scholarly journals Shake Table Tests to Measure the Dynamic Performance of Geotextile-reinforced Embankment

2017 ◽  
Author(s):  
Ayşe Edinçliler ◽  
Yasin S. Toksoy
Keyword(s):  
Cyclic Loading ◽  
Seismic Performance ◽  
Dynamic Load ◽  
Dynamic Performance ◽  
Time History ◽  
Shake Table ◽  
Shake Table Tests ◽  
Highway Embankments ◽  
Highway Embankment

Using geosynthetics in highway embankments can reduce theimpact of hazardous earthquakes by transmitting less excitationto improve the seismic performance. This study uses a 1-greduced scale (1/50) approach and subjects the model embankmentto an earthquake time history as well as several levelsof uniform cyclic loading. The main focus of comparison isbetween an unreinforced embankment and a one, reinforcedwith two levels of geosynthetics material. Results reveal thatgeotextile reinforced highway embankment models performmuch better under the applied motions. Larger amplitudes causemore severe deformations as a result of the increased dynamicloads. It is also revealed that the effectiveness of the geosyntheticsis dominated by the seismic frequency. Deamplificationis observed within the geotextile reinforced embankment but thedegree of deamplification is highly depended on the predominantfrequency of the dynamic load.

Physical Model Study of the Seismic Performance of Highway Embankments with and without Geotextile

2017 ◽  
Vol 11 (02) ◽  
pp. 1750003 ◽  
Author(s):  
Ayşe Edinçliler ◽  
Yasin Sait Toksoy
Keyword(s):  
Seismic Performance ◽  
Structural Safety ◽  
Shake Table ◽  
Geosynthetic Reinforcement ◽  
Shake Table Tests ◽  
Seismic Safety ◽  
Dynamic Motion ◽  
Slope Inclination ◽  
Highway Embankments ◽  
Motion Characteristics

In order to ensure structural safety and integrity in earthquake conditions, it may be useful or even necessary to increase the seismic safety of the highway embankments with reinforcement inclusions. The inclusion of geosynthetics in highway embankments may provide an additional tensile strength and durability to construct more stable and earthquake resistant embankments. In this study, the contributions of the primary factors as inclusion of the geotextile reinforcement, slope inclination and dynamic motion characteristics affecting the seismic performance of the highway embankments are evaluated. Shake table models of the unreinforced and geosynthetic reinforced highway embankments with different slope inclinations are designed. An extensive series of shake table tests were performed under dynamic motions with different predominant frequencies. Test results revealed that inclusion of geotextiles in the embankment model causes deamplification of the transmitted accelerations traveling through the reinforced embankment models. Thus, the geosynthetic reinforcement successfully enhances the seismic performance and mitigates earthquake-related hazards. Contribution of this study to the literature is that the efficiency of the geosynthetic reinforcement by means of energy absorption properties is highly dependent on the dynamic motion characteristics but less dependent to the degree of slope inclination.

Seismic performance of pile group-structure system in liquefiable and non-liquefiable soil from large-scale shake table tests

2020 ◽  
Vol 138 ◽  
pp. 106299 ◽  
Author(s):  
Chengshun Xu ◽  
Pengfei Dou ◽  
Xiuli Du ◽  
M. Hesham El Naggar ◽  
Masakatsu Miyajima ◽  
...  
Keyword(s):  
Seismic Performance ◽  
Large Scale ◽  
Group Structure ◽  
Pile Group ◽  
Shake Table ◽  
Shake Table Tests ◽  
Structure System ◽  
Liquefiable Soil

SEISMIC PERFORMANCE OF MASONRY-INFILLED RC FRAMES WITH AND WITHOUT RETROFIT

2013 ◽  
Vol 07 (03) ◽  
pp. 1350023 ◽  
Author(s):  
P. BENSON SHING ◽  
IOANNIS KOUTROMANOS ◽  
ANDREAS STAVRIDIS
Keyword(s):  
Finite Element ◽  
Seismic Performance ◽  
Numerical Study ◽  
Critical Role ◽  
Finite Element Models ◽  
Shake Table ◽  
Shake Table Tests ◽  
Rc Frames ◽  
Infilled Rc Frames ◽  
Masonry Infilled Rc Frames

This paper presents the findings of a research that focused on the seismic performance of masonry-infilled, nonductile, RC frames. This research has resulted in improved analytical methods and effective retrofit techniques to assess and enhance the performance of these structures. The methods were validated by a series of quasi-static tests conducted on one-story frame specimens as well as shake-table tests conducted on two 2/3-scale, three-story, two-bay, masonry-infilled, RC frames. This paper focuses on the observations from the shake-table tests and the further insight gained from a numerical study conducted with finite element models. The first shake-table test specimen had no retrofit measures, and the second had infill walls in the first and second stories strengthened with Engineered Cementitious Composite (ECC) and Fiber Reinforced Polymeric (FRP) overlays, respectively. The tests demonstrated the effectiveness of the retrofit measures. Finite element models that combine smeared and discrete cracks have been used in a numerical study to examine the benefits of the ECC retrofit and the influence of the capacity of the shear dowels that connect an ECC overlay to the RC beams on structural performance. It has been shown that these shear dowels play a critical role in enhancing both the strength and ductility of a retrofitted structure.

