scholarly journals The Effect of Sugarcane Bagasse and Filter Mud Compost Fertilizer and Manure Application on the Growth and Production of Sugarcane

2019 ◽  
pp. 338-345
Author(s):  
Mr Rahmad ◽  
Laode Asrul ◽  
Tutik Kuswinanti ◽  
Yunus Musa
Keyword(s):  
Plant Height ◽  
Sugarcane Bagasse ◽  
Block Design ◽  
Segment Length ◽  
Stem Height ◽  
Randomized Block Design ◽  
Sugarcane Productivity ◽  
Sugarcane Stem ◽  
Number Of Segments ◽  
Filter Mud

Sugarcane requires land conditions that contain high organic matter to support growth and production. Giving compost from the results of the utilization of the byproducts of sugarcane processing in the form of bagasse and filter mud is expected to increase the sugarcane productivity. The purpose of this study was to determine the effect of compost from the sugarcane bagasse, filter mud and cow manure using the decomposer and Trico Plus mushroom consortium on the growth and production of sugarcane. The experiment was carried out in the form of a randomized block design consisting of eight treatments and three replications. Each treatment was applied as much as 15 tons per hectare, NPK basic fertilizer for all 350 kg treatments per hectare. The results showed that the treatment of compost provides a higher number of sugarcane saplings compared to without the provision of compost. The compost C treatment gave the highest number of sugarcane saplings and the highest number of segments of 7.45 sugarcane saplings and 18.33 segments. Treatment G gave the highest plant height of 283.30 cm, treatment B gave the highest segment length of 15.17 cm, stem diameter of 2.62 cm, stem height of 163.00 cm, sugarcane stem weight of 158.36 kg per plot and 97.655 tons per hectare and POL value 31.32% while treatment E gave the highest Briks value of 23.43%. G treatment gave the best plant height value of 283.30 cm. Giving compost from the results of mixing bagasse, filter mud and manure using the mushroom and Trico Plus consortiums gave better results on growth, and production of sugar cane compared to without the provision of compost.

scholarly journals PENGARUH PEMBERIAN ZAT PENGATUR TUMBUH ALAMI TERHADAP PERTUMBUHAN STEK STEVIA (Stevia rebaudiana B.)

2019 ◽  
Vol 7 (2) ◽  
pp. 138
Author(s):  
Natalia Lusianingsih Sumanto ◽  
Ardian Eleonard Purba
Keyword(s):  
Plant Height ◽  
Root Length ◽  
Block Design ◽  
Stevia Rebaudiana ◽  
Coconut Water ◽  
Stem Height ◽  
Onion Extract ◽  
Randomized Block Design ◽  
Number Of Leaves

This study aims to determine the effect of the concentration of coconut water and onion extract on the growth of stevia plant cuttings. The research was conducted in Juli until November 2019 in trial garden of the Politeknik Wilmar Bisnis Indonesia. This research uses factorial randomized block design. The first factors are concentration of coconut water consisting of five levels is AK0 = control, AK1 = coconut water 25%, AK2 = coconut water 50%, AK3 = coconut water 75% and AK4 = coconut water 100%. The second factor was the treatment of onion extract consisting of five treatments namely BM0 = control, BM1 = concentration of onion extract 25%, BM2 = concentration of onion extract 50%, BM3 = concentration of onion extract 75% and BM4 = concentration of onion extract 100%. Observation of the percentage of live cuttings, stem height, number of leaves and root length was done at 2 MST, 3 MST and 4 MST. The highest percentage of cuttings found in plants treated with 100% coconut water and onion extract, the highest plant height was found in the treatment of 100% concentration of coconut water and onion extract (3 MST and 4 MST), the highest number of leaves found in the treatment 100% concentration of coconut water and shallot extract (3 MST) and the highest root length was found in the treatment of 100% concentration of coconut water and shallot extract (2 MST, 3 MST and 4 MST).

PENGARUH KOMPOS SAMPAH KOTA DAN PUPUK KANDANG SAPI TERHADAP PERTUMBUHAN DAN HASIL TANAMAN PAKCOY (BRASSICA RAPA, L. CHINENSIS) PADA ALUVIAL KABUPATEN INDRAMAYU

2018 ◽  
Vol 9 (2) ◽  
pp. 153-163
Author(s):  
Wiwik Ambarsari ◽  
Henly Yuliana
Keyword(s):  
Plant Height ◽  
Brassica Rapa ◽  
Block Design ◽  
Cattle Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Two Factors ◽  
Number Of Leaves ◽  
Experimental Garden

