scholarly journals Effect of the welding parameters on residual stresses in pipe weld using numerical simulation

2020 ◽  
Vol 10 (1) ◽  
pp. 5-12
Author(s):  
Mahmood Alhafadhi ◽  
György Krállics
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Residual Stresses ◽  
Welding Current ◽  
Hardness Measurement ◽  
Welding Parameter ◽  
Welding Parameters ◽  
Residual Stress Field ◽  
Residual Welding Stress ◽  
Welding Stress

The objective of this article is to predict the residual welding stress in a dissimilar pipe weld. The 2D model, instead of 3D was used to reduce the time and cost of the numerical calculation. The 2D numerical simulation MSC MARC code is used to predict the residual stress developed during pipe welding. The present model was validated using hardness measurement. Good agreement was found between the measurement and numerical simulation results. The effects of welding parameters on residual stress field on the outer and inner surface were assessed. The effect of welding parameter (welding current) is examined. The axial and hoop residual stresses in dissimilar pipe joints of different thickness for pipe weld were simulated in outer and inner surfaces. When the other parameters remain fixed, and the current has great effect on the weld shape and size, and then affects the residual stress level significantly.

scholarly journals Prediction and numerical simulation of residual stress in multi-pass pipe welds

2021 ◽  
Author(s):  
Mahmood Hasan Al-Hafadhi ◽  
Gyorgy Krallics
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Residual Stresses ◽  
Hardness Test ◽  
Element Model ◽  
Good Prediction ◽  
Two Dimensional ◽  
Residual Welding Stress ◽  
Welding Stress ◽  
Simulation Results

AbstractA numerical simulation procedure is presented to predict residual stress states in multi-pass welds in oil transportation pipes. In this paper, a two-dimensional thermo-mechanical finite element model is used to calculate the temperature distribution, hardness, and the distribution of residual stresses during multi-pass welding of pipes of dissimilar metals and varying thicknesses. In this model, the temperature dependence of the thermal and mechanical properties of the material was considered. The present model was validated using the hardness measurement. Good agreement was found between the measurement and the numerical simulation results. The simulated result shows that the two-dimensional model can be effectively used to simulate the hardness test and predict the residual stress in the pipe weld. The simulation results and measurements suggest that the model with moving heat source can obtain a good prediction of residual welding stress. Both the two-dimensional and the three-dimensional modeling can be used to estimate the residual stresses in different weld regions and help saving time.

Welding Residual Stress's Numerical Simulation and Relieving of Guyed Mast Earplate Joint Substructure

2011 ◽  
Vol 216 ◽  
pp. 218-222 ◽  
Author(s):  
Wen Li Wang ◽  
Wei Lian Qu ◽  
Jie He
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Temperature Field ◽  
Stress Field ◽  
Residual Stresses ◽  
Welding Residual Stress ◽  
Welding Stress ◽  
Welding Temperature ◽  
Joint Properties ◽  
Guyed Mast

The dynamic stress-strain and welding residual stress during welding are the significant factors which lead to welded cracking and debasement of the joint properties. Therefore, the welding residual stresses are still very importang problems.A large number of guyed mast accidents study shows that the welded joints of earplate and shaft were easily to be destroyed. Therefore, the accurate assessment of the guyed maste earplate joint substructure’s welding residual stress is of great significance. The theory and method of simulation of the welding temperature field and welding stress field by finite element method is first introduced, and then the earplate substructure refine model is established which was up to the welding numerical simulation. Based on ANSYS software’s APDL language to apply the welding heat source load, we can get and save the welding temperature field results at each time. Conversing the thermal analysis element into structure element to finish the caculation of the welding stress field. Eventually by adopting the elimination remnant technology to remove the part of welding residual stresses, we can got the final welding residual stress in different relieving proportion.

Numerical Simulation of Residual Stresses Induced from Shot Peening with Finite Element Method

2013 ◽  
Vol 433-435 ◽  
pp. 1898-1901
Author(s):  
Li Juan Cao ◽  
Shou Ju Li ◽  
Zi Chang Shangguan
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Residual Stress ◽  
Surface Layer ◽  
Residual Stresses ◽  
Shot Peening ◽  
Target Material ◽  
Residual Stress Field ◽  
State Of Stress ◽  
Compressive Residual Stresses

Shot peening is a manufacturing process intended to give components the final shape and to introduce a compressive residual state of stress inside the material in order to increase fatigue life. The modeling and simulation of the residual stress field resulting from the shot peening process are proposed. The behaviour of the peened target material is supposed to be elastic plastic with bilinear characteristics. The results demonstrated the surface layer affected by compressive residual stresses is very thin and the peak is located on the surface.

