scholarly journals ХОЛОДОПРОДУКТИВНІСТЬ СИСТЕМИ КОНДИЦІЮВАННЯ ЗОВНІШНЬОГО ПОВІТРЯ ЗА ПОТОЧНИМ ТЕПЛОВИМ НАВАНТАЖЕННЯМ

2019 ◽  
pp. 51-55
Author(s):  
Євген Іванович Трушляков ◽  
Андрій Миколайович Радченко ◽  
Микола Іванович Радченко ◽  
Ян Зонмін ◽  
Анатолій Анатолійович Зубарєв ◽  
...  
Keyword(s):  
Heat Load ◽  
Air Conditioning ◽  
Maximum Rate ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Outdoor Air ◽  
Air Conditioning System ◽  
Maximum Value ◽  
Current Consumption ◽  
Air Conditioning Systems

The efficiency of the outdoor air conditioning systems application depends on how full the installed cooling capacity is applied, that is, with a more complete load and for as long as the possible yearly duration in actual climatic conditions. The production of cold is taken as a criteria of a quantitative evaluation of the efficiency of applying the cooling capacity of air conditioning systems – the amount of cold produced in accordance with its current demand for air conditioning, which in turn depends on the current consumption of cooling capacity and its duration and equals to their multiplication. It is obvious that the maximum value of the current amount of cold produced/consumed indicates an effective application of the installed cooling capacity. However, since the current demands of cooling capacity and their duration, that is, the amount of cold produced/consumed, depending on the changing current climatic conditions, they are characterized by significant fluctuations, which makes it difficult to choose the installed cooling capacity of the air conditioning system. Obviously, if we determine the amount of cold produced/consumed by its current values and summarized during the year, it is possible to significantly simplify the choice of the installed cooling capacity. At the same time, the current amount of cold produced/consumed causes a change in the rate of increment of the annual cold production with a change in the installed cooling capacity, and the maximum rate corresponds to the installed cooling capacity, which provides its efficient use. Proceeding from a different rate of increment of annual cold production with an increase in the installed cooling capacity of the air conditioning system due to a change in heat load in accordance with current climatic conditions during the year, the value of design heat load on the air conditioning system (installed cooling capacity) that provides maximum or close to it the rate of increment of the annual production of cold, and hence the maximum efficient use of installed cooling capacity is chosen

scholarly journals ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ КОНДИЦІЮВАННЯ ЗОВНІШНЬОГО ПОВІТРЯ СИСТЕМИ КОМБІНОВАНОГО ТИПУ

2019 ◽  
pp. 9-14
Author(s):  
Євген Іванович Трушляков ◽  
Андрій Миколайович Радченко ◽  
Микола Іванович Радченко ◽  
Сергій Анатолійович Кантор ◽  
Веніамін Сергійович Ткаченко
Keyword(s):  
Heat Load ◽  
Air Conditioning ◽  
Rational Design ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Energetic Efficiency ◽  
Cooling Load ◽  
Air Conditioner ◽  
Outdoor Air ◽  
Air Conditioning System

One of the most attractive reserves of enhancing the energetic efficiency of air conditioning systems is to provide the operation of refrigeration compressors in nominal or close to nominal modes by choosing rational design cooling loads (cooling capacities) and their distribution according to a cooling load behaviour within the overall design (installed) cooling load band to match current changeable climatic conditions and provide close to maximum annual cooling capacity generation according to cooling duties. The direction of increasing the efficiency of outdoor air conditioning in combined central-local type systems by rationally distributing the heat load - cooling capacity of the central air conditioner into zones of variable heat load in accordance with current climatic conditions and its relatively stable value, i.e. cooling capacity required for further air cooling at the entrance to the indoor recirculation air conditioning system is justified. By comparing the values of the excessive production of cold and its deficit within every 3 days for a rational design heat load of the air conditioning system (cooling capacity of the installed refrigeration machine), which provides close to maximum annual production of cold, and the corresponding values of the excess and deficit of cooling capacity in accordance with current climatic conditions during July substantiated the feasibility of accumulating the excess of cooling capacity of a central air conditioner at low current loads and its use for covering cooling deficit at elevated heat loads through pre-cooling the outdoor air. It is developed a scheme of a combined central-local air conditioning system, which includes the subsystems for the outdoor air conditioning in a central air conditioner and the local indoor recirculated air conditioning.