Seismic Performance of a Base Isolated Structure by Shake Table Tests

2008 ◽  
Author(s):  
Cem Yenidoǧan ◽  
Eren Uçkan ◽  
Adolfo Santini ◽  
Nicola Moraci
Keyword(s):  
Seismic Performance ◽  
Shake Table ◽  
Shake Table Tests

Study on Cold-Formed Steel of Thin-Walled Housing for Dynamic Performance

2011 ◽  
Vol 250-253 ◽  
pp. 3305-3308
Author(s):  
Yong Yao ◽  
Yun Peng Chu ◽  
Li Wang ◽  
Rui Zhao
Keyword(s):  
Seismic Performance ◽  
Seismic Waves ◽  
Lateral Displacement ◽  
Dynamic Performance ◽  
Time History ◽  
Steel Structure ◽  
Seismic Intensity ◽  
Finite Element Software ◽  
Cold Formed Steel ◽  
Rare Earthquake

Cold-formed steel structure is suitable for post-earthquake reconstruction since its good seismic performance and construction speed. Analyzing the dynamic characteristic of a two story office building by using the finite element software ANSYS. And the results show that: (1) in the time history analysis based on three types of seismic waves the lateral displacement of the structure and rotation between layers to meet the relevant specifications when confront the rare earthquake (2) Under the seismic loads, earthquake response acceleration amplification factor is smaller which indicating better seismic performance and it can be used in areas with high seismic intensity.

Seismic Performance of Stone Masonry Buildings Used in the Himalayan Belt

2013 ◽  
Vol 29 (4) ◽  
pp. 1159-1181 ◽  
Author(s):  
Qaisar Ali ◽  
Akhtar Naeem Khan ◽  
Mohammad Ashraf ◽  
Awais Ahmed ◽  
Bashir Alam ◽  
...  
Keyword(s):  
Seismic Performance ◽  
Cost Effective ◽  
Stone Masonry ◽  
Shake Table ◽  
Masonry Buildings ◽  
Masonry Structures ◽  
Limit States ◽  
Shake Table Tests ◽  
Capacity Curves ◽  
Rubble Stone Masonry

Rubble-stone masonry structures are found abundantly in the Asian countries along the Himalayan range. Such structures are usually constructed in dry-stone masonry or are constructed in mud mortar, which makes them susceptible to damage and collapse in earthquakes. In order to study the seismic behavior of these structures, dynamic shake table tests on three reduced-scale rubble-stone masonry models were conducted. The models comprised a representative school building, a residential building, and a model incorporating simple cost-effective features in the form of horizontal and vertical reinforced concrete elements. This paper presents the results of shake table tests carried out on rubble-stone masonry buildings including: damage pattern, capacity curves, damage limit states, and response modification factors of these structures. Test data indicates that seismic performance of rubble-stone masonry structures can be significantly improved by incorporating cost-effective features such as vertical members and relatively thin horizontal bands.

scholarly journals Data set from shake table tests of free-standing rocking bodies

2021 ◽  
pp. 875529302110200
Author(s):  
Michalis F Vassiliou ◽  
Cihan Cengiz ◽  
Matt Dietz ◽  
Luiza Dihoru ◽  
Marco Broccardo ◽  
...  
Keyword(s):  
Earthquake Engineering ◽  
Numerical Models ◽  
Three Dimensional ◽  
Time History ◽  
Stochastic Comparison ◽  
Shake Table ◽  
Free Standing ◽  
Earthquake Excitation ◽  
Shake Table Tests ◽  
Data Set

In earthquake engineering, structural models are validated by performing a time history analysis and comparing its maximum to the maximum response obtained by a shake table test. It has been shown that this is a sufficient (but not a necessary) precondition to accept a numerical model. Numerical models can fail to predict the planar rocking response of a rigid block, but may succeed in predicting the statistics of the response to an ensemble of ground motions. As seismic response is inherently stochastic, comparison of the statistics of the numerically simulated response to the statistics of the experimentally obtained benchmark response for the same ensemble of earthquake excitation is a sufficient (and easier to pass) model validation test. This article describes the publicly available data of a set of 12 free rocking vibration and 115 shake table tests of six three-dimensional rocking and sliding columns, designed at ETH Zurich and performed at EQUALS Laboratory, University of Bristol. The data can be used to statistically validate different approaches that aim to model three-dimensional rocking structures.

Sign in / Sign up

Export Citation Format

Share Document