Shear Modulus and Damping Ratio of Sand–Gravel Mixtures Over a Wide Strain Range

2018 ◽  
Vol 23 (8) ◽  
pp. 1407-1440 ◽  
Author(s):  
Guoxing Chen ◽  
Zhenglong Zhou ◽  
Tian Sun ◽  
Qi Wu ◽  
Lingyu Xu ◽  
...  
Keyword(s):  
Shear Modulus ◽  
Damping Ratio ◽  
Strain Range

DEGRADATION EFFECT OF SEAWATER ON THE LONG-TERM DYNAMIC BEHAVIOR OF ARTIFICIALLY CEMENTED SAND

2013 ◽  
Vol 07 (04) ◽  
pp. 1350031 ◽  
Author(s):  
BO LI ◽  
YUANQIANG CAI ◽  
XIANGWU ZENG ◽  
LINYOU PAN
Keyword(s):  
Shear Modulus ◽  
Dynamic Behavior ◽  
Tap Water ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Resonant Column ◽  
Cyclic Triaxial Tests ◽  
Cemented Sand

The dynamic behavior of lightly cemented sand under long-term seawater attack was evaluated in this study. Resonant column and cyclic triaxial tests were employed to investigate the evolution of the shear modulus and damping ratio of cemented sand with respect to soaking period (SP), confining pressure, and cement content (CC). The results of this study show that the cementation of the sand is affected by soaking in seawater to a greater extent than by soaking in tap water. The shear modulus of the cemented sand soaked in seawater was smaller than that of the cemented sand soaked in tap water. The damping ratio increased significantly, as the SP increased and was greater for the cemented sand soaked in seawater than for the cemented sand soaked in tap water. The dynamic behavior of nonhomogenous specimens was examined. Crystallization of salts could be clearly observed and probably explains the evolution of the dynamic behavior of the cemented sand. Finally, the shear modulus was fitted using Rollins' Law [Rollins et al., 1998], which demonstrates that the parameters used in the equation can be reasonably fitted linearly over a range of SPs.

scholarly journals Empirical Formulas of Shear Modulus and Damping Ratio for Geopolymer-Stabilized Coarse-Grained Soils

2021 ◽  
Vol 9 ◽  
Author(s):  
Shengnian Wang ◽  
Xinqun Gao ◽  
Wei Ma ◽  
Guoyu Li ◽  
Chong Shi ◽  
...  
Keyword(s):  
Shear Modulus ◽  
Shear Strain ◽  
Strain Amplitude ◽  
Large Scale ◽  
Damping Ratio ◽  
Coarse Grained ◽  
Dynamic Shear Modulus ◽  
Empirical Formulas ◽  
Confining Pressures ◽  
Shear Strain Amplitude

The contribution of gravel fraction on the maximum shear modulus (Gmax), dynamic shear modulus ratio (G/Gmax), and damping ratio (λ) of cementitious coarse-grained soils has not been fully understood yet. Large-scale triaxial cyclic tests for geopolymer-stabilized coarse-grained soils (GSCGSs) were conducted with different volumetric block proportions (VBPs) under various confining pressures (CPs) for investigating their dynamic behaviors and energy dissipation mechanisms. Results indicate that the Gmax of GSCGS increases linearly with VBPs but nonlinearly with CP. High VBPs will probably result in a gentle decrease in G/Gmax and a rapid increase in normalized λ (λnor), while the opposite is the case for a high CP. With the shear strain amplitude being normalized, the G/Gmax and λnor are distributed in a narrow band with low dispersion and thus can be well-described by empirical functions of the normalized shear strain amplitude.

scholarly journals Laboratory Characterization of a Compacted–Unsaturated Silty Sand with Special Attention to Dynamic Behavior

2020 ◽  
Vol 10 (7) ◽  
pp. 2559
Author(s):  
Andrzej Głuchowski ◽  
Zdzisław Skutnik ◽  
Marcin Biliniak ◽  
Wojciech Sas ◽  
Diego Lo Presti
Keyword(s):  
Shear Modulus ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Silty Sand ◽  
Triaxial Tests ◽  
Bender Element ◽  
State Dependent ◽  
Laboratory Characterization ◽  
Dynamic Excitations

The dynamic properties of compacted non-cohesive soils are desired not only because of the risk of natural sources of dynamic excitations such as earthquakes, but mostly because of the anthropogenic impact of machines that are working on such soils. These soils are often unsaturated, which positively affects the soil’s mechanical properties. The information about the values of these parameters is highly desirable for engineers. In this article, we performed a series of tests, including oedometric tests, resonant column tests, bender element tests, and unsaturated triaxial tests, to evaluate those characteristic parameters. The results showed that sandy silt soil has a typical reaction to dynamic loading in terms of shear modulus degradation and the damping ratio curves’ characteristics, which can be modeled by using empirical equations. We found that the compaction procedure caused an over-consolidation state dependent on the moisture content during compaction effort. The article analyzed the soil properties that impact the maximum shear modulus G0 value. Those properties were suction s, confining pressure σ3, and compaction degree represented by the void ratio function f(e).

scholarly journals Effect of Sand Fouling on the Dynamic Properties and Volume Change of Gravel During Cyclic Loadings

2020 ◽  
Author(s):  
Meysam Bayat
Keyword(s):  
Shear Modulus ◽  
Shear Strain ◽  
Dynamic Behavior ◽  
Volume Change ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Practical Applications ◽  
Large Shear Strain

Understanding the factors that influence the dynamic behavior of granular soils during cyclic loading is critical to infrastructure design. Previous research has lacked quantitative study of the effects of fouling index (FI), mean effective confining pressure, relative density, shear strain level and anisotropic consolidation, especially when the effective vertical stress is lower than the effective horizontal stress on the dynamic behavior of gravelly soils. The objective of the present study was to evaluate the dynamic behavior and volume change of both clean and fouled specimens for practical applications. To this end, cyclic triaxial tests with local strain measurements under both isotropic and anisotropic confining conditions were conducted. It is found that the fouled specimen with 50 % sand (i.e. the specimen which contains 50 % gravel and 50 % sand) has the highest shear modulus at low shear strain levels and the largest volume reduction and damping ratio at large shear strain levels. The results of tests indicate that the effect of fouling index on the shear modulus is reduced at large shear strain levels. Volumetric contraction due to the increase in mean effective confining pressure is more significant at large shear strain levels. The results also indicate that the stiffness of the specimens under anisotropic compression mode are larger than those in extension or isotropic mode.

Sign in / Sign up

Export Citation Format

Share Document