scholarly journals ВИЗНАЧЕННЯ ПРОЕКТНОЇ ХОЛОДОПРОДУКТИВНОСТІ СИСТЕМИ КОНДИЦІЮВАННЯ ПОВІТРЯ В КОНКРЕТНИХ КЛІМАТИЧНИХ УМОВАХ І РІЗНИМИ МЕТОДАМИ

2019 ◽  
pp. 15-19
Author(s):  
Євген Іванович Трушляков ◽  
Андрій Миколайович Радченко ◽  
Сергій Анатолійович Кантор ◽  
Веніамін Сергійович Ткаченко ◽  
Сергій Георгійович Фордуй ◽  
...  
Keyword(s):  
Power Plant ◽  
Fuel Consumption ◽  
Air Conditioning ◽  
Maximum Rate ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Temperate Climate ◽  
Air Cooling ◽  
Air Conditioning System ◽  
Air Conditioning Systems

The cold output for the heat-moisture treatment of ambient air in air conditioning systems depends on its parameters (temperature and relative humidity), which vary significantly during operation. To determine the installed (design) cooling capacity of air conditioning system chillers, it is proposed to use a reduction in fuel consumption of a power plant or cooling capacity generation following its current conditioning spending over a certain period, since both of these indicators characterize the efficiency of using the installed cooling capacities of the air conditioning system. To extend the results of the investigation to a wide range of air conditioning units, two methods were used to determine the design cooling capacity (refrigerating capacity): by the maximum annual value and by the maximum growth rate of the efficiency indicator. The first method allows choosing the design cooling capacity, which provides a maximum annual reduction in the specific fuel consumption due to air cooling or maximum cooling capacity generation, which is necessary for air cooling following current climatic conditions. The second method allows determining the minimum design (installed) cooling capacity of chillers, which provides the maximum rate of reduction in fuel consumption by the power plant and the increment in the annual cooling capacity generation following the installed cooling capacity of chillers. The efficiency of air conditioning systems was analyzed for different climatic conditions: a temperate climate using the example of Voznesensk city (Ukraine) and the subtropical climate of Nanjing city (China). It is shown that the design cooling capacity values calculated by both indicators of its use efficiency are the same for the same climatic conditions. Wherein, if to determine the design cooling capacity by both methods - by the maximum annual value and the maximum rate of growth of the indicator, its values turned out to be quite close for tropical climatic conditions and somewhat different for a temperate climate.

scholarly journals МЕТОДОЛОГІЧНІ ПІДХОДИ ДО ВИЗНАЧЕННЯ ХОЛОДОПРОДУКТИВНОСТІ СИСТЕМ КОНДИЦІЮВАННЯ ПОВІТРЯ ЗА ЗМІННИХ КЛІМАТИЧНИХ УМОВ

2019 ◽  
pp. 71-75
Author(s):  
Євген Іванович Трушляков ◽  
Андрій Миколайович Радченко ◽  
Микола Іванович Радченко ◽  
Сергій Георгійович Фордуй ◽  
Сергій Анатолійович Кантор ◽  
...  
Keyword(s):  
Heat Load ◽  
Air Conditioning ◽  
Rational Design ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Stable Range ◽  
Air Conditioning System ◽  
Air Conditioning Systems ◽  
Current Heat

