scholarly journals Study and Analysis of ENCON Opportunities in Automatic Tube Filling Machine

2019 ◽  
pp. 612-618
Author(s):  
Sushrut Madhav Patankar ◽  
Clifford Edward
Keyword(s):  
Mechanical Energy ◽  
Operating Cost ◽  
Simple Modification ◽  
Folding Mechanism ◽  
Aluminum Tubes ◽  
Tube Filling

In this paperentitled, “Study and analysis of ENCON opportunities in Automatic Tube Filling Machine,” In this machine the plastic tubes gets sealed and aluminum tubes gets folded at open end. Wehave plannedto study and design mechanical cam based folding operation which will reduce the operating cost of the machine. We are going to study the folding operation in traditional Automatic tube filling machine. The traditional Automatic tube filling machine has pneumatically operated folding mechanism due to which operating cost of the machine increases. Using mechanical energy and cam principle we can operate the tube folding mechanism[4]. Simple modification in design will operates the tube folding mechanism without changing the main motor consumption.

Reduction of structural vibrations with the piezoelectric stacks ring

2020 ◽  
Vol 64 (1-4) ◽  
pp. 729-736
Author(s):  
Jincheng He ◽  
Xing Tan ◽  
Wang Tao ◽  
Xinhai Wu ◽  
Huan He ◽  
...  
Keyword(s):  
Vibration Control ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Structural Vibrations ◽  
Rotor Systems ◽  
Fea Model ◽  
Piezoelectric Stacks ◽  
Shunt Damping ◽  
Reduction Effect ◽  
Euler Bernoulli Beam

It is known that piezoelectric material shunted with external circuits can convert mechanical energy to electrical energy, which is so called piezoelectric shunt damping technology. In this paper, a piezoelectric stacks ring (PSR) is designed for vibration control of beams and rotor systems. A relative simple electromechanical model of an Euler Bernoulli beam supported by two piezoelectric stacks shunted with resonant RL circuits is established. The equation of motion of such simplified system has been derived using Hamilton’s principle. A more realistic FEA model is developed. The numerical analysis is carried out using COMSOL® and the simulation results show a significant reduction of vibration amplitude at the specific natural frequencies. Using finite element method, the influence of circuit parameters on lateral vibration control is discussed. A preliminary experiment of a prototype PSR verifies the PSR’s vibration reduction effect.

RANCANG BANGUN MESIN PEMOTONG RUMPUT TENAGA SURYA UNTUK NAVIGASI

2015 ◽  
Vol 1 (1) ◽  
pp. 5-16
Author(s):  
John Ohoiwutun
Keyword(s):  
High Speed ◽  
Solar Power ◽  
Human Life ◽  
Operating Cost ◽  
Fuel Oil ◽  
Kinematics And Dynamics ◽  
Control Input ◽  
High Speed Cutting ◽  
Lawn Mower ◽  
Coal Fuel

Utilization of conventional energy sources such as coal, fuel oil, natural gas and others on the one hand has a low operating cost, but on the other side of the barriers is the greater source of diminishing returns and, more importantly, the emergence of environmental pollution problems dangerous to human life. This study aims to formulate the kinematics and dynamics to determine the movement of Solar Power Mower. In this study, using solar power as an energy source to charge the battery which then runs the robot. Design and research was conducted in the Department of Mechanical Workshop Faculty of Engineering, University of Hasanuddin of Gowa. Control system used is a manual system using radio wave transmitter and receiver which in turn drive the robot in the direction intended. Experimental results showed that treatment with three variations of the speed of 6.63 m / s, 8.84 m / s and 15.89 m / sec then obtained the best results occur in grass cutting 15.89 sec and high-speed cutting grass 5 cm. Formulation of kinematics and dynamics for lawn mowers, there are 2 control input variables, x and y ̇ ̇ 3 to control the output variables x, y and θ so that there is one variable redudant. Keywords: mobile robots, lawn mower, solar power

Simple Modification Measurement of Photodegradability of Polymers by using Photo-induced Chemiluminescence Technique

2013 ◽  
Vol 10 (2) ◽  
pp. 51
Author(s):  
Siti Farhana Zakaria ◽  
Keith R Millington
Keyword(s):  
Free Radicals ◽  
Organic Materials ◽  
Oxidative Degradation ◽  
Working Life ◽  
Bimolecular Reaction ◽  
Synthetic Polymers ◽  
Accelerated Weathering ◽  
Simple Modification ◽  
Uv Absorbers ◽  
Irradiation Period

