scholarly journals 2D-Hygrothermal Simulation of Historical Solid Walls

2016 ◽  
Author(s):  
Michela Pascucci ◽  
◽  
Elena Lucchi ◽  
Keyword(s):  
Hygrothermal Simulation ◽  
Solid Walls

A comparison of hygrothermal simulation results derived from four simulation tools

2021 ◽  
pp. 174425912098876
Author(s):  
Maurice Defo ◽  
Michael Lacasse ◽  
Abdelaziz Laouadi
Keyword(s):  
Relative Humidity ◽  
Outer Layer ◽  
Growth Index ◽  
Mould Growth ◽  
Simulation Tools ◽  
Assembly Design ◽  
Hygrothermal Simulation ◽  
Moisture Performance ◽  
Wood Frame ◽  
Wall Assembly

The objective of this work was to compare the hygrothermal responses and the moisture performance of four wood-frame walls as predicted by four hygrothermal (HAM) simulation tools, namely: DELPHIN, WUFI, hygIRC and COMSOL. The four wall systems differ only in their cladding type; these were fibreboard, vinyl, stucco and brick. Three Canadian cities having different climates were selected for simulations: Ottawa, Ontario; Vancouver, British Columbia and Calgary, Alberta. In each city, simulations were run for 2 years. Temperature and relative humidity of the outer layer of OSB sheathing were compared amongst the four simulation tools. The mould growth index on the outer layer of the OSB sheathing was used to compare the moisture performance predicted by the respective hygrothermal simulation tools. Temperature profiles of the outer layer of the OSB sheathing were all in good agreement for the four HAM tools in the three locations. For relative humidity, the highest discrepancies amongst the four tools were found with stucco cladding where differences as high as 20% could be found from time to time. Mould growth indices predicted by the four HAM tools were similar in some cases but different in other cases. The discrepancies amongst the different HAM tools were likely related to: the material property processing, how the quantity of wind-driven rain absorbed at the cladding surface is computed and some implementation details. Despite these discrepancies, The tools generally yielded consistent results and could be used for comparing the impacts of different designs on the risk of premature deterioration, as well as for evaluating the relative effects of climate change on a given wall assembly design.

scholarly journals Hydrodynamic Boundary Layers at Solid Wall—A Tool for Separation of Fine Solids

2021 ◽  
Vol 5 (1) ◽  
pp. 11
Author(s):  
Ljubomir Nikolov
Keyword(s):  
Relative Density ◽  
Hydrodynamic Interaction ◽  
Theoretical Study ◽  
Solid Wall ◽  
Separation Processes ◽  
Starting Point ◽  
Potential Applications ◽  
Neutrally Buoyant ◽  
Solid Walls ◽  
Solid Spheres

A theoretical study is performed about the hydrodynamic interaction of fine species entrapped in the boundary layer (BL) at solid wall (plate). The key starting point is the analysis of the disturbance introduced by solid spheres in the background fluid flow. For a neutrally buoyant entity, the type of interaction is determined by the size of the spheres as compared to the thickness of the BL region. The result is granulometric separation of the solids inside the BL domain at the wall. The most important result in view of potential applications concerns the so-called small particles Rp < L/ReL5/4 (ReL is the Reynolds number of the background flow and Rp is the radius of the entrapped sphere). In the case of non-neutrally buoyant particles, gravity interferes with the separation effect. Important factor in this case is the relative density of the solid species as compared to this of the fluid. In view of further practical uses, particles within the range of Δρ/ρ < Fr2/ReL1/2 (Fr is Froude number and Δρ/ρ is the relative density of the entrapped solids) are systematically studied. The trajectories inside the BL region of the captured species are calculated. The obtained data show that there are preferred regions along the wall where the fine solids are detained. The results are important for the assessment of the general efficiency of entrapment and segregation of fine species in the vicinity of solid walls and have high potential for further design of industrial separation processes.

THE EFFECT OF SOLID AND POROUS CHANNEL WALLS ON STEADY SWIMMING OF STEELHEAD TROUT ONCORHYNCHUS MYKISS

1993 ◽  
Vol 178 (1) ◽  
pp. 97-108 ◽  
Author(s):  
P. W. Webb
Keyword(s):  
Swimming Speed ◽  
Swimming Performance ◽  
Beat Frequency ◽  
Regression Coefficients ◽  
Steelhead Trout ◽  
Wall Effects ◽  
Fish Swimming ◽  
Wide Channel ◽  
Solid Walls ◽  
Tail Beat

Kinematics and steady swimming performance were recorded for steelhead trout (approximately 12.2 cm in total length) swimming in channels 4.5, 3 and 1.6 cm wide in the centre of a flume 15 cm wide. Channel walls were solid or porous. Tail-beat depth and the length of the propulsive wave were not affected by spacing of either solid or porous walls. The product of tail-beat frequency, F, and amplitude, H, was related to swimming speed, u, and to harmonic mean distance of the tail from the wall, z. For solid walls: FH = 1.01(+/−0.31)u0.67(+/−0.09)z(0.12+/−0.02) and for grid walls: FH = 0.873(+/−0.302)u0.74(+/−0.08)z0.064(+/−0.024), where +/−2 s.e. are shown for regression coefficients. Thus, rates of working were smaller for fish swimming between solid walls, but the reduction due to wall effects decreased with increasing swimming speed. Porous grid walls had less effect on kinematics, except at low swimming speeds. Spacing of solid walls did not affect maximum tail-beat frequency, but maximum tail-beat amplitude decreased with smaller wall widths. Maximum tail-beat amplitude similarly decreased with spacing between grid walls, but maximum tail-beat frequency increased. Walls also reduced maximum swimming speed. Wall effects have not been adequately taken into account in most studies of fish swimming in flumes and fish wheels.