The study aimed to determine the effect of the combination of city waste compost and cattle manure on the growth and yield of pakcoy plants (Brassica rapa, L. Chinensis) in Aluvial, Indramayu Regency. The study was conducted at the Experimental Garden of the Faculty of Agriculture, Wiralodra University, Indramayu Regency from March to August 2018. This study used Factorial Pattern Randomized Block Design with two factors. The first factor is city waste compost and the second factor is cattle manure with 4 levels: 0%, 3.0%, 6.0%, and 9.0%, repeated twice. The results showed that there was an independent influence between city waste compost and cattle manure on plant height and number of leaves. The best combination to increase the feasibility weight of pakcoy consumption is by giving city waste compost 9.0% (S4) and cattle manure 6.0% (K3).

scholarly journals Insights into the Positive Effect of Pyraclostrobin on Sugarcane Productivity

Agronomy ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 122 ◽  
Author(s):  
Amanda Moreira Lopes ◽  
Pedro Schumacher ◽  
Aurora Terylene Pérez Martínez ◽  
Antônio Paulino da Costa Netto ◽  
Antonio Chalfun-Junior
Keyword(s):  
Block Design ◽  
Positive Influence ◽  
Randomized Block Design ◽  
Rate Of Photosynthesis ◽  
Enzyme Superoxide Dismutase ◽  
Management Techniques ◽  
Stalk Yield ◽  
Sugarcane Productivity ◽  
High Yields ◽  
Positive Effect

Achieving high yields is a challenge for sugarcane producers due to the diverse environmental conditions to which the crop is subjected. In tropical and subtropical regions, where sugarcane is typically cultivated, crop diseases are common. This necessitates the development of disease management techniques. Among these techniques, chemical control is of particular significance due to the development of new antifungal agents, such as pyraclostrobin. For some crops, pyraclostrobin has a positive influence on yield due to its effects on plant physiology. The aim of this study was to evaluate the physiological responses and yield of three sugarcane cultivars treated with the fungicide, pyraclostrobin. The experiment was performed in a randomized block design (RBD) with a split-plot arrangement; the variables analyzed were the application or non-application of fungicide in the plots and, in the subplots, the evaluation times after fungicide application. Both the rate of photosynthesis and the antioxidant enzyme (Superoxide Dismutase, Catalase and Ascorbate Peroxidades) activity increased in plants treated with fungicide in comparison to untreated plants, and in the RB855156 cultivar the stomatal conductance, transpiration, and nocturnal respiratory rate were increased. Furthermore, application of pyraclostrobin increased stalk yield and the green biomass index in the RB855156 and RB86751 sugarcane cultivars. In certain cultivars of sugarcane, application of pyraclostrobin leads to an increased yield.

scholarly journals Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2399 ◽  
Author(s):  
Diogo Brito de Almeida ◽  
José Geraldo Barbosa ◽  
José Antônio Saraiva Grossi ◽  
Fernando Luiz Finger ◽  
Joice Crescencio Heidemann
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Cut Flowers ◽  
Floral Buds ◽  
Randomized Block Design ◽  
Commercial Harvest ◽  
Physiological Phenomenon ◽  
Cold Chamber ◽  
The Impact

Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C) constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm), subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season), the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in cold chamber enable greater production of flowers and the highest stem height, factors that favor the increase in market value.

scholarly journals Yield and vegetative growth of cactus pear at different spacings and under chemical fertilizations

2016 ◽  
Vol 20 (6) ◽  
pp. 564-569 ◽  
Author(s):  
João A. da Silva ◽  
Sérgio L. R. Donato ◽  
Paulo E. R. Donato ◽  
Evilasio dos S. Souza ◽  
Milton C. Padilha Júnior ◽  
...  
Keyword(s):  
Plant Growth ◽  
Plant Height ◽  
Vegetative Growth ◽  
Dry Matter ◽  
Block Design ◽  
Plant Age ◽  
Cactus Pear ◽  
Area Index ◽  
Randomized Block Design

ABSTRACT The objective was to evaluate the effect of different spacings and mineral fertilizations on cactus pear growth and production in a randomized block design, with three replicates, in a 3 x 4 factorial scheme: three spacings, 1.00 x 0.50 m, 2.00 x 0.25 m and 3.00 x 1.00 x 0.25 m, and four fertilizations, 000-000-000, 000-150-000, 200-150-000 and 200-150-100 kg ha-1 of N, P2O5 and K2O, respectively. Plant growth was evaluated between 90 and 390 days and production and growth were evaluated at 620 days after planting. There were significant interactions between spacing and fertilization for plant height, number of cladodes and cladode area index from 90 to 390 days and for production of fresh and dry matter at 620 days after planting. Spacing influenced cladode area index, while fertilization influenced plant height, number of cladodes and cladode area index at 620 days after planting. Plant height showed cubic effect for the days after planting. Number of cladodes and cladode area index were dependent on spacing, fertilization and plant age, and fitted to cubic models. The best results of growth and production of fresh and dry matter are associated with NPK and NP fertilizations and the spacing of 1.00 x 0.50 m.

