scholarly journals Determination of Passive Failure Surface Geometry for Cohesionless Backfills

2020 ◽  
Author(s):  
Behzad Soltanbeigi ◽  
Adlen Altunbas ◽  
Ahmet Talha Gezgin ◽  
Ozer Cinicioglu
Keyword(s):  
Relative Density ◽  
Failure Surface ◽  
Friction Angle ◽  
Model Tests ◽  
Small Scale ◽  
Geometrical Parameters ◽  
Surface Geometry ◽  
Peak Friction Angle ◽  
Non Linear

Correct determination of the passive failure surface geometry is necessary for the design of retaining structures. The conventional theories assume linear passive failure surfaces even though it is known that the actual failure surfaces are non-linear. Many researchers claimed the appropriateness of a hybrid curved-linear method. This approach estimates the curved section by a log-spiral function, which then connects to the backfill surface with the conventional linear assumption. The main drawback here is that the geometric properties of the hybrid mathematical function is not directly related to the mechanical properties of soils. Thus, this study attempts to provide a mechanical description for the assumed geometrical parameters. For this purpose, a series of 1 g small scale retaining wall model tests, simulating passive failure, are conducted on two different backfill soils. The relative density is varied in the model tests and the resultant peak friction angles of the backfills are calculated as functions of failure stress state and relative density using a well-known empirical equation. Transparent sidewalls allow for visualization of the failure surface evolution, which is obtained by capturing images and analysing then through Particle Image Velocimetry (PIV) technique. Subsequently, the quantified slip zones are fitted with the hybrid curved-linear approach. The relationships between the peak friction angle and the geometrical characteristics of the best-fit log-spiral and linear functions are investigated. Obtained results are used to propose a set of equations that allow the estimation of non-linear passive failure surfaces as function of peak friction angle.

scholarly journals Field and Laboratory-based Approach for the Determination of Friction Angle of Geological Discontinuities of Malaysian Granites

2011 ◽  
Vol 28 (2) ◽  
pp. 151 ◽  
Author(s):  
R. A Ghani ◽  
T. L Goh ◽  
A. M Hariri ◽  
Y. N Baizura
Keyword(s):  
Friction Angle ◽  
Roughness Coefficient ◽  
Average Value ◽  
Peak Friction Angle ◽  
Maximum Value ◽  
Wide Range ◽  
Discontinuity Surfaces ◽  
Geological Discontinuities ◽  
Range Of Values

The basic friction angle, Φb for artificially sawn discontinuity planes for fresh granite, as determined by tilt testing, has an average value of 30º. For the natural rough discontinuity surfaces, a wide range of values have been determined for the peak friction angle, Φpeak ranging from 47º to a maximum value of 80º, depending on the joint roughness coefficient (JRC). The average values of the friction angles for the different degrees of roughness were as follows: JRC 2–4 = 58°; JRC 6–8 = 60°; JRC 8–10 = 47°; JRC 12–14 = 60°; JRC 14–16 = 71° ; JRC 18–20 = 80°.

The strength and dilatancy of sand

1992 ◽  
Vol 29 (3) ◽  
pp. 522-526 ◽  
Author(s):  
Y. P. Vaid ◽  
S. Sasitharan
Keyword(s):  
Relative Density ◽  
Triaxial Test ◽  
Friction Angle ◽  
Stress Path ◽  
Triaxial Tests ◽  
Confining Stress ◽  
Peak Friction Angle ◽  
Loading Direction ◽  
Dilation Rate ◽  
Unique Relationship

The effects of stress path and loading direction in the triaxial test on strength and dilatancy of sand are investigated. It is shown that the unique relationship observed between peak friction angle and dilation rate at peak in conventional triaxial tests is followed regardless of stress path, confining stress at failure, relative density, and the mode of loading (compression or extension). Key words : sand, peak friction angle, dilatancy, stress path, triaxial test.

Experimental Determination of Water Motions Inside a Moonpool

2017 ◽  
Author(s):  
Bastien Abeil
Keyword(s):  
Experimental Determination ◽  
Transfer Functions ◽  
Side Wall ◽  
Model Tests ◽  
Irregular Waves ◽  
Video Recordings ◽  
Non Linear ◽  
Relative Water ◽  
Water Elevation

Model tests of a drillship with a rectangular moonpool opening were conducted in regular and irregular waves from the bow and bow-quarter. Most tests were conducted at zero speed, the rest was performed with the model towed to a speed of 10 kn. From the video-recordings and transfer functions of the measured relative water elevation inside the moonpool, the typical piston and first sloshing modes are well captured, for wave frequencies that agree relatively well with relevant formulations. A few tests conducted at varying wave amplitudes show that the water elevation is non-linear by nature, while repeat tests conducted with the moonpool fitted with two layers of side wall flanges shows that these can reduce the water motions by nearly 40 %.

