scholarly journals Harmonic Analyzer Using ATMEGA 328P

2019 ◽  
pp. 694-698
Author(s):  
Christie Anil Joseph ◽  
Sumant Sarmokadam ◽  
Dr. Usha Surendra
Keyword(s):  
Power Systems ◽  
Power Supply ◽  
Remote Monitoring ◽  
Low Cost ◽  
Data Logging ◽  
Technical Improvement ◽  
Harmonic Analyzer ◽  
Commercial Applications ◽  
The Cost ◽  
And Control

The technical improvement in Power electronics and Control system industries has made the linear consumer loads to dominate by sensitive and sophisticated non-linear consumer loads. These have a major impact on the power systems, causing increase in harmonics distortion. This paper proposes a hardware design to develop a Harmonic Analyzer along with Arduino ATMEGA 328P, that can be able to analyze up to 15th harmonic of an alternating current power supply. The Harmonic analyzer has been developed considering the cost, accomplished with respect to accuracy, easy modifications through coding, remote monitoring and data logging. The developed low cost handheld product may be used for industrial as well as commercial applications.

scholarly journals Design and Research on Power Systems and Algorithms for Controlling Electric Underground Mining Machines Powered by Batteries

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4060
Author(s):  
Artur Kozłowski ◽  
Łukasz Bołoz
Keyword(s):  
Power Systems ◽  
Power Supply ◽  
Internal Combustion Engines ◽  
Underground Mining ◽  
Test Stand ◽  
Research Network ◽  
Control Algorithms ◽  
Systems And Control ◽  
And Control ◽  
Supply Systems

This article discusses the work that resulted in the development of two battery-powered self-propelled electric mining machines intended for operation in the conditions of a Polish copper ore mine. Currently, the global mining industry is seeing a growing interest in battery-powered electric machines, which are replacing solutions powered by internal combustion engines. The cooperation of Mine Master, Łukasiewicz Research Network—Institute of Innovative Technologies EMAG and AGH University of Science and Technology allowed carrying out a number of works that resulted in the production of two completely new machines. In order to develop the requirements and assumptions for the designed battery-powered propulsion systems, underground tests of the existing combustion machines were carried out. Based on the results of these tests, power supply systems and control algorithms were developed and verified in a virtual environment. Next, a laboratory test stand for validating power supply systems and control algorithms was developed and constructed. The tests were aimed at checking all possible situations in which the battery gets discharged as a result of the machine’s ride or operation and when it is charged from the mine’s mains or with energy recovered during braking. Simulations of undesirable situations, such as fluctuations in the supply voltage or charging power limitation, were also carried out at the test stand. Positive test results were obtained. Finally, the power supply systems along with control algorithms were implemented and tested in the produced battery-powered machines during operational trials. The power systems and control algorithms are universal enough to be implemented in two different types of machines. Both machines were specially designed to substitute diesel machines in the conditions of a Polish ore mine. They are the lowest underground battery-powered drilling and bolting rigs with onboard chargers. The machines can also be charged by external fast battery chargers.

scholarly journals Multi-Blockchain-Based IoT Data Processing Techniques to Ensure the Integrity of IoT Data in AIoT Edge Computing Environments

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3515
Author(s):  
Sung-Ho Sim ◽  
Yoon-Su Jeong
Keyword(s):  
Low Cost ◽  
Third Party ◽  
Monitoring And Control ◽  
Constant Size ◽  
Computing Environments ◽  
Iot Devices ◽  
Cloud Servers ◽  
The Cost ◽  
Processing Techniques ◽  
And Control

As the development of IoT technologies has progressed rapidly recently, most IoT data are focused on monitoring and control to process IoT data, but the cost of collecting and linking various IoT data increases, requiring the ability to proactively integrate and analyze collected IoT data so that cloud servers (data centers) can process smartly. In this paper, we propose a blockchain-based IoT big data integrity verification technique to ensure the safety of the Third Party Auditor (TPA), which has a role in auditing the integrity of AIoT data. The proposed technique aims to minimize IoT information loss by multiple blockchain groupings of information and signature keys from IoT devices. The proposed technique allows IoT information to be effectively guaranteed the integrity of AIoT data by linking hash values designated as arbitrary, constant-size blocks with previous blocks in hierarchical chains. The proposed technique performs synchronization using location information between the central server and IoT devices to manage the cost of the integrity of IoT information at low cost. In order to easily control a large number of locations of IoT devices, we perform cross-distributed and blockchain linkage processing under constant rules to improve the load and throughput generated by IoT devices.