scholarly journals Response of growth and yield of two soybean varieties to seed pre-treatment applications

2021 ◽  
Vol 883 (1) ◽  
pp. 012052
Author(s):  
N Herawati ◽  
A R Aisah ◽  
I Mardian ◽  
B N Hidayah ◽  
B T R Erawati
Keyword(s):  
Plant Height ◽  
Seed Treatment ◽  
Seed Quality ◽  
Block Design ◽  
Growth And Yield ◽  
Agronomic Crops ◽  
Randomized Block Design ◽  
Two Factors ◽  
Pre Treatment ◽  
Four Levels

Abstract Plant growth is influenced by seed quality. Seeds need to be treated to prevent pest and disease disorders or to increase seed germination. Soybean planting was carried out in this study by the treatment of varieties and seed pre-treatment application before planting. The study aimed to measure the growth and yield of soybeans by varieties and seed treatment before planting, carried out in the Village of Nggembe, District of Bolo, Bima Regency. The study used factorial randomized block design with two factors. The first factor was soybean varieties consisting of two levels, namely Devon and Dena varieties, and the second factor was the application of pre-planting seed treatments consisting of four levels namely Cruiser, Marshall, Agrisoy, and without seed treatment, each treatment was repeated three times. Observations were made on the performance of agronomic crops and soybean yields. The results showed that the treatment of soybean varieties and the application of seed treatment had a significant influence on plant height and soybean productivity, and both treatments had interactions on parameters of plant height, number of filled pods, weight of 100 seeds, and soybean productivity with the best results successively produced by a combination of Devon-Control, Devon-Marshall, Devon-Agrisoy, and Dena-Cruiser.

scholarly journals Genetic Analysis of Some Genotypes of Indian Mustard (Brassica juncea L.) for Yield and Yield Attributing Traits

2021 ◽  
pp. 51-60
Author(s):  
A. M. Pradhan ◽  
M. Roy Choudhury ◽  
A. Sawarkar ◽  
S. Das
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Indian Mustard ◽  
Correlation Study ◽  
Biotic And Abiotic Stress ◽  
Randomized Block Design ◽  
Additive Gene ◽  
Positive Direct

The current investigation was carried out to examine the selection criteria for yield improvement in selected genotypes of Indian mustard. Twenty-four genotypes of Indian mustard were evaluated for seed yield and yield attributing characters with randomized block design with three replications. The analysis of variance showed significant differences among all the 24 genotypes against all the characters. The phenotypic and genotypic coefficient of variation were higher for most of the traits like seed yield per plant, number of secondary branches per plant and number of siliquae per plant. High heritability coupled with high genetic advance in percent of mean was registered for number of siliquae per plant, number of primary and secondary branches per plant, plant height, 1000 seed weight, siliqua length per plant and seed yield per plant suggesting predominant role of additive gene action for expression of these traits. The correlation study revealed that seed yield per plant was positively and significantly correlated with number of primary and secondary branches per plant, number of siliquae per plant, siliqua length per plant and 1000 seed weight at both phenotypic and genotypic level. The traits namely, number of secondary branches per plant recorded as highest positive direct effect followed by number of seeds per siliqua, number of siliquae per plant and plant height. Therefore, they may be carried out further evaluation in multilocational trials, biotic and abiotic stress like environmental conditions to check their stability and adaptability.

scholarly journals Optimasi Dosis Pupuk Kandang Ayam dan NPK pada Budidaya Kubis Bunga (Brassica oleracea var. Botrytis L.)

2021 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Irpan Gunawan ◽  
Atak Tauhid ◽  
Isna Tustiyani
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Block Design ◽  
Chicken Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Two Factors ◽  
Number Of Leaves ◽  
Npk Fertilizer