scholarly journals The Shear Strength and Dilatancy Behavior of Wheat Stored in Silos

Complexity ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Changnv Zeng ◽  
Yuke Wang
Keyword(s):  
Relative Density ◽  
Quantitative Relationship ◽  
Friction Angle ◽  
Practical Method ◽  
Density Peak ◽  
Dilatancy Angle ◽  
Stored Wheat ◽  
Direct Shear Tests ◽  
Peak Friction Angle ◽  
Advanced Model

This paper focuses on the shear and dilatancy behavior of wheat stored in silos with various densities and normal stresses. The goal is to find a quantitative relationship modeling the peak friction angle and maximum dilatancy angle of wheat stored in silos. A total of 48 direct shear tests were carried out to research the evolution of shear and dilatancy of stored wheat in silos. It is revealed that strength of wheat in bulk attributes to the combination of frictional and dilatant during shearing, in particular attributing to its elliptic shape. An increase in relative density enhances the peak friction angle as well as the dilation. The relationships between relative density, peak friction angle, and dilatancy angle were presented based on the tests data and Bolton’s theory. Then an advanced model is developed to evaluate the peak shear behavior of wheat stored in silos considering the dilatancy of the stored wheat. It is a practical method to predict the strength and dilatancy behavior of wheat stored in silos.

scholarly journals DETERMINATION OF THE WAVE HEIGHT IN NATURE FROM MODEL TESTS SUPPLEMENTED BY CALCULATION

2011 ◽  
Vol 1 (6) ◽  
pp. 12
Author(s):  
J. G.H.R. Diephuis ◽  
J. G. Gerritze
Keyword(s):  
Shallow Water ◽  
Wave Height ◽  
Deep Water ◽  
Bottom Topography ◽  
Model Tests ◽  
Small Scale ◽  
Wave Characteristics ◽  
Sea Bottom ◽  
The Waves

This paper deals with the problem of determining the wave characteristics in shallow water from those in deep water. In general this can be done by means of a refraction calculation. If the sea bottom topography is too irregular the height of the waves can be determined by means of a small-scale refraction model. In both cases, however, some additional effects have to be taken into account, viz. the influence of the bottom friction and the influence of the wind.

scholarly journals A Pseudodynamic Approach of Seismic Active Pressure on Retaining Walls Based on a Curved Rupture Surface

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Zuofei Yan ◽  
Yahong Deng ◽  
Jia He ◽  
You Xuan ◽  
Wei Wu
Keyword(s):  
Limit Equilibrium ◽  
Earth Pressure ◽  
Logarithmic Spiral ◽  
Failure Surface ◽  
Friction Angle ◽  
Retaining Walls ◽  
Rupture Surface ◽  
Straight Line ◽  
Dynamic Earth Pressure

Reasonable determination of the magnitude and distribution of dynamic earth pressure is one of the major challenges in the seismic design of retaining walls. Based on the principles of pseudodynamic method, the present study assumed that the critical rupture surface of backfill soil was a composite curved surface which was in combination with a logarithmic spiral and straight line. The equations for the calculation of seismic total active thrusts on retaining walls were derived using limit equilibrium theory, and earth pressure distribution was obtained by differentiating total active thrusts. The effects of initial phase, amplification factor, and soil friction angle on the distribution of seismic active earth pressure have also been discussed. Compared to pseudostatic and pseudodynamic methods for the determination of planar failure surface forms, the proposed method receives a bit lower value of seismic active earth pressures.

Non-Linear Interaction of MHD Waves with Small-Scale Ionospheric Irregularities

2004 ◽  
Vol 61 (7-12) ◽  
pp. 1055-1071
Author(s):  
N. N. Gerasimova ◽  
V. G. Sinitsin ◽  
Yu. M. Yampolski
Keyword(s):  
Ionospheric Irregularities ◽  
Mhd Waves ◽  
Small Scale ◽  
Linear Interaction ◽  
Non Linear

Determination of Concrete Cube Strength from Used Samples / Určení Krychelné Pevnosti Betonu U Použitých Zkušebních Trámců

2012 ◽  
Vol 12 (2) ◽  
pp. 186-194 ◽  
Author(s):  
Oldřich Sucharda ◽  
David Mikolášek ◽  
Jiří Brožovský
Keyword(s):  
Compressive Strength ◽  
Concrete Beams ◽  
Linear Analysis ◽  
Bending Tests ◽  
Cube Strength ◽  
Non Linear ◽  
Compressive Strength Of Concrete ◽  
Concrete Cube

Abstract This paper deals with the determination of compressive strength of concrete. Cubes, cylinders and re-used test beams were tested. The concrete beams were first subjected to three-point or fourpoint bending tests and then used for determination of the compressive strength of concrete. Some concrete beams were reinforced, while others had no reinforcement. Accuracy of the experiments and calculations was verified in a non-linear analysis.

Sign in / Sign up

Export Citation Format

Share Document