scholarly journals Surface Grinding Parameters Optimization of Austenitic Stainless Steel (AISI 304)

2020 ◽  
pp. 511-515
Author(s):  
Tushar Khule ◽  
Rahul Naravade ◽  
Sagar Shelke
Keyword(s):  
Surface Roughness ◽  
Large Scale ◽  
Metal Removal ◽  
Removal Rate ◽  
Parameters Optimization ◽  
Surface Grinding ◽  
Machining Process ◽  
Project Work ◽  
Depth Of Cut ◽  
Set Up

The assembling procedure of surface grinding has been set up in the large scale manufacturing of thin, rotationally even parts. Due to the complex set-up and geometrical, kinematical, dynamical influence parameters, surface grinding is rarely applied within limited-lot production. Surface crushing is a basic procedure for last machining of parts requiring smooth surfaces and exact resiliences.As contrasted and other machining forms, crushing is exorbitant activity that ought to be used under ideal conditions.. Although widely used in industry. The project work takes the following input processes parameters namely Work speed, feed rate and depth of cut. The main objective of this work is to predict the grinding behaviour and achieve optimal operating processes parameters. A software package is utilized which integrates these various models to simulate what happens during surface grinding processes. Predictions from this simulation will be further analysed by calibration with actual data. The main objective in any machining process is to maximize the Metal Removal Rate (MRR) and to minimize the surface roughness (Ra). In order to optimize these values Taguchi method, ANOVA is used. The surface roughness (Ra) value and Material Removal Rate (MRR), obtained from experimentation and confirmation test, for this the optimum control parameters are analysed.

scholarly journals Optimization of Process Parameter of Surface Grinding Process of Autenitic Stainless Steel (AISI 304) BY Taguchi Method

2019 ◽  
pp. 72-76
Author(s):  
M. A. Deore ◽  
R. S Shelke
Keyword(s):  
Taguchi Method ◽  
Feed Rate ◽  
Metal Removal ◽  
Removal Rate ◽  
Surface Grinding ◽  
Machining Process ◽  
Depth Of Cut ◽  
Work Piece ◽  
Grinding Process ◽  
Machining Processes

The manufacturing process of surface grinding has been established in the mass production of slim, rotationally symmetrical components. Due to the complex set-up, which results from the large sensitivity of this grinding process to a multiplicity of geometrical, kinematical and dynamical influence parameters, surface grinding is rarely applied within limited-lot production. The substantial characteristics of this grinding process are the simultaneous guidance and machining of the work piece on its periphery. Surface grinding is an essential process for final machining of components requiring smooth surfaces and precise tolerances. As compared with other machining processes, grinding is costly operation that should be utilized under optimal conditions. Although widely used in industry, grinding remains perhaps the least understood of all machining processes. The proposed work takes the following input processes parameters namely Work speed, feed rate and depth of cut. The main objective of this work is to predict the grinding behavior and achieve optimal operating processes parameters. a software package may be utilized which integrates these various models to simulate what happens during surface grinding processes. predictions from this simulation will be further analyzed by calibration with actual data. It involves several variables such as depth of cut, work speed, feed rate, chemical composition of work piece, etc. The main objective in any machining process is to maximize the Metal Removal Rate (MRR) and to minimize the surface roughness (Ra). In order to optimize these values Taguchi method, ANOVA and regression analysis is used.

Optimization of MRR and Surface Roughness of AlMg3 (AA5754) Alloy in CNC Lathe Machine by Using Taguchi Method

2018 ◽  
Vol 877 ◽  
pp. 110-117 ◽  
Author(s):  
Poornesh Kumar Chaturvedi ◽  
Harendra Kumar Narang ◽  
Atul Kumar Sahu
Keyword(s):  
Surface Roughness ◽  
Taguchi Method ◽  
Metal Removal ◽  
Removal Rate ◽  
Surface Condition ◽  
Point Of View ◽  
Depth Of Cut ◽  
Metal Removal Rate ◽  
Cnc Lathe ◽  
Lathe Machine

Quality of the product is the major concern in manufacturing industries from customers as well as producers point of view. There are number of factors in the product such as surface condition, height, weight, length, width etc., which may be consider for the measurement of the quality. Surface roughness and Metal Removal Rate (MRR) are the two main outcomes on which numerous researchers have applied different approaches for several years to get optimum results. In this study, Taguchi Method is applied for getting optimum parameters settings for Surface roughness and Metal Removal Rate (MRR) in case of turning AlMg3 (AA5754) in CNC Lathe machine, which is an aluminum alloy having diameter 20 mm and length 100 mm. The three parameters i.e. spindle speed, feed rate and depth of cut with 3 levels are taken as the process variables and the working ranges of these parameters for conducting experiments are selected based on Taguchi’s L9 Orthogonal Array (OA) design. To analyze the significant process parameters; main effect plots for data means and for S/N ratio are generated using Minitab statistical software.