One of the most attractive reserves for improving the energy efficiency of air conditioning systems is to ensure the operation of refrigeration compressors in nominal or close to nominal modes by selecting a rational design heat load and distributing it within its design value according to the behavior of the current heat load under variable current climatic conditions to provide the maximum or close to maximum annual cooling capacity generation according to cooling duties of air conditioning. In the general case, the overall range of current thermal loads of any air conditioning system includes a range of unstable loads associated with the precooling of ambient air with significant fluctuations in cooling capacity according with current climatic conditions, and a relatively stable range of cooling capacity consumed to further reduce air temperature from a certain threshold temperature to the final outlet temperature. It is quite obvious that a stable range of heat load can be ensured within operating a conventional compressor in a mode close to the nominal mode while precooling the ambient air with significant fluctuations in heat load requires regulation of the cooling capacity through the use of a variable speed compressor. Thus, in response of the behavior of the change in current heat loads, any air conditioning system, whether the central air-conditioning system with its heat procession in a central air conditioner, or a combination thereof with a local recirculation system of indoor air, essentially consists of two subsystems: pre-cooling the ambient air and then cooling it to the set point temperature. The proposed method of distribution of design heat load depending on the behavior of the current heat load is useful for the rational design of central air conditioning systems and their combined versions with the local air conditioning system.

scholarly journals ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ СИСТЕМ КОНДИЦІЮВАННЯ ПОВІТРЯ ШЛЯХОМ РОЗПОДІЛУ ТЕПЛОВОГО НАВАНТАЖЕННЯ ЗА СТУПЕНЕВИМ ПРИНЦИПОМ

2019 ◽  
pp. 49-53
Author(s):  
Євген Іванович Трушляков ◽  
Микола Іванович Радченко ◽  
Андрій Миколайович Радченко ◽  
Сергій Георгійович Фордуй ◽  
Сергій Анатолійович Кантор ◽  
...  
Keyword(s):  
Thermal Load ◽  
Air Conditioning ◽  
Rational Design ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Outlet Temperature ◽  
Thermal Loads ◽  
Air Conditioning System ◽  
Air Conditioning Systems

Maintaining the operation of refrigeration compressors in nominal or close modes by selecting a rational design thermal load and distributing it in response to the behavior of the current thermal load according to the current climatic conditions is one of the promising reserves for improving the energy efficiency of air conditioning systems, which implementation ensures maximum or close to it in the annual cooling production according to air conditioning duties. In general case, the total range of current thermal loads of any air-conditioning system includes a range of unstable loads caused by precooling of ambient air with significant fluctuations in the cooling capacity according to current climatic conditions, and a range of relatively stable cooling capacity expended for further lowering the air temperature from a certain threshold temperature to the final outlet temperature. If a range of stable thermal load can be provided within operating a conventional compressor in a mode close to nominal, then precooling the ambient air with significant fluctuations in thermal load requires adjusting the cooling capacity by using a variable speed compressor or using the excess of heat accumulated at reduced load. Such a stage principle of cooling ensures the operation of refrigerating machines matching the behavior of current thermal loads of any air-conditioning system, whether the central air conditioning system with ambient air procession in the central air conditioner or its combination with the local indoors recirculation air conditioning systems in the air-conditioning system. in essence, as combinations of subsystems – precooling of ambient air with the regulation of cooling capacity and subsequent cooling air to the mouth of the set point temperature under relatively stable thermal load.

Analysis of the Behavior of an Air Conditioning System Based on the Solar Energy Natural Regulation in Amazonian Climatic Conditions

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Elson C. Santos ◽  
Emanuel N. Macêdo ◽  
Marcos A. B. Galhardo ◽  
Thiago Oliveira Costa ◽  
André Felipe P. Costa ◽  
...  
Keyword(s):  
Direct Current ◽  
Air Conditioning ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Power Modeling ◽  
Frequency Converters ◽  
Industrial Buildings ◽  
Air Conditioning Systems ◽  
Solar Resource ◽  
Installed Capacity

Abstract Air conditioning systems (ACSs) represent one of the main demands for electricity in residential, commercial, and industrial buildings. The use of a photovoltaic air conditioning unit (PVACU) represents an attractive application to this demand for reasons such as environmental concerns and the match between diurnal cooling load and solar resource. A PVACU consists of a photovoltaic generator (PVG) that supply an ACS through direct current to direct current and frequency converters, without energy storage. This system considers the natural adjustment of the ACS cooling capacity according to the PVG power. Modeling the ACS, the PVG, and the thermal load (TL) makes possible to evaluate PVACU performance. For this, a small library’s TL and an ACS supplied by a PVG were used as case study. The PVG installed capacity assumes values of 700, 1000, and 1400 Wp. The simulation results show that the PVACU with a 1400 Wp PVG would be sufficient to regulate internal temperature within international comfort standards in the range of 20 °C to 24 °C. According to the data obtained in the simulations, it was possible to conclude that the PVACU has a large potential to be used in air conditioning of other environments in regions with Amazonian climatic conditions.

