scholarly journals Influence of Ground Stress on Coal Seam Gas Pressure and Gas Content

2019 ◽  
Vol 15 (1) ◽  
pp. 53-61
Author(s):  
Xuebo Zhang ◽  
Zhiwei Jia
Keyword(s):  
Coal Seam ◽  
Gas Pressure ◽  
Gas Content ◽  
Coal Seam Gas ◽  
Ground Stress

scholarly journals Research and Optimization of Gas Extraction by Crossing-Seam Boreholes from Floor Roadway

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Gang Li ◽  
Jiafei Teng
Keyword(s):  
Coal Seam ◽  
Gas Permeability ◽  
Gas Pressure ◽  
Gas Content ◽  
Gas Extraction ◽  
Gas Migration ◽  
Governing Equations ◽  
Coal Seam Gas ◽  
Gas Seepage ◽  
Gas Disaster

Deep coal seams are characterized by large stress, high gas pressure, and low permeability. The gas disaster threatens the safe production of coal mine seriously. Gas extraction by crossing-seam boreholes from floor roadway (GECMBFR) can reduce the pressure and content of coal seam gas, which is the main measure to prevent gas disaster. Considering the Klinkenberg effect, governing equations of gas adsorption/desorption-diffusion, gas seepage, and stress fields within the coal seam are established to form the seepage-stress coupling model. The governing equations are embodied into a finite element driven software to numerically simulate gas migration and fluid-solid coupling law in coal seam. On this basis, the process of gas extraction under different borehole spacings and diameters is simulated. The effects of these two key parameters on coal seam gas pressure, gas content, and gas permeability were analyzed. The borehole spacing and diameter were determined to be 5 m and 0.09 m, respectively. Combined with the actual situation of a mine, the process of gas extraction from floor roadway with different cross-sectional schemes, ordinary drilling boreholes and punching combined drilling boreholes, is comparatively analyzed. The results show that the gas extraction effect by ordinary drilling boreholes is lower than that of the punching combined drilling boreholes, and the extraction is uneven and makes it difficult to meet the standard. Hydraulic punching was carried out, and coal was washed out of the borehole, which expanded the contact area between the borehole wall and coal seam. The coal seam around the punching borehole is unloaded, which improves coal permeability and accelerates gas migration towards the borehole, thus promoting the efficiency of gas extraction. It is more reasonable to use punching combined drilling borehole scheme when implementing the GECMBFR technology.

The Application of Crossing and Grid Drainage Boreholes in Floor Tunnel for Coal Roadway Safety Tunneling

2014 ◽  
Vol 962-965 ◽  
pp. 1169-1174
Author(s):  
Hong Qing Zhu ◽  
Bei Fang Gu ◽  
Min Bo Zhang ◽  
Chao Yu ◽  
Zhen Zhang
Keyword(s):  
Coal Seam ◽  
Gas Pressure ◽  
Gas Content ◽  
Dynamic Phenomenon ◽  
Coal Seams ◽  
Coal Seam Gas ◽  
Technical Parameters ◽  
Coal Roadway ◽  
Roadway Safety ◽  
The Relationship

In order to reduce the danger of single coal seams outburst during the tunneling in coal roadway and ensure the tunneling of coal seams, this text analyzed the mechanism of crossing drilling against outburst; studied the area measures of floor tunnel crossing and grid drainage boreholes in coal roadway, Designed and optimized the drilling technical parameters; Analyzed the relationship between the drainage concentration and scalar; Calculated the maximum overlying coal seam gas to spare scalar quantity is 224300 m3 ;Used a variety of indicators to investigate the effect of outburst prevention. It shows that Gas content and gas pressure have significant lower than drainage. After the drainage up to standard, all the sensitive indexes is not overrun, during the coal roadway tunneling, it does not appears dynamic phenomenon. Solve the problem of mining imbalances, guaranteed the safety driving of roadway.

scholarly journals Coal Seam Gas Extraction by Integrated Drillings and Punchings from the Floor Roadway considering Hydraulic-Mechanical Coupling Effect