scholarly journals Multi-Objective Process Parameter Optimization for Surface Roughness and Material Removal Rate in Face Milling of Al 6061 T6 Alloy

2019 ◽  
Vol 9 (2) ◽  
pp. 137-142
Keyword(s):  
Surface Roughness ◽  
Process Parameters ◽  
Material Removal Rate ◽  
Feed Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Face Milling ◽  
Machining Process ◽  
Depth Of Cut ◽  
Al 6061

This study uses Taguchi methodology and Gray Relational Analysis approach to explore the optimization of face milling process parameters for Al 6061 T6 alloy.Surface Roughness (Ra), Material Removal Rate (MRR) has been identified as the objective of performance and productivity.The tests were performed by selecting cutting speed (mm / min), feed rate (mm / rev) and cutting depth (mm) at three settings on the basis of Taguchi's L9 orthogonal series.The grey relational approach was being used to establish a multiobjective relationship between both the parameters of machining and the characteristics of results. To find the optimum values of parameters in the milling operation, the response list and plots are used and found to be Vc2-f1-d3. To order to justify the optimum results, the confirmation tests are performed.The machining process parameters for milling were thus optimized in this research to achieve the combined goals such as low surface roughness and high material removal rate on Aluminum 6061 t6.It was concluded that depth of cut is the most influencing parameter followed by feed rate and cutting velocity.

scholarly journals Experimental Study on The Effect of Cross Feed of Surface Grinding on the Vibration and the Surface Roughness of Hardened Tool Steel OCR12VM

2020 ◽  
Vol 11 (3) ◽  
pp. 313-322
Author(s):  
Chairul Anam ◽  
◽  
Khairul Muzaka ◽  
Dian Ridlo Pamuji
Keyword(s):  
Surface Roughness ◽  
Tool Steel ◽  
Dimensional Accuracy ◽  
Surface Grinding ◽  
Machining Process ◽  
Depth Of Cut ◽  
Grinding Process ◽  
Hardened Tool Steel ◽  
Stone Type ◽  
Grinding Stone

The grinding process is a machining process to obtain qualified surface roughness levels and high dimensional accuracy. There are two types of processes in the grinding process, namely the roughening and finishing processes. The vibration effect of the roughing process can damage and shorten the life of the tool/machine, while in the finishing process, the effect of vibration will reduce the dimensional accuracy, shape, and surface smoothness of the workpiece. This study aims to determine the effect of crossfeed on the amplitude of vibration and surface roughness of the workpiece on the surface grinding process. The materials used are hardened tool steel OCR12VM with a variety of grinding stone types A46QV and A80LV made of aluminum oxide. The Variables of process parameters are crossfeed (mm / step) and depth of cut (mm). The measurement of vibrations uses an accelerometer, which is processed by the math CAD program in the form of amplitude and frequency. For surface roughness measurements, it is used the MT-301 surface test with 5 sample points and a sample length of 0.8 mm. The results show that the greater the cross-feed value, the bigger the amplitude of the vibration level and the surface roughness of the workpiece. The magnitude of the amplitude of the vibration on the acceleration that occurs in the grinding stone type A46QV starts from 6,7369 -18.7525 g.rms, while the grinding stone type A80LV starts from 5.0904 g.rms to 18.2821 g.rms. The surface roughness achieved in both grit 46 and grit 80 is from N3 to N5.

scholarly journals Optimization of process parameters on commercial mild steel using taguchi technique

2017 ◽  
Vol 7 (1.1) ◽  
pp. 138 ◽  
Author(s):  
V. Jaiganesh ◽  
B. Yokesh Kumar ◽  
P. Sevvel ◽  
A.J. Balaji
Keyword(s):  
Surface Roughness ◽  
Mild Steel ◽  
Metal Cutting ◽  
Metal Removal ◽  
Removal Rate ◽  
Chip Thickness ◽  
Critical Factor ◽  
Thickness Ratio ◽  
Depth Of Cut ◽  
Versus Input

In the present scenario of bulk manufacturing where Metal Removal Rate (MRR), Chip Thickness Ratio (CTR) and Surface Roughness (SR) is of significant importance in manufacturing the component using CNC (computer numerical controlled) machines. Nine experiments were conducted based on orthogonal array. General linear model has been generated for all the three output parameters such as (MRR, Chip Thickness Ratio surface roughness) versus input parameters (speed, time, depth of cut). The statistical method called the analysis of variance (ANOVA) is applied to find the critical factor. The Main effects of S/N ratio values are found and plotted in the form of graph. The optimized value is found for speed, time, and depth of cut by using “MINITAB” software. By using this optimized value the efficient metal cutting can be done in commercial mild steel.