scholarly journals Longevity of Raw and Lyophilized Crude Urease Extracts

2021 ◽  
Vol 2 (2) ◽  
pp. 325-334
Author(s):  
Neda Javadi ◽  
Hamed Khodadadi Tirkolaei ◽  
Nasser Hamdan ◽  
Edward Kavazanjian
Keyword(s):  
Crude Extract ◽  
Room Temperature ◽  
Low Cost ◽  
Extraction Process ◽  
Crude Extracts ◽  
Simple Extraction ◽  
Commercial Applications ◽  
Stable Source ◽  
The Stability ◽  
The Cost

The stability (longevity of activity) of three crude urease extracts was evaluated in a laboratory study as part of an effort to reduce the cost of urease for applications that do not require high purity enzyme. A low-cost, stable source of urease will greatly facilitate engineering applications of urease such as biocementation of soil. Inexpensive crude extracts of urease have been shown to be effective at hydrolyzing urea for carbonate precipitation. However, some studies have suggested that the activity of a crude extract may decrease with time, limiting the potential for its mass production for commercial applications. The stability of crude urease extracts shown to be effective for biocementation was studied. The crude extracts were obtained from jack beans via a simple extraction process, stored at room temperature and at 4 ℃, and periodically tested to evaluate their stability. To facilitate storage and transportation of the extracted enzyme, the longevity of the enzyme following freeze drying (lyophilization) to reduce the crude extract to a powder and subsequent re-hydration into an aqueous solution was evaluated. In an attempt to improve the shelf life of the lyophilized extract, dextran and sucrose were added during lyophilization. The stability of purified commercial urease following rehydration was also investigated. Results of the laboratory tests showed that the lyophilized crude extract maintained its activity during storage more effectively than either the crude extract solution or the rehydrated commercial urease. While incorporating 2% dextran (w/v) prior to lyophilization of the crude extract increased the overall enzymatic activity, it did not enhance the stability of the urease during storage.

Система дистанційного моніторингу та керування кліматичними параметрами приміщень в процесі промислового виробництва

2020 ◽  
pp. 19-23
Author(s):  
Ігор Бережний ◽  
◽  
Адріан Наконечний ◽  
Keyword(s):  
Energy Efficiency ◽  
Comparative Analysis ◽  
Technological Process ◽  
Remote Monitoring ◽  
High Speed ◽  
Monitoring And Control ◽  
Remote Monitoring And Control ◽  
The Cost ◽  
And Control ◽  
Communication Lines

Based on the research and comparative analysis of existing systems, an algorithm for remote monitoring and control of the technological process using IoT technologies is proposed and developed. We consider a system with flexible algorithms, which combines different data protocols using Wi-Fi technology, which allows you to use this type of system in any industry safely with high speed, energy efficiency and without the cost of communication lines.

scholarly journals A Cost-Effective Embedded Platform for Greenhouse Environment Control and Remote Monitoring

Agronomy ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 936 ◽  
Author(s):  
Radu L. Sumalan ◽  
Nicoleta Stroia ◽  
Daniel Moga ◽  
Vlad Muresan ◽  
Alexandru Lodin ◽  
...  
Keyword(s):  
Remote Monitoring ◽  
Low Cost ◽  
Cost Effective ◽  
Agricultural System ◽  
Control Network ◽  
Monitoring And Control ◽  
Embedded Platform ◽  
Environment Control ◽  
Functional Features ◽  
And Control

This paper presents the development of a cost-effective automatic system for greenhouse environment control. The architectural and functional features were analyzed in the context of the realization of a controlled-environment agricultural system through all its stages: installation, deployment of the software, integration, maintenance, crop control strategy setup and daily operation of the grower. The proposed embedded platform provides remote monitoring and control of the greenhouse environment and is implemented as a distributed sensing and control network integrating wired and wireless nodes. All nodes were built with low-cost, low-power microcontrollers. The key issues that were addressed include the energy-efficient control, the robustness of the distributed control network to faults and a low-cost hardware implementation. The translation of the supervisory growth-planning information to the operational (control network) level is achieved through a specific architecture residing on a crop planning module (CPM) and an interfacing block (IB). A suite of software applications with flows and interfaces developed from a grower-centric perspective was designed and implemented on a multi-tier architecture. The operation of the platform was validated through implementation of sensing and control nodes, application of software for configuration and visualization, and deployment in typical greenhouses.

