Acquisition Performance Comparison of New Generation of GNSS BOC-modulated Signals

This paper presents performance and its simulation results of pseudonoise (PN) code acquisition scheme with MIMO scheme for an ultra-wideband time-hopping/code-division-multiple-access (UWB TH/CDMA) system. The transmission channel is modelled as a frequency selective lognormal fading channel. In almost practical PN code acquisition system, the existence of more than two synchronous cells in the uncertainty region of the search process is possible due to multipath effect. Therefore, based on deriving the detection probability, false alarm rate, miss detection probability, and mean acquisition time, the acquisition performance is analyzed under the hypothesis of multiple synchronous states (cells) in the uncertainty region of the PN code. And the code acquisition performance is evaluated when the correlator outputs are noncoherently combined by using equal gain combining (EGC) scheme. In this procedure, the closed form for the conditional probability of decision variable is derived using the Gauss-Hermite quadrature formula. The performance comparison of the scheme mentioned above shows that the code acquisition performance with the diversity combining technique, especially when increasing the number of antenna, is more robust than that using no diversity. And code acquisition performance comparison also shows that if the detection threshold is set inappropriately, the performance might be degraded, even if an antenna diversity method is applied. It is also shown that Tx diversity can improve the acquisition performance but not as much as Rx diversity does. And Rx diversity can be applied to the acquisition system for additional diversity gain if the complexity of the receiver can be accepted.

Download Full-text

Finding the Right Problems: Some HREM Applications to Interfaces

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100111938 ◽

1984 ◽

Vol 42 ◽

pp. 376-379

Author(s):

D. Cherns

Keyword(s):

Grain Boundaries ◽

High Resolution Electron Microscopy ◽

Boundary Structure ◽

Atomic Structures ◽

Grain Boundary Structure ◽

Resolution Electron ◽

Point To Point ◽

The Right ◽

New Generation ◽

Better Than

The use of high resolution electron microscopy (HREM) to determine the atomic structure of grain boundaries and interfaces is a topic of great current interest. Grain boundary structure has been considered for many years as central to an understanding of the mechanical and transport properties of materials. Some more recent attention has focussed on the atomic structures of metalsemiconductor interfaces which are believed to control electrical properties of contacts. The atomic structures of interfaces in semiconductor or metal multilayers is an area of growing interest for understanding the unusual electrical or mechanical properties which these new materials possess. However, although the point-to-point resolutions of currently available HREMs, ∼2-3Å, appear sufficient to solve many of these problems, few atomic models of grain boundaries and interfaces have been derived. Moreover, with a new generation of 300-400kV instruments promising resolutions in the 1.6-2.0 Å range, and resolutions better than 1.5Å expected from specialist instruments, it is an appropriate time to consider the usefulness of HREM for interface studies.

Download Full-text

Total etch dentin bonding systems: scanning electron microscopy of the resin-dentin hybrid layer

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100130092 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1092-1093

Author(s):

Jorge Perdigao

Keyword(s):

Composite Resin ◽

Mechanical Interlocking ◽

Hybrid Layer ◽

Agent Based ◽

Dentin Bonding ◽

Acid Agent ◽

Bond Strengths ◽

Main Component ◽

Bonding Systems ◽

New Generation

In 1955, Buonocore introduced the etching of enamel with phosphoric acid. Bonding to enamel was created by mechanical interlocking of resin tags with enamel prisms. Enamel is an inert tissue whose main component is hydroxyapatite (98% by weight). Conversely, dentin is a wet living tissue crossed by tubules containing cellular extensions of the dental pulp. Dentin consists of 18% of organic material, primarily collagen. Several generations of dentin bonding systems (DBS) have been studied in the last 20 years. The dentin bond strengths associated with these DBS have been constantly lower than the enamel bond strengths. Recently, a new generation of DBS has been described. They are applied in three steps: an acid agent on enamel and dentin (total etch technique), two mixed primers and a bonding agent based on a methacrylate resin. They are supposed to bond composite resin to wet dentin through dentin organic component, forming a peculiar blended structure that is part tooth and part resin: the hybrid layer.

Download Full-text