Machinability Investigation of Reaction-Bonded Silicon Carbide by Single-Point Diamond Turning

2008 ◽  
Vol 389-390 ◽  
pp. 151-156 ◽  
Author(s):  
Zhi Yu Zhang ◽  
Ji Wang Yan ◽  
Tsunemoto Kuriyagawa
Keyword(s):  
Surface Roughness ◽  
Silicon Carbide ◽  
Large Scale ◽  
High Efficiency ◽  
Low Cost ◽  
Single Point ◽  
Diamond Turning ◽  
Machining Process ◽  
Depth Of Cut ◽  
Material Microstructure

Reaction-bonded silicon carbide (RB-SiC) is a recently developed ceramic material with many merits such as low manufacturing temperature, dense structure, high purity and low cost. In the present paper, the precision machinability of RB-SiC was studied by microindentation and single-point diamond turning (SPDT) tests. The influence of depth of cut and tool feed rate on surface roughness and cutting force was investigated. Results showed that there was no clear ductile-brittle transition in machining behavior. The material removal mechanism involves falling of the SiC grains and intergranular microfractures of the bonding silicon, which prevents from large-scale cleavage fractures. The minimum surface roughness depends on the initial material microstructure in terms of sizes of the SiC grains and micro pores. This work preliminarily indicates that SPDT can be used as a high-efficiency machining process for RB-SiC.

scholarly journals Optimization of Machining Parameters of Aluminum Alloy BS-1474 2014 A using Response Surface Methodology

2020 ◽  
Author(s):  
waqas javaid ◽  
Tauqeer Iqbal ◽  
Ammar ul Hassan
Keyword(s):  
Surface Roughness ◽  
Response Surface Methodology ◽  
Aluminum Alloy ◽  
Response Surface ◽  
Removal Rate ◽  
Machining Process ◽  
Interface Temperature ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Turning Process

Abstract High surface quality, optimum Material Removal Rate (MRR) and Tool-Chip Interface temperature (T c ) have significant importance in machining process. Similarly, dimensional accuracy in machining process also relies heavily on machining parameters. In machining operations, there are a number of parameters which have direct or indirect effect on the Surface Roughness (Ra) and MRR of the product. The surface roughness and MRR in turning process are affected by spindle speed (SS), feed rate (FR) and depth of cut (DOC). The optimization of turning parameters will be very helpful in improving quality of manufacturing and machining cost. In order to have an improved product, extensive research has been carried out to optimize machining process. The current research is focused at Response Surface Methodology (RSM) of turning process of Aluminum alloy (BS-1474 2014 A) by using variable sets of machining parameters i.e., SS, FR and DOC with carbide tipped tool. Multiple experiments were performed on CNC Lathe machine by using different combinations of process parameters. Response surface methodology was applied to reach theoretical values of the responses parameters (i.e, Ra, MRR, T c ) and an agreement was observed between actual machining results and methodology values. Design Expert-7 was used as a statistical tool to come to a conclusion on whether achieved results are optimum for turning process or otherwise. For a close correlation, comparison between hypothetical and investigational data is also the part of this research. Significant agreement between theoretically optimized machining parameters and experimental data has been observed.

scholarly journals Optimization Of Machining Process Parameters In Turning And Drilling By using Design Of Experiments With Aluminum 6061-O Alloy And Austenitic Stainless Steel

2019 ◽  
Vol 8 (11) ◽  
pp. 625-633
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Design Of Experiments ◽  
Process Parameters ◽  
Removal Rate ◽  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Drilling Operation ◽  
Input Parameters

Optimization is required everywhere particularly in the industrial sector. As a part of that machining emphasized in this paper to optimize the parameters involved in the turning and drilling operation on CNC machines using the Aluminum and Stainless steel alloys. The task is initiated with design of experiments and hence the cost of operation is also reduced. During the experimental process the input parameters involved for turning were considered as cutting speed, feed and depth of cut. And for the drilling operation the input process parameters considered were speed of drill, feed. The output parameters emphasized were surface roughness and dimensional accuracy. By the investigation using the experiments, it in turn leads to an optimized environment for the operation that was carried out. Taguchi technique is a widely used and efficient technique for correlating the process parameters for an efficient and effective operation. Then the process L9 and L16 orthogonal arrays were chosen and signal to noise ratios were computed. At the end the input parameters speed, feed, depth of cut, depth of drill and outcome parameters surface roughness, material removal rate and time of operation were optimized.