Remote Monitoring for Solar Photovoltaic Systems in Rural Application Using GSM Network

2015 ◽  
Vol 16 (5) ◽  
pp. 413-419 ◽  
Author(s):  
Tanveer Ahmad ◽  
Qadeer Ul Hasan ◽  
A. Malik ◽  
N. S. Awan
Keyword(s):  
Solar System ◽  
Power Supply ◽  
Remote Monitoring ◽  
Solar Power ◽  
Mobile Station ◽  
Solar Photovoltaic ◽  
Monitoring And Control ◽  
Power Monitoring ◽  
Gsm Network ◽  
And Control

Abstract This paper presents design and development of solar power monitoring and control through GSM network in rural application. This system includes a GSM mobile and GSM hardware installed at solar system with 12VDC power for solar power monitoring along with temperatures (ambient and battery). This system is designed to conceptualizing how much solar power transferred to batteries and temperature conditions for that instant of time. Hardware is developed for the continuous update to the targeted station using GSM. The developed hardware gets the signal from the installed location calculate the real time power and temperature parameters. This information transferred to targeted mobile station through GSM interface using texting service (SMS). At the receiving end, power monitoring system is used to maintain the power to batteries profile locally. An easy, cost proficient and consistent working model of whole system has been developed which may be incorporated for data acquisition. Also the same system can use for uninterrupted power supply (UPS) systems.

scholarly journals Solar Rankine Engines: Examples and Projected Costs

1979 ◽  
Author(s):  
R. E. Barber
Keyword(s):  
Power Systems ◽  
Solar Power ◽  
Low Cost ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Solar Heat ◽  
Shaft Power ◽  
Cost Competitiveness ◽  
The Cost ◽  
Made In

Solar heat can be converted into shaft power by use of the Organic Rankine Cycle Engine (ORCE). The efficiency of the ORCE to convert the solar heat to shaft power varies from 7 or 8 percent for an ORCE heated by low temperature flat plate collectors at 200 F, to near 15 percent when heated by intermediate temperature collectors (300 F), and up to 25 percent with high temperature concentrating collectors (600 F). Barber-Nichols designed, built, and tested its first solar heated ORCE in 1973, which produced three tons of air conditioning. Since that time, the three-ton unit has reached its fourth iteration on the development path to production; a 77-ton water chiller was installed at LASL; two ORCE drives for 100-ton water chillers were delivered to Honeywell; seven 25-ton water Chillers were delivered to DOE demonstration sites; and a 25-hp ORCE for irrigation pumping was installed in Willard, N.M. Photographs, design details, and the measured performance of these units are presented herein as examples. The cost of solar power systems using an ORCE is also presented which shows that for the current $150 to $200/m2 cost of cencentrating collectors, the system cost would be in excess of $2500/kw peak. The ORCE is approximately 25 percent of this cost or $600/kw. Consequently, while reductions in the cost and improvements in the performance of the ORCE can and should be made in the development process, the cost competitiveness of a solar power system is largely dependent on developing low cost concentrating collectors which can be sold for 1/2 to 1/3 of today’s price.

Evaluating the Possibility to Implement Autonomous Power Supply from a Hydrogenerator as Applied to Dispatching Systems for Housing and Utility Services

Vestnik MEI ◽  
2020 ◽  
Vol 6 (6) ◽  
pp. 67-75
Author(s):  
Georgiy G. Ilyin ◽  
Keyword(s):  
Control System ◽  
Water Supply ◽  
Power Supply ◽  
Large Diameter ◽  
Supply Networks ◽  
Periodic Maintenance ◽  
Utility Services ◽  
Storage Batteries ◽  
The Cost ◽  
And Control

Currently, we are witnessing active development of urban building construction, which dictates new requirements for the infrastructure of water supply and sanitation. These requirements are aimed at improving the reliability and compliance with stringent environmental standards. Dispatch supervision and control of water supply networks are among the key tasks that have to be solved under such conditions. The problem of implementing such systems lies in difficulty of setting up power supply to the equipment used in these systems. The power supply of such systems is as a rule provided by using storage batteries, which entails the need for periodic maintenance of these systems and thereby increases the cost of their operation. The problem can be solved by using an autonomous source of electricity. The energy of the water flow in the pipeline is proposed to be used as such source. The possibility of setting up an autonomous dispatch control system for housing and utility services based on a hydrogenerator is estimated. The study is carried out by analyzing the hydraulic parameters of a bypass pipeline installed on a large-diameter pipeline. To determine the flow velocity and pressure in the bypass pipeline, the fluid flow is modeled in it. The modeling results and their subsequent analysis made it possible to calculate the range of power produced by the hydrogenerator and estimate the possibility of setting up an autonomous dispatch control system.

Sign in / Sign up

Export Citation Format

Share Document