scholarly journals Design and Analysis of a Thermoelectric Air-conditioning System

2020 ◽  
pp. 1-11
Author(s):  
A. Anthony Adeyanju ◽  
K. Manohar
Keyword(s):  
Air Conditioning ◽  
Thermoelectric Module ◽  
Cooling Capacity ◽  
Peltier Effect ◽  
Refrigeration Cycle ◽  
Air Conditioner ◽  
Air Conditioning System ◽  
Thermoelectric Air Conditioner ◽  
Air Conditioning Systems ◽  
Dc Current

Thermoelectric devices use the Peltier effect which creates a heat flux between the junctions of two different types of materials. The thermoelectric module also referred to as a heat pump transfers heat from one side to the other when a DC current is applied. This study carried out the theoretical and experimental analysis of a thermoelectric air conditioning system. A prototype thermoelectric air conditioner of 286 W cooling capacity was built and a testing enclosure made from plywood and Styrofoam was also constructed in order to validate the theoretical result with an experimentation. It was discovered that thermoelectric air conditioning took 4 minutes to reach its desired temperature of 22℃ whereas the standard air conditioning system (Refrigeration Cycle) took 20 minutes to cool to a room temperature. Economically it was also discovered that thermoelectric air conditioning system is 50% cheaper than the refrigeration cycle air conditioning systems. The thermoelectric air conditioner has cheaper maintenance and greater estimated life span of 7 years more than the refrigeration air conditioner. This is because the air conditioner that operates on the refrigeration cycle uses a rotating compressor while the thermoelectric air conditioner uses thermometric module.

scholarly journals The Experimental Assessment of R134a and Its Lower GWP Alternative R1234yf in an Automobile Air Conditioning System

2019 ◽  
Vol 25 (12) ◽  
pp. 1-14
Author(s):  
Rafah Hussain ◽  
Issam Mohammed Ali
Keyword(s):  
Ambient Temperature ◽  
Air Conditioning ◽  
Cooling Capacity ◽  
Air Conditioning System ◽  
Automotive Air Conditioning ◽  
Nominal Capacity ◽  
Automotive Air Conditioning System ◽  
And Performance ◽  
Air Conditioning Systems ◽  
Main Operating

Reducing global warming potential (GWP) of refrigerants is needed to the decrease of ozone-depleting of refrigeration systems leakages. Refrigerant R1234yf is now used to substitute R134a inside mobile air conditioning systems. Thermodynamic properties of R1234yf are similar to R134a. Also, it has a very low GWP of 4, compared to 1430 for R134a, making it a proper choice for future automobile refrigerants. The purpose of this research is to represent the main operating and performance differences between R1234yf and R134a. Experimental analysis was carried out on the automotive air conditioning system (AACS) with 3 kW nominal capacity, to test and compare the performance of R134a with R1234yf. Experiments were accomplished for both refrigerants in almost the same working conditions and procedure with a range of ambient temperature varied from 26oC to 50oC. Parameters studied were ambient temperature, type of refrigerant in the system at compressor speed 1450 rpm, and internal thermal loads of passenger room. The performance characteristics of the system, including COP and cooling capacity, were studied by changing different parameters. The results show that COP of R134a is higher than R1234yf by 12.6%, while the refrigeration effect of R134a is higher than R1234yf by 25%. This shows that R1234yf is a suitable and good candidate for drop-in replacement of R134a in AACS.

scholarly journals Energy Saving in Split Air Conditioner using Evaporative Cooling Pad at the ODU