Geofluids ◽  
2022 ◽  
Vol 2022 ◽  
pp. 1-10
Author(s):  
Chaojun Fan ◽  
Haiou Wen ◽  
Sheng Li ◽  
Gang Bai ◽  
Lijun Zhou
Keyword(s):  
Coal Seam ◽  
Coal Mines ◽  
Coupling Model ◽  
Gas Pressure ◽  
Gas Content ◽  
Engineering Practice ◽  
Gas Extraction ◽  
Coal Seam Gas ◽  
Mechanical Coupling ◽  
Gas Disasters

Owing to the exhaustion of shallow coal resources, deep mining has been occupied in coal mines. Deep buried coal seams are featured by the great ground stress, high gas pressure, and low permeability, which boost the risk of gas disasters and thus dramatically threaten the security about coal mines. Coal seam gas pressure and gas content can be decreased by gas extraction, which is the primary measure to prevent and control mine gas disasters. The coal mass is simplified into a continuous medium with dual structure of pores and fractures and single permeability. In consideration of the combined effects of gas slippage and two-phase flow, a hydraulic-mechanical coupling model for gas migration in coals is proposed. This model involves the equations of gas sorption and diffusion, gas and water seepage, coal deformation, and evolution of porosity and permeability. Based on these, the procedure of gas extraction through the floor roadway combined with hydraulic punching and ordinary drainage holes was simulated, and the gas extraction results were used to evaluate the outburst danger of roadway excavation and to verify the engineering practice. Results show that gas extraction can reduce coal seam gas pressure and slow down the rate of gas release, and the established hydraulic-mechanical coupling model can accurately reveal the law of gas extraction by drilling and punching boreholes. After adopting the gas extraction technology of drilling and hydraulic punching from the floor roadway, the remaining gas pressure and gas content are reduced to lower than 0.5 MPa and 5.68 m3/t, respectively. The achievements set a theoretical foundation to the application of drilling and punching integrated technology to enhance gas extraction.

Quantitative Evaluation of Coal Seam Gas Content Estimate Accuracy

1995 ◽  
Author(s):  
Matthew J. Mavor ◽  
Timothy J. Pratt ◽  
Charles R. Nelson
Keyword(s):  
Coal Seam ◽  
Quantitative Evaluation ◽  
Gas Content ◽  
Coal Seam Gas

scholarly journals Nitrogen Injection To Flush Coal Seam Gas Out Of Coal: An Experimental Study

2015 ◽  
Vol 60 (4) ◽  
pp. 1013-1028 ◽  
Author(s):  
Lei Zhang ◽  
Naj Aziz ◽  
Ting Ren ◽  
Jan Nemcik ◽  
Shihao Tu
Keyword(s):  
Coal Seam ◽  
Clean Energy ◽  
Gas Content ◽  
Coal Seams ◽  
Coal Seam Gas ◽  
Gas Recovery ◽  
Nitrogen Injection ◽  
Gas Desorption ◽  
Effective Role ◽  
Study Laboratory

Abstract Several mines operating in the Bulli seam of the Sydney Basin in NSW, Australia are experiencing difficulties in reducing gas content within the available drainage lead time in various sections of the coal deposit. Increased density of drainage boreholes has proven to be ineffective, particularly in sections of the coal seam rich in CO2. Plus with the increasing worldwide concern on green house gas reduction and clean energy utilisation, significant attention is paid to develop a more practical and economical method of enhancing the gas recovery from coal seams. A technology based on N2 injection was proposed to flush the Coal Seam Gas (CSG) out of coal and enhance the gas drainage process. In this study, laboratory tests on CO2 and CH4 gas recovery from coal by N2 injection are described and results show that N2 flushing has a significant impact on the CO2 and CH4 desorption and removal from coal. During the flushing stage, it was found that N2 flushing plays a more effective role in reducing adsorbed CH4 than CO2. Comparatively, during the desorption stage, the study shows gas desorption after N2 flushing plays a more effective role in reducing adsorbed CO2 than CH4.