scholarly journals Optimization of Turning Parameter of Composite Materials Using Response Surface Method in Minitab

2021 ◽  
Author(s):  
S. S Kulkarni ◽  
Sarika Sharma
Keyword(s):  
Surface Roughness ◽  
Composite Material ◽  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Research Work ◽  
Machining Process ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Rsm Optimization

This paper represents the optimization method utilized in machining process for figuring out the most advantageous manner design. Typically, the technique layout parameters in machining procedures are noticeably few turning parameters inclusive of reducing velocity, feed and depth. The optimization of speed, feed depth of cut is very tough because of several other elements associated with processing situations and form complexities like surface Roughness, material removal rate (MRR) that are based Parameters. On this task a new fabric glass fibre composite is introduced through which could lessen costing of manufacturing and time and additionally it will boom the technique of productiveness. Composite substances have strength, stiffness, light weight, which gives the large scope to engineering and technology. The proposed research work targets to analyze turning parameters of composite material. The machining parameters are very important in manufacturing industries. The present research work is optimized surface roughness of composite material specifically in turning procedure with the aid of changing parameter including intensity of reduce, slicing velocity and feed price and additionally expect the mechanical houses of composite material. The RSM optimization is important because it evaluates the effects of multiple factors and their interactions on one or more responsive variables. It is observed that the material removal rate increases and surface roughness decreases as per the increase of Spindle speed and feed rate.

scholarly journals EFFECT OF MACHINING PARAMETERS ON SURFACE ROUGHNESS, POWER CONSUMPTION, AND MATERIAL REMOVAL RATE OF ALUMINIUM 6065-SI-MWCNT METAL MATRIX COMPOSITE IN TURNING OPERATIONS

2021 ◽  
Vol 22 (2) ◽  
pp. 283-293
Author(s):  
Savina Jaddinagadhe Puttaswamy ◽  
Raghavendra Bommanahalli Venkatagiriyappa
Keyword(s):  
Surface Roughness ◽  
Metal Removal ◽  
Removal Rate ◽  
Cutting Speed ◽  
Stir Casting ◽  
Influential Factor ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Lathe Machine ◽  
Tungsten Carbide Tool

Nanocomposites were prepared with Al-6065-Si and multi walled carbon nanotubes of 1 wt.% as reinforcement through the stir-casting method. Fabricated nanocomposites were machined on a lathe machine using a tungsten carbide tool. The study investigated the multi-objective optimization of the turning operation. Cutting velocity, feed, and depth of cut were considered for providing minimum Surface Roughness of the workpiece. Also, the power consumed by the lathe machine with maximum metal removal rate was examined by surface response methodology. The design of experiments was developed based on rotational central composite design. Analysis of variance was executed to investigate the adequacy and the suitable fit of the developed mathematical models. Multiple regression models were used to represent the relationship between the input and the desired output variables. The analysis indicates that the feed is the most influential factor that effects the surface roughness of the workpiece. Cutting speed and the depth of cut are two other important factors that proportionally influence the power consumed by the lathe tool as compared to the feed rate. ABSTRAK: Komposit nano disediakan bersama Al-6065-Si dan karbon nanotiub berbilang dinding sebanyak 1 wt.% sebagai bahan penguat melalui kaedah kacauan-tuangan. Komposit nano yang terhasil melalui mesin pelarik ini menggunakan alat tungsten karbida. Kajian ini merupakan pengoptimuman pelbagai objektif operasi pusingan. Kelajuan potongan, suapan dan kedalaman potongan diambil kira sebagai pemberian minimum pada kekasaran permukaan bahan kerja. Tenaga yang digunakan bagi mesin pelarik dengan kadar maksimum penyingkiran logam diteliti melalui kaedah tindak balas permukaan. Rekaan eksperimen yang dibangunkan ini adalah berdasarkan rekaan komposit pusingan tengah. Analisis varian telah dijalankan bagi mengkaji kecukupan dan penyesuaian lengkap bagi model matematik yang dibangunkan. Model regresi berganda digunakan bagi menunjukkan hubungan antara input dan pembolehubah output yang dikehendaki. Analisis menunjukkan pemberian suapan merupakan faktor mempengaruhi keberkesanan kekasaran permukaan bahan kerja. Kelajuan pemotongan dan kedalaman potongan adalah dua faktor penting lain yang mempengaruhi kadar langsung ke atas tenaga yang digunakan oleh mesin pelarik dibandingkan kadar pemberian suapan.

Sign in / Sign up

Export Citation Format

Share Document