Error Assessment and Error Reduction in Production-Level RANS-Based Drag Predictions

2003 ◽  
Author(s):  
Donald W. Davis ◽  
Scot A. Slimon
Keyword(s):  
Fourth Order ◽  
Grid Cell ◽  
Stretch Ratio ◽  
Error Assessment ◽  
Artificial Dissipation ◽  
Grid Approach ◽  
Parametric Studies ◽  
Drag Prediction ◽  
Richardson’S Extrapolation ◽  
Solid Walls

Assessments of the effects of several numerical parameters on RANS-based drag prediction accuracy are presented. The parameters include grid cell size adjacent to solid walls, grid stretch ratio, grid stretch transition, artificial dissipation scheme, and artificial dissipation coefficient. Results from extensive parametric studies on a two-dimensional flat plate are reported. Based on the results of these studies, guidelines for high-accuracy drag predictions using both second- and fourth-order accurate, finite-difference-based solvers are proposed. In addition, error assessments obtained with a single grid using second- and fourth-order accurate solutions are compared to multiple-grid Richardson’s extrapolation approaches. The single-grid approach is shown to provide a significant improvement in both accuracy and error assessment relative to the multiple-grid approach.

A Molecular Dynamics Study on Effects of Nanostructural Clearances at an Interface on Thermal Resistance

2008 ◽  
Author(s):  
Masahiko Shibahara ◽  
Kosuke Inoue ◽  
Kiyomori Kobayashi
Keyword(s):  
Molecular Dynamics ◽  
Temperature Gradient ◽  
Thermal Resistance ◽  
Solid Wall ◽  
Middle Layer ◽  
Dynamics Simulation ◽  
Nanometer Scale ◽  
Liquid Density ◽  
Solid Interface ◽  
Solid Walls

The classical molecular dynamics simulation was conducted in order to clarify the effects of structural clearances in nanometer scale on thermal resistance at a liquid-solid interface. A liquid molecular region confined between the solid walls, of which the interparticle potential was Lennard-Jones type, was employed as a calculation system. The solid walls consisted of three atomic layers where the temperature of the middle layer was controlled by the Langevin method. Heat flux in the system was calculated numerically by integrating the forces that acted on the temperature controlled atoms by the Langevin method. The temperature jump between the solid wall and the liquid molecular region was calculated numerically. The thermal resistance at a liquid-solid interface was calculated numerically with changing the surface structural clearances in nanometer scale. Temperature gradient and liquid density were also changed as calculation parameters. With changing the surface structural clearances from 0nm to 2.5nm the thermal resistance at the interface once decreased and became the minimum value when the structural clearances were between 0.6 to 1.0 nm. The thermal resistance between the solid and the liquid increased when the structural clearances were more than 1.0nm. With the increase of the liquid density the thermal resistance between the solid and the liquid substantially decreased regardless of the temperature gradient and the surface structures in nanometer scale.

Hygrothermal Performance and Degradation of Gypsum Houses in Different Brazilian Climates

2015 ◽  
Vol 3 ◽  
pp. 137-149 ◽  
Author(s):  
R.M.S.F. Almeida ◽  
P. Paula ◽  
A. Santos ◽  
N.M.M. Ramos ◽  
J.M.P.Q. Delgado ◽  
...  
Keyword(s):  
Simulation Software ◽  
International Standards ◽  
Computer Simulation Model ◽  
Water Absorption Coefficient ◽  
Vapour Permeability ◽  
Climatic Regions ◽  
Hygrothermal Simulation ◽  
Durability Assessment ◽  
And Performance

This work consisted of two main lines of research: one of a literature review and other of simulation. In the first part, a modular constructive system based on gypsum blocks is presented. This constructive system reduces the manpower considerably, the time of execution and the final costs of construction. However, the durability assessment should be analysed but first its implementation and performance along the country must analysed.In this work a preliminary experimental characterization of the thermal conductivity, vapour permeability and water absorption coefficient of two different samples of gypsum plasters from the northeast Brazil (plaster pole of Araripe, Pernambuco) was performed. The experimental and analytical procedures followed either international standards or well-established methodologies, supporting the analysis of gypsum walls hygrothermal behaviour. The measured properties were adopted as inputs to hygrothermal simulation software and the analysis of gypsum based exterior walls was conducted for different climate zones and exposure conditions. The study demonstrates the durability issues that may arise in each location, due to differences in hygrothermal action.The other simulation part included hygrothermal advanced modelling, using the EnergyPlus software. The numerical results carried out allow a discussion over the interior comfort and durability of this modular constructive system. In this paper, the computer simulation model and the results of a parametric analysis of the dwelling performance on the eight climatic regions defined in Brazilian regulations are presented. The model was validated using the in situ measurements of air temperature.

Sign in / Sign up

Export Citation Format

Share Document