<p><em>Cauliflower is one of the vegetables for consumers. The demand for cauliflower was rising so it must be scaled up with fertilizer. The purpose of this study was to study the effect of chicken manure and NPK fertilizer on the growth and yield of cauliflower. The study was conducted in Sukasenang Village, Banyuresmi Sub-district, Garut Regency from July to August 2019. The study used a Randomized Block Design (RBD) in two factors each of the 3 rates with 2 replications. The first factor was the rates of chicken manure which consisted of 0, 10 and 20 tons ha<sup>-1</sup>; the second factor was NPK fertilizer which consists of 0, 100 and 200 kg ha<sup>-1</sup>. The parameter of this research was plant height, number of leaves, leaf area, weight and diameter crud. The results showed that there was no interaction between the chicken manure and NPK fertilizer. The treatment of 20 tons ha<sup>-1</sup> chicken manure affected the variable plant height, the number of leaves and leaf area. The rates of 200 kg ha<sup>-1</sup> NPK fertilizer had affected plant height, number of leaves, weight and diameter crud.</em></p>

scholarly journals Control of Conyza spp. with sequential application of glufosinate in soybean pre-sowing

2020 ◽  
Vol 50 (9) ◽  
Author(s):  
Alfredo Junior Paiola Albrecht ◽  
Leandro Paiola Albrecht ◽  
André Felipe Moreira Silva ◽  
Romulo Augusto Ramos ◽  
Natália Buttini Corrêa ◽  
...  
Keyword(s):  
Plant Height ◽  
Seed Production ◽  
Management System ◽  
Block Design ◽  
Agronomic Performance ◽  
General Control ◽  
Crop Injury ◽  
Randomized Block Design ◽  
Soybean Plants

ABSTRACT: Conyza spp. is among the main weeds reported worldwide. Due to its aggressiveness, such as high seed production and dispersion, and the growing reports of biotypes resistant to glyphosate, paraquat, and other herbicides, different control practices are required. Thus, this study aimed to evaluate the efficacy of herbicides with sequential application of glufosinate in soybean pre-sowing for control of Conyza spp. with indicative of resistant to paraquat. The study was carried out in the field, at Assis Chateaubriand and Palotina, state of Paraná, Brazil, in the 2018/19 season. The experiments were conducted in a randomized block design with four replications. The treatments consisted in application of glyphosate, 2,4-D, saflufenacil, glufosinate, saflufenacil/imazethapyr, diclosulam, paraquat/diuron, paraquat and imazethapyr/flumioxazin, at different combinations, in soybean pre-sowing. Control of Conyza spp., crop injury to soybean plants and variables related to agronomic performance (plant height and yield) were evaluated. All treatments were selective for soybean, which showed stronger crop injury in the presence of diclosulam herbicide, but this did not compromise soybean agronomic performance. In general, control levels were high for the treatments used. Except for paraquat treatments, in the area with the highest frequency of Conyza spp. with indicative of resistant to paraquat, and imazethapyr/flumioxazin treatment in both areas. These control results emphasized the importance of glufosinate in this management system and showed promising results for saflufenacil/imazethapyr.

scholarly journals GENETIC VARIABILITY, HERITABILITY AND EXPECTED GENETIC ADVANCES OF QUANTITATIVE CHARACTERS IN F2 PROGENIES OF SOYBEAN CROSSES

2014 ◽  
Vol 15 (1) ◽  
pp. 11
Author(s):  
Lukman Hakim ◽  
Suyamto Suyamto ◽  
Eman Paturohman
Keyword(s):  
Plant Height ◽  
Seed Size ◽  
Block Design ◽  
Genetic Advance ◽  
Genetic Progress ◽  
Early Maturity ◽  
Plant Seed ◽  
Randomized Block Design ◽  
Days To Maturity ◽  
Coefficient Of Variability

The F2 progenies of crosses among three soybean varieties were evaluated with their parents at Ngale Experimental Farm, Ngawi, East Java during the dry season of 2011. The experi-ment was conducted in a randomized block design with three replications. The seeds of each F2 progenies and parents were planted in two rows of 4.5 m long. Plant spacing was 40 cm x 15 cm and each hill contained one plant. Among the characters studied, seed weight per plant, number of pods per plant and days to maturity had the highest coefficient of variability with the means of 52.6%, 48.2% and 41.9%, respectively. Whereas seed size, plant height and number of reproductive nodes had moderate values of 36.9%, 35.5% and 37.4%, respectively. Number of branches and days to flowering had the lowest variability of 11.7% and 15.3%, respectively. Number of pods per plant, days to maturity, plant height and seed size had high mean estimates of heritability coupled with high genetic advance. The genetic progress of these characters that would be obtained for one generation of selection was estimated 47.2%, 45.7%, 40.9% and 40.3%, respectively. Among the agronomic characters, plant height, number of pods per plant, seed size and days to maturity had the highest coefficient of variability associated with high heritability and genetic advance. Therefore, selection for high yielding with early maturity soybean genotypes based on plant height, number of pods per plant and seed size might be possible.

Sign in / Sign up

Export Citation Format

Share Document