Assessment of the Crack Compliance Method and the Introduction of Residual Stresses by Shot Peening Using the Finite Element Method

2009 ◽  
Vol 15 ◽  
pp. 109-114 ◽  
Author(s):  
G. Urriolagoitia-Sosa ◽  
E. Zaldivar-González ◽  
J.M. Sandoval Pineda ◽  
J. García-Lira
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Stress Field ◽  
Residual Stresses ◽  
Shot Peening ◽  
Working Life ◽  
The Finite Element Method ◽  
Residual Stress Field ◽  
Main Effect

The interest on the application of the shot peening process to arrest and/or delay crack growth is rising. The main effect of the shot peening technique is to introduce a residual stress field that increases the working life of mechanical components. In this paper, it is presented the numerical simulation (FEM) of the shot peening process and the effect of introducing a residual stress field. Besides, the consequence of changing the sizes of the impacting ball is analyzed. This work also used the Crack Compliance Method (CCM) for the determination of residual stresses in beams subjected to a numerical simulation of a shot peening process. The numerical results obtained provide a quantitative demonstration of the effect of shot peening on the introduction of residual stresses by using different sizes of impacting balls and assess the efficiency of the CCM.

scholarly journals Evaluation of the Impact of Residual Stresses in Crack Initiation with the Application of the Crack Compliance Method Part I, Numerical Analysis

2010 ◽  
Vol 24-25 ◽  
pp. 253-259 ◽  
Author(s):  
G. Urriolagoitia-Sosa ◽  
B. Romero-Ángeles ◽  
Luis Héctor Hernández-Gómez ◽  
G. Urriolagoitia-Calderón ◽  
Juan Alfonso Beltrán-Fernández ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Numerical Analysis ◽  
Stress Field ◽  
Crack Initiation ◽  
Residual Stresses ◽  
Main Concern ◽  
Residual Stress Field ◽  
Set Up ◽  
The Impact

The understanding of how materials fail is still today a fundamental research problem for scientist and engineers. The main concern is the assessment of the necessary conditions to propagate a crack that will eventually lead to failure. Nevertheless, this kind of analysis tends to be more complicated, when a prior history in the material is taken into consideration and it will be extremely important to recognize all the factors involved in this process. In this work, a numerical simulation of the introduction of residual stresses, which change the crack initiation conditions, in a modified compact tensile specimen to change the condition of crack initiation is presented. Four numerical analyses were carried out; an initial evaluation was performed in a specimen without a crack and it was used for the estimation of a residual stress field produced by an overload; three more cases were simulated and a crack was introduced in each specimen (1 mm, 5 mm and 10 mm, respectively). The overload was then applied to set up a residual stress field into the component; furthermore, in each case the crack compliance method (CCM) was applied to measure the induced residual stress field. By performing this numerical simulation, the accuracy of the crack compliance method can be evaluated. On the other hand, elastic-plastic finite element analysis was utilized for the residual stress estimation. The numerical analysis was based on the mechanical properties of a biocompatible material (AISI 316L). The obtained results provided significant data about diverse factors, like; the manner in which a residual stress field could modify the crack initiation conditions, the convenient set up for induction of a beneficial residual stresses field, as well as useful information that can be applied for the experimental implementation of this research.

scholarly journals EFFECTS OF WELDING CURRENT AND SPEED ON RESIDUAL STRESS AND DISTORTION OF JOINING ST52 ROLLED PLATE IN DIFFERENT WELDING SEQUENCES

2020 ◽  
Vol 3 (2) ◽  
pp. 40-45
Author(s):  
Ali Aminifar ◽  
Alireza M. Haghighi
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Three Dimensional ◽  
Welding Current ◽  
Element Model ◽  
Rolled Plate ◽  
Main Step ◽  
Welding Parameters ◽  
Effective Parameters ◽  
Welding Sequences

Welding is a process of permanent joining parts by different welding methods. Residual stress and distortion are the most common phenomena of this process. Reduction of the residual stresses, distortion and improving the quality of welding are the important subjects of this field. Determining and analyzing the residual stresses and distortion is the main step for these purposes. Welding sequences, speed and current are the most effective parameters of this process. In this study, effects of welding parameters such as welding speed and current, in order to reduce residual stress and distortion of welding ST52 rolled plate in different welding sequences have been studied with three-dimensional thermo-mechanical finite element model by means of ANSYS APDL. By comparing different considered situations, the most efficient welding methods with the least residual stress and distortion by considering different welding sequences have been suggested. It obtains that welding the ST52 rolled plate from edge to edge with higher current and lower speed is the best option in fatigue and load-bearing situations, and welding from the center to both sides simultaneously with lower current and higher speed is the best option for assembly problems.

FEM assessment of the local side compression technique efficiency as applicable for notched prismatic specimens

2021 ◽  
pp. 182-191
Author(s):  
K. E. Sadkin ◽  
V. Yu. Filin ◽  
A. V. Mizetsky ◽  
E. D. Nazarova
Keyword(s):  
Residual Stress ◽  
Base Metal ◽  
Crack Front ◽  
Fem Simulation ◽  
Residual Stress Field ◽  
Compression Technique ◽  
Residual Welding Stress ◽  
Welding Stress ◽  
Validity Criteria ◽  
Local Side

A crack front straightness is one of the test result validity criteria for fatigue precracked static fracture toughness specimens. Actually, the ideally straight crack front cannot be reached due to the presence of residual stress. This is particularly actual for specimens cut out of welded joints containing the residual welding stress (RWS). One of the techniques allowing to lower the RWS effect is a local side compression of specimens. Its efficiency has been proved in physical testing however no quantitative assessments are known in the literature. This work comprises FEM simulation of welding, sampling and side compression processes. The effect of local compression on base metal containing no residual stress is also investigated.It has been found that in the course of local side compression the initial residual stress field caused by welding and specimen making is replaced by another field showing stress gradients more favourable for getting the fatigue crack shape meeting the validity criteria of test results as per approved test methods. The calculation results show that the complete removal of residual stress as in base metal as in welded specimens is not feasible in the range of actual practicable degrees of compression.

