scholarly journals Stress-Based Plaque Vulnerability Index and Assessment for Carotid Atherosclerotic Plaques Using Patient-Specific Vessel Material Properties

2018 ◽  
Vol 15 (4) ◽  
pp. 189-201 ◽  
Author(s):  
Qingyu Wang ◽  
Dalin Tang ◽  
Gador Canton ◽  
Zheyang Wu ◽  
Thomas S. Hatsukami ◽  
...  
Keyword(s):  
Material Properties ◽  
Vulnerability Index ◽  
Patient Specific ◽  
Atherosclerotic Plaques ◽  
Plaque Vulnerability ◽  
Vessel Material

Impact of Patient-Specific In Vivo Vessel Material Properties on Carotid Atherosclerotic Plaque Stress/Strain Calculations

2019 ◽  
Vol 16 (03) ◽  
pp. 1842002 ◽  
Author(s):  
Qingyu Wang ◽  
Dalin Tang ◽  
Gador Canton ◽  
Thomas S. Hatsukami ◽  
Kristen L. Billiar ◽  
...  
Keyword(s):  
Material Properties ◽  
Carotid Plaque ◽  
Computational Models ◽  
Patient Specific ◽  
Stress And Strain ◽  
Carotid Atherosclerotic Plaque ◽  
Plaque Vulnerability ◽  
Material Models ◽  
Vessel Material

Patient-specific vessel material properties are in general lacking in image-based computational models. Carotid plaque stress and strain conditions with in vivo material and old material models were investigated (8 patients, 16 plaques). Plaque models using patient-specific in vivo vessel material properties showed significant differences from models using old material properties from the literature on stress and strain calculations. These differences demonstrated that models using in vivo material properties could improve the accuracy of stress and strain calculations which could potentially lead to more accurate plaque vulnerability assessment.

Abstract 562: Human Carotid Atherosclerosis Plaque Progression and Vessel Material Stiffness at Follow Up Had Positive Correlation: An in vivo Vessel Stiffness MRI Follow Up Study

2017 ◽  
Vol 37 (suppl_1) ◽  
Author(s):  
Qingyu Wang ◽  
Dalin Tang ◽  
Gador Canton ◽  
Jian Guo ◽  
Xiaoya Guo ◽  
...  
Keyword(s):  
Negative Correlation ◽  
Material Properties ◽  
Stretch Ratio ◽  
Patient Specific ◽  
Plaque Progression ◽  
Material Stiffness ◽  
Variation Rate ◽  
Vessel Material

It is hypothesized that artery stiffness may be associated with plaque progression. However, in vivo vessel material stiffness follow-up data is lacking in the literature. In vivo 3D multi-contrast and Cine magnetic resonance imaging (MRI) carotid plaque data were acquired from 8 patients with follow-up (18 months) with written informed consent obtained. Cine MRI and 3D thin-layer models were used to determine parameter values of the Mooney-Rivlin models for the 81slices from 16 plaques (2 scans/patient) using our established iterative procedures. Effective Young’s Modulus (YM) values for stretch ratio [1.0,1.3] were calculated for each slice for analysis. Stress-stretch ratio curves from Mooney-Rivlin models for the 16 plaques and 81 slices are given in Fig. 1. Average YM value of the 81 slices was 411kPa. Slice YM values varied from 70 kPa (softest) to 1284 kPa (stiffest), a 1734% difference. Average slice YM values by vessel varied from 109 kPa (softest) to 922 kPa (stiffest), a 746% difference. Location-wise, the maximum slice YM variation rate within a vessel was 306% (139 kPa vs. 564 kPa). Average slice YM variation rate within a vessel for the 16 vessels was 134%. Average variation of YM values from baseline (T1) to follow up (T2) for all patients was 61.0%. The range of the variation of YM values was [-28.4%, 215%]. For progression study, YM increase (YMI=YM T2 -TM T1 ) showed negative correlation with plaque progression measured by wall thickness increase (WTI), (r= -0.6802, p=0.0634). YM T2 showed strong negative correlation with WTI (r= -0.7764, p=0.0235). Correlation between YM T1 and WTI was not significant (r= -0.4353, p= 0.2811). Conclusion In vivo carotid vessel material properties have large variations from patient to patient, along the vessel segment within a patient, and from baseline to follow up. Use of patient-specific, location specific and time-specific material properties could potentially improve the accuracy of model stress/strain calculations.

scholarly journals Quantifying Effects of Plaque Structure and Material Properties on Stress Distributions in Human Atherosclerotic Plaques Using 3D FSI Models

2005 ◽  
Vol 127 (7) ◽  
pp. 1185-1194 ◽  
Author(s):  
Dalin Tang ◽  
Chun Yang ◽  
Jie Zheng ◽  
Pamela K. Woodard ◽  
Jeffrey E. Saffitz ◽  
...  
Keyword(s):  
Material Properties ◽  
Plaque Rupture ◽  
Three Dimensional ◽  
Mechanical Analysis ◽  
Atherosclerotic Plaques ◽  
Plaque Vulnerability ◽  
Stress Strain ◽  
Maximal Stress ◽  
Good Potential ◽  
Stress Variations