2019 ◽  
Vol 9 (1) ◽  
pp. 1858-1862
Keyword(s):  
Power Consumption ◽  
Performance Improvement ◽  
Air Conditioning ◽  
Evaporative Cooling ◽  
Cooling Capacity ◽  
Air Conditioner ◽  
Optimum Thickness ◽  
Outdoor Air ◽  
Air Conditioning System ◽  
Overall Performance

The objective of the study is to investigate the performance improvement in a split air conditioning system using evaporative cooling pads at ODU (outdoor unit) and to determine optimum thickness and material of the cooling pad. For this purpose experiments were conducted on 0.8 TR capacity split air conditioner charged with refrigerant R-22. For comparison experiments were performed with and without evaporative cooling pad. The effect of the different cooling pad material and thickness on the overall performance of split air conditioner is experimentally found by measuring cooling capacity and the power consumption of the system including water circulation pump. From the experimental work it is found that the cellulose cooling pad gives the best results among the selected materials. Split air conditioner coupled with cellulose cooling pad of 100 mm thickness at ODU results in to 13.8% increase in overall COP, 9.5 % reduction in power consumption and 5.1 % increase in cooling capacity at 35°C DBT and 32% relative humidity outdoor air condition.

scholarly journals The effect of changing the evacuated tube tilt angle and the fluid of the solar collector on the performance of a hybrid solar air conditioning system

2015 ◽  
Vol 12 (2) ◽  
pp. 288-292
Author(s):  
Baghdad Science Journal
Keyword(s):  
Tilt Angle ◽  
Solar Collector ◽  
Air Conditioning ◽  
Air Conditioning System ◽  
Evacuated Tube Solar Collector ◽  
Current Consumption ◽  
Air Conditioning Systems ◽  
Evacuated Tube ◽  
Consumption Saving ◽  
A Current

In the hybrid coolingsolar systems , a solar collectoris used to convertsolar energy intoheat sourcein order to super heat therefrigerant leave thecompressor,andthisprocess helpsin the transformation ofrefrigerant state from gaseous statetothe liquid statein upper two-thirdsof thecondenserinstead of the lower two-thirdssuchas in thetraditional air-conditioning systems and this willreduce theenergyneeded torun the process ofcooling.In this research two hybrid air-conditioning system with an evacuated tube solar collector were used, therefrigerant was R22 and the capacity was 2 tons each.The tilt angle of the evacuated tube solar collector was changed and the solar collector fluid was replaced into oil instead of water.A comparison wasin the amount ofcurrentconsumptionof the two systems at the same operating conditions.The currentconsumptionof the hybrid coolingsystemwith the changed tilt angle and replaced fluid wasless thantheunchanged oneby(38% - 58%), meaning that there was a current consumption saving as a result of tubes tilt angle and solar collector fluid changing.

Energy Efficiency Analyses of Air-Conditioning Systems in Commercial Buildings in Egypt

2003 ◽  
Author(s):  
Ramiz Kameel ◽  
Essam E. Khalil
Keyword(s):  
Air Conditioning ◽  
Climatic Conditions ◽  
Operating Costs ◽  
Superior Performance ◽  
Energy Prices ◽  
Air Conditioning System ◽  
Maintenance Costs ◽  
Primary Water ◽  
Environmentally Sensitive ◽  
Air Conditioning Systems

Many buildings around the world utilize HVAC systems to provide the thermal comfort conditions for the occupants and users of these buildings as well as providing adequate conditions for special environmentally sensitive equipment. The appropriate air conditioning system design would necessarily provide the comfort and hygiene conditions with as low as possible initial capital and operating costs. The present study provides comprehensive analyses and comparisons between the water-cooled vs. air-cooled chillers with packaged water-cooled DX unit systems under the local Egyptian climatic conditions, primary water and energy prices and legistilations. The present study presents a comparison among the various systems according to the equipment and installation, operating, and maintenance costs. Based on the above analyses and the data collected with the prevailing prices, energy, water and maintenance costs at January 2003 in Egypt. It is apparent that water-cooled packaged units are of superior performance in terms of energy consumption and initial costs.

Sign in / Sign up

Export Citation Format

Share Document