Numerical Simulation of Residual Stresses Due to Cladding Process

2007 ◽  
Author(s):  
Dieter Siegele ◽  
Marcus Brand
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Finite Element ◽  
Stress Field ◽  
Residual Stresses ◽  
Base Metal ◽  
Base Material ◽  
Pressure Vessels ◽  
Measured Temperature ◽  
Residual Stress Field

The inner surface of reactor pressure vessels is protected against corrosion by an austenitic cladding. Generally, the cladding is welded on the ferritic base metal with two layers to avoid sub-clad cracks and to improve the microstructure of the cladding material. On the other hand, due to the cladding process and the difference of the thermal expansion coefficient of the austenitic cladding and the ferritic base material residual stresses act in the component. This residual stress field is important for assessing crack postulates in the cladding or subclad flaws in the base metal. For the determination of the residual stress field, plates of RPV steel were cladded and heat treated representative to the RPV relevant conditions. During the cladding process the temperature and distortion were measured as basis for the validation of the finite element simulations. The numerical simulation was performed with the finite element code SYSWELD. The heat source of the model was calibrated on the measured temperature profile. In the analysis, the temperature dependent material properties as well as the transformation behavior of the ferritic base metal were taken into account. The calculated residual stresses show tensile stresses in the cladding followed by compressive stresses in the base metal that are in agreement with measurements with X-ray diffraction technique.

scholarly journals Residual stresses in thermite welded rails: significance of additional forging

2020 ◽  
Vol 64 (7) ◽  
pp. 1195-1212
Author(s):  
B. Lennart Josefson ◽  
R. Bisschop ◽  
M. Messaadi ◽  
J. Hantusch
Keyword(s):  
Residual Stress ◽  
Stress Field ◽  
Residual Stresses ◽  
Weld Metal ◽  
Welding Process ◽  
Surface Zone ◽  
Fe Model ◽  
Uneven Surface ◽  
Residual Stress Field ◽  
High Dynamic

Abstract The aluminothermic welding (ATW) process is the most commonly used welding process for welding rails (track) in the field. The large amount of weld metal added in the ATW process may result in a wide uneven surface zone on the rail head, which may, in rare cases, lead to irregularities in wear and plastic deformation due to high dynamic wheel-rail forces as wheels pass. The present paper studies the introduction of additional forging to the ATW process, intended to reduce the width of the zone affected by the heat input, while not creating a more detrimental residual stress field. Simulations using a novel thermo-mechanical FE model of the ATW process show that addition of a forging pressure leads to a somewhat smaller width of the zone affected by heat. This is also found in a metallurgical examination, showing that this zone (weld metal and heat-affected zone) is fully pearlitic. Only marginal differences are found in the residual stress field when additional forging is applied. In both cases, large tensile residual stresses are found in the rail web at the weld. Additional forging may increase the risk of hot cracking due to an increase in plastic strains within the welded area.

Estimation of Residual Stress in Spiral Welded Pipe: Regression and Numerical Model

2012 ◽  
Author(s):  
Abul Fazal M. Arif ◽  
Ahmad S. Al-Omari ◽  
Anwar K. Sheikh ◽  
Yagoub Al-Nassar ◽  
M. Anis
Keyword(s):  
Residual Stress ◽  
Residual Stresses ◽  
Critical Role ◽  
Large Diameter ◽  
Element Model ◽  
Regression Equation ◽  
Field Analysis ◽  
Welding Parameters ◽  
Splitting Test ◽  
Welded Pipe

Double submerged spiral-welded pipe (SWP) is used extensively throughout the world for large-diameter pipelines. Fabrication-induced residual stresses in spiral welded pipe have received increasing attention in gas, oil and petrochemical industry. Several studies reported in the literature verify the critical role of residual stresses in the failure of these pipes. Therefore, it is important that such stresses are accounted for in safety assessment procedures such as the British R6 and BS7910. This can be done only when detailed information on the residual stress distribution in the component is known. In industry, residual stresses in spiral welded pipe are measured experimentally by means of destructive techniques known as Ring Splitting Test. In this study, statistical analysis and linear-regression modeling were used to study the effect of several structural, material and welding parameters on ring splitting test opening for spiral welded pipes. The experimental results were employed to develop an appropriate regression equation, and to predict the residual stress on the spiral welded pipes. It was found that the developed regression equation explains 36.48% of the variability in the ring opening. In the second part, a 3-D finite element model is presented to perform coupled-field analysis of the welding of spiral pipe. Using this model, temperature as well as stress fields in the region of the weld edges is predicted.

Sign in / Sign up

Export Citation Format

Share Document