Background: Atherosclerotic plaques may rupture without warning and cause acute cardiovascular syndromes such as heart attack and stroke. Methods to assess plaque vulnerability noninvasively and predict possible plaque rupture are urgently needed. Method: MRI-based three-dimensional unsteady models for human atherosclerotic plaques with multi-component plaque structure and fluid-structure interactions are introduced to perform mechanical analysis for human atherosclerotic plaques. Results: Stress variations on critical sites such as a thin cap in the plaque can be 300% higher than that at other normal sites. Large calcification block considerably changes stress/strain distributions. Stiffness variations of plaque components (50% reduction or 100% increase) may affect maximal stress values by 20–50 %. Plaque cap erosion causes almost no change on maximal stress level at the cap, but leads to 50% increase in maximal strain value. Conclusions: Effects caused by atherosclerotic plaque structure, cap thickness and erosion, material properties, and pulsating pressure conditions on stress/strain distributions in the plaque are quantified by extensive computational case studies and parameter evaluations. Computational mechanical analysis has good potential to improve accuracy of plaque vulnerability assessment.

scholarly journals 3D Plotting of Silica/Collagen Xerogel Granules in an Alginate Matrix for Tissue-Engineered Bone Implants

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 830
Author(s):  
Sina Rößler ◽  
Andreas Brückner ◽  
Iris Kruppke ◽  
Hans-Peter Wiesmann ◽  
Thomas Hanke ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Bone Regeneration ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Viscoelastic Behavior ◽  
Matrix Phase ◽  
Patient Specific ◽  
Active Player ◽  
Alginate Concentration ◽  
Alginate Matrix

Today, materials designed for bone regeneration are requested to be degradable and resorbable, bioactive, porous, and osteoconductive, as well as to be an active player in the bone-remodeling process. Multiphasic silica/collagen Xerogels were shown, earlier, to meet these requirements. The aim of the present study was to use these excellent material properties of silica/collagen Xerogels and to process them by additive manufacturing, in this case 3D plotting, to generate implants matching patient specific shapes of fractures or lesions. The concept is to have Xerogel granules as active major components embedded, to a large proportion, in a matrix that binds the granules in the scaffold. By using viscoelastic alginate as matrix, pastes of Xerogel granules were processed via 3D plotting. Moreover, alginate concentration was shown to be the key to a high content of irregularly shaped Xerogel granules embedded in a minimum of matrix phase. Both the alginate matrix and Xerogel granules were also shown to influence viscoelastic behavior of the paste, as well as the dimensionally stability of the scaffolds. In conclusion, 3D plotting of Xerogel granules was successfully established by using viscoelastic properties of alginate as matrix phase.

Numerical Simulation of Blood Flow in Patient-Specific Stenotic Carotid Bifurcation Geometries

2009 ◽  
Author(s):  
Megan Cummins ◽  
Jenn S. Rossmann
Keyword(s):  
Vortex Shedding ◽  
Carotid Bifurcation ◽  
Secondary Flows ◽  
Patient Specific ◽  
Mechanical Forces ◽  
Plaque Vulnerability ◽  
Governing Equations ◽  
Unstable Plaque ◽  
Recirculation Zones ◽  
Insight Into

The hemodynamics and fluid mechanical forces in blood vessels have long been implicated in the deposition and growth of atherosclerotic plaque. Detailed information about the hemodynamics in vessels affected by significant plaque deposits can provide insight into the mechanisms and likelihood of plaque weakening and rupture. In the current study, the governing equations are solved in their finite volume formulation in several patient-specific geometries. Recirculation zones, vortex shedding, and secondary flows are captured. The forces on vessel walls are shown to correlate with unstable plaque deposits. The results of these simulations suggest morphological features that may usefully supplement percent stenosis as a predictor of plaque vulnerability.

Multi-level patient-specific modelling of the proximal femur. A promising tool to quantify the effect of osteoporosis treatment

2009 ◽  
Vol 367 (1895) ◽  
pp. 2079-2093 ◽  
Author(s):  
Leen Lenaerts ◽  
G. Harry van Lenthe
Keyword(s):  
Bone Strength ◽  
Material Properties ◽  
Bone Structure ◽  
Structural Information ◽  
Response To Treatment ◽  
Patient Specific ◽  
Loading Conditions ◽  
Femoral Bone ◽  
Fe Modelling ◽  
Specific Loading

Preventing femoral fractures is an important goal in osteoporosis research. In order to evaluate a person's fracture risk and to quantify response to treatment, bone competence is best assessed by bone strength. Finite-element (FE) modelling based on medical imaging is considered a very promising technique for the assessment of in vivo femoral bone strength. Over the past decades, a number of different FE models have been presented focusing on the effect of several methodological aspects, such as mesh type, material properties and loading conditions, on the precision and accuracy of these models. In this paper, a review of this work is presented. We conclude that moderate to good predictions can be made, especially when the models are tuned to specific loading scenarios. However, there is room for improvement when multiple loading conditions need to be evaluated. We hypothesize that including anisotropic material properties is the first target. As a proof of the concept, we demonstrate that the main orientation of the femoral bone structure can be calculated from clinical computed tomography scans. We hypothesize that this structural information can be used to estimate the anisotropic bone material properties, and that in the future this could potentially lead to a greater predictive value of FE models for femoral bone strength.

3.1 STRAIN DISCONTINUITIES IN CAROTID ATHEROSCLEROTIC PLAQUES – A NOVEL MARKER FOR PLAQUE VULNERABILITY?

2018 ◽  
Vol 24 (C) ◽  
pp. 71
Author(s):  
Tim Vonk ◽  
Evelien Hermeling ◽  
Floris Schreuder ◽  
Werner Mess ◽  
Eline Kooi
Keyword(s):  
Atherosclerotic Plaques ◽  
Plaque Vulnerability
Sign in / Sign up

Export Citation Format

Share Document