scholarly journals Development of a Reinforced Concrete Sheet Pile Wall Element

2020 ◽  
Author(s):  
Kristóf Lődör ◽  
János Szendefy ◽  
Olivér Kovács ◽  
Zsombor Illés
Keyword(s):  
Reinforced Concrete ◽  
Design Concept ◽  
Sheet Pile ◽  
Major Player ◽  
Wall Element ◽  
Geotechnical Design ◽  
Complex Structural ◽  
Structural Behaviors ◽  
Concrete Elements ◽  
Sheet Pile Wall

In the forthcoming years intensive renovation and reconstruction works can be expected on the banks’ freshwaters of Hungary. For the rehabilitation of the shores of Lake Velence works are starting in 2020. To support these investments there has been a demand for prefabricated reinforced concrete sheet pile walls. Realizing the opportunity, a major player in the market of pre-fabricated reinforced concrete elements for water way construction, CSOMIÉP Ltd. decided to develop a reinforced concrete sheet pile wall. In this study the development and complex structural and geotechnical design concept are shown through the major structural behaviors and useable geometries.

Anchor rod forces and maximum bending moments in sheet pile walls using the factored strength approach

1996 ◽  
Vol 33 (5) ◽  
pp. 815-821 ◽  
Author(s):  
A B Schriver ◽  
A J Valsangkar
Keyword(s):  
Water Pressure ◽  
Limit State ◽  
Bending Moment ◽  
Ultimate Limit State ◽  
Sheet Pile ◽  
Limit States ◽  
Working Stress ◽  
Geotechnical Design ◽  
Ultimate Limit State Design ◽  
Sheet Pile Wall

Recently, the limit states approach using factored strength has been recommended in geotechnical design. Some recent research has indicated that the application of limit states design using recommended load and strength factors leads to conservative designs compared with the conventional methods. In this study the influence of sheet pile wall geometry, type of water pressure distribution, and different methods of analysis on the maximum bending moment and achor rod force are presented. Recommendations are made to make the factored strength design compatible with conventional design. Key words: factored strength, working stress design, ultimate limit state design, anchored sheet pile wall, bending moment, anchor rod force.

scholarly journals Structural Behaviors of Reinforced Concrete Piers Rehabilitated with FRP Wraps

2017 ◽  
Vol 2017 ◽  
pp. 1-14
Author(s):  
Junsuk Kang
Keyword(s):  
Reinforced Concrete ◽  
Fiber Reinforced Polymer ◽  
Design Parameters ◽  
Masonry Structures ◽  
Finite Element Analyses ◽  
Maintenance Costs ◽  
Existing Structures ◽  
Reinforced Polymer ◽  
Complex Structural ◽  
Structural Behaviors

The use of fiber-reinforced polymer (FRP) wraps to retrofit and strengthen existing structures such as reinforced concrete piers is becoming popular due to the higher tensile strength, durability, and flexibility gained and the method’s ease of handling and low installation and maintenance costs. As yet, however, few guidelines have been developed for determining the optimum thicknesses of the FRP wraps applied to external surfaces of concrete or masonry structures. In this study, nonlinear pushover finite element analyses were utilized to analyze the complex structural behaviors of FRP-wrapped reinforced rectangular piers. Design parameters such as pier section sizes, pier heights, pier cap lengths, compressive strengths of concrete, and the thicknesses of the FRP wraps used were thoroughly tested under incremental lateral and vertical loads. The results provide useful guidelines for analyzing and designing appropriate FRP wraps for existing concrete piers.

SETTING A DIAGRAM APPROACH TO CALCULATING VIBRATED, CENTRIFUGED AND VIBROCENTRIFUGED REINFORCED CONCRETE COLUMNS WITH A VARIATROPIC STRUCTURE

2020 ◽  
pp. 22-34
Author(s):  
Л. Р. Маилян ◽  
С. А. Стельмах ◽  
Е. М. Щербань ◽  
М. П. Нажуев
Keyword(s):  
Experimental Data ◽  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Cross Section ◽  
Concrete Columns ◽  
Reinforced Concrete Columns ◽  
The Cross ◽  
Concrete Elements ◽  
Diagram Approach

Состояние проблемы. Железобетонные элементы изготавливаются, как правило, по трем основным технологиям - вибрированием, центрифугированием и виброцентрифугированием. Однако все основные расчетные зависимости для определения их несущей способности выведены, исходя из основного постулата - постоянства и равенства характеристик бетона по сечению, что реализуется лишь в вибрированных колоннах. Результаты. В рамках диаграммного подхода предложены итерационный, приближенный и упрощенный способы расчета несущей способности железобетонных вибрированных, центрифугированных и виброцентрифугированных колонн. Выводы. Расчет по диаграммному подходу показал существенно более подходящую сходимость с опытными данными, чем расчет по методике норм, а также дал лучшие результаты при использовании дифференциальных характеристик бетона, чем при использовании интегральных и, тем более, нормативных характеристик бетона. Statement of the problem. Reinforced concrete elements are typically manufactured according to three basic technologies - vibration, centrifugation and vibrocentrifugation. However, all the basic calculated dependencies for determining their bearing capacity were derived using the main postulate, i.e., the constancy and equality of the characteristics of concrete over the cross section, which is implemented only in vibrated columns. Results. Within the framework of the diagrammatic approach, iterative, approximate and simplified methods of calculating the bearing capacity of reinforced concrete vibrated, centrifuged and vibrocentrifuged columns are proposed. Conclusions. The calculation according to the diagrammatic approach showed a significantly better convergence with the experimental data than that using the method of norms, and also performs better when using differential characteristics of concrete than when employing integral and particularly standard characteristics of concrete.

Sign in / Sign up

Export Citation Format

Share Document