Polymers and organic materials that are exposed to sunlight undergo photooxidation, which leads to deterioration of their physical properties. To allow adequate performance under outdoor conditions, synthetic polymers require additives such as antioxidants and UV absorbers. A major problem with optimising polymer formulations to maximise their working life span is that accelerated weathering tests are empirical. The conditions differ significantly from real weathering situations, and samples require lengthy irradiation period. Degradation may not be apparent in the early stages of exposure, although this is when products such as hydroperoxides are formed which later cause acceleration of oxidation. A simple way of quantifying the number of free radicals presents in organic materials following exposure to light or heat is by measuring chemiluminescence (CL) emission. Most polymers emit CL when they undergo oxidative degradation, and it originates from the bimolecular reaction of macroperoxy radicals which creates an excited carbonyl.

Pembuatan Pilot Project Pengolahan Air Limbah Industri Rambut Palsu dengan Sistem Lumpur Aktif

2016 ◽  
Vol 8 (15) ◽  
pp. 37-47
Author(s):  
Sri Moertinah ◽  
Misbachul Moenir
Keyword(s):  
Activated Sludge ◽  
Biological Treatment ◽  
Operating Cost ◽  
Pilot Project ◽  
Labor Costs ◽  
Industrial Waste Water ◽  
Microbial Adaptation ◽  
Central Java ◽  
Electricity Costs

This study aims to create a pilot project for wastewater treatment wig industry with biological activated sludge technology to applied in the industry. Design criteria for the pilot project are the influent COD ≤ 900 mg/l, MLSS = 3,000 mg/l, 30-hours residence time. DO ≥ 2 mg/l and flow 10 m3/day. Implementation of a pilot project initiated by seeding aerobic microbes and microbial adaptation to proceed with wastewater to be treated. The trial results showed that the pilot project % COD reduction ranged from 73.2% - 91% and the result is not much different from the results of laboratory-scale research about 89.7% and the quality  of the effluent is already fullfill the standard of industrial waste water wig required by the Central Java Provincial Regulation No. 5 of 2012. The calculation of operating cost of activated sludge biological treatment which includes labor costs, electricity costs, equipment maintenance costs, expenses and other nutrients obtained the price of  Rp. 2972/m3 or Rp. 742.99/wig.ABSTRAKPenelitian ini bertujuan untuk membuat pilot project pengolahan air limbah industri rambut palsu dengan sistem lumpur aktif yang diterapkan di industri. Kriteria desain pilot project tersebut adalah COD influen ≤ 900 mg/l, MLSS = 3.000 mg/l, waktu tinggal 30 jam DO≥2 mg/l  dan debit air limbah 10 m3/hari. Pelaksanaan pilot project dimulai dengan seeding mikroba aerob dan dilanjutkan dengan adaptasi mikroba dengan air limbah yang akan diolah. Hasil uji coba pilot project menunjukkan bahwa % penurunan COD berkisar antara 73,2% - 91% dan hasil ini tidak berbeda jauh dengan hasil penelitian skala laboratorium sekitar 89,7% dan kualitas air limbah hasil pengolahan sudah memenuhi baku mutu air limbah industri rambut palsu yang dipersyaratkan oleh Peraturan Daerah Provinsi Jawa Tengah No 5 tahun 2012. Dari hasil perhitungan biaya operasional pengolahan biologis lumpur aktif yang meliputi biaya tenaga kerja, biaya listrik, biaya perawatan peralatan, biaya nutrien dan lainnya diperoleh harga sebesar Rp. 2972/m3  atau Rp. 742,99/wig.   Kata kunci : air limbah industri rambut palsu, pilot project, sistem lumpur aktif

CLINICAL AND NEUROLOGICAL FEATURES OF TRAUMATIC BRAIN DISEASE DURING THE STAGES OF REHABILITATION

2020 ◽  
Vol 3 (1) ◽  
pp. 51-53
Author(s):  
Rano Azizova ◽  
◽  
Umida Shamsiyeva ◽  
Mirzohid Turabbayev ◽  
Begzod Jorayev ◽  
...  
Keyword(s):  
Mechanical Energy ◽  
Pathological Process ◽  
Brain Disease ◽  
Clinical Forms ◽  
Neurological Features ◽  
Mechanisms Of Development ◽  
The Brain

Traumatic brain disease (TBHD) is a pathological process triggered by the damaging effect of mechanical energy on the brain and is characterized — with a variety of clinical forms — by the unity of etiology, pathogenetic and sanogenetic mechanisms of development and outcomes.

Sign in / Sign up

Export Citation Format

Share Document