scholarly journals The research of coal seam gas pressure and initial gas emission characteristics of borehole

2019 ◽  
Vol 7 (5) ◽  
pp. 1961-1969 ◽  
Author(s):  
Jianhua Zeng ◽  
Shixiang Tian ◽  
Guiyi Wu ◽  
Yunjun Zuo ◽  
Shiqing Xu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Gas Pressure ◽  
Emission Characteristics ◽  
Coal Seam Gas ◽  
Gas Emission

THE WALLOON COAL MEASURES—THE NEXT COAL SEAM GASTARGET?

2000 ◽  
Vol 40 (1) ◽  
pp. 86
Author(s):  
S.G. Scott ◽  
P. Crosdale
Keyword(s):  
Coal Seam ◽  
Vitrinite Reflectance ◽  
Petroleum Exploration ◽  
Gas Content ◽  
Coal Seam Gas ◽  
Gas Industry ◽  
Permian Coal ◽  
Petroleum Wells ◽  
The Individual ◽  
Coal Measures

The Queensland coal seam gas industry has grown over the last 12 years. During this time the vast majority of exploration wells have targeted the Late Permian coal measures in the Bowen and Galilee Basins. These formations have been the major target because they contain coals with a vitrinite reflectance ranging above 0.7%. This range has always been seen as the main period for methane generation.As well as containing vast quantities of Permian coal, Queensland also has vast quantities of Middle Jurassic coals within its Mesozoic Basins. These coals have received little-to-no exploration for their coal seam gas potential as they have always been interpreted as being immature for gas generation.Over 550 petroleum exploration wells drilled in the Mesozoic Surat Basin of eastern Queensland were reviewed to determine the coal volume of the intersected Walloon Coal Measures. A significant number have intersected large volumes of sub-bituminous to high volatile bituminous coals, in seams ranging up to 11.7 m in thickness. While the individual seams are not laterally persistent, the coal packages can be traced over hundreds of kilometres of the eastern Surat Basin.While only one well has tested the gas content, gas quality and saturation of the Walloon Coal Measures, numerous water bores have reported gas flows from the zone, and petroleum wells intersecting the formation have recorded high mud gas readings during drilling.The relatively shallow depth of the unit over much of the basin, the thickness of the coal packages, the proximity to major gas trunk pipelines and markets make the Walloon Coal Measures an ideal target for the next generation of coal seam gas explorers.

A Study on the Occurrence Law of Coal Seam Gas in Shanxi

2012 ◽  
Vol 594-597 ◽  
pp. 2244-2250 ◽  
Author(s):  
Guang Wu Xue ◽  
Hong Fu Liu ◽  
Jing Lin Guo
Keyword(s):  
Coal Seam ◽  
Mining Area ◽  
Magmatic Rock ◽  
Gas Content ◽  
Control Factor ◽  
Coal Seam Gas ◽  
Qinshui Basin ◽  
Mining Areas ◽  
Control Factors ◽  
Open Structures

The thickness of overlaying bedrock is the main control factor of preservation, in addition, magmatic activities, different structural types and hydrogeological conditions are also control factors. Regional magmatic thermometamorphism appeared as a kind of superimposed effect on the background of deep metamorphism. Two Eastwest （EW）metamorphic belts in Shanxi tallied with the distribution of magmatic rock masses, resulting in coal seam gas exploitation and utilization bases of Yangquan and Jincheng mining areas. From gas-accumulation structural setting, closed type structures make high gas content in coal reservoir such as Qinnan, Gujiao, Xingjiashe, Dongshe areas in the Qinshui Basin, Shilou, Daning-Jixian and Sanjiao-Liulin areas in the Hedong Basin, gas content is 10-15 m³/t or even higher. There are convenient channels for coal seam gas effusion in the open structures; with lower gas content, such as Lishi mining area in Hedong Basin, Huoxi structural area in Qinshui Basin, Hunyuan, and Wutai coal districts.

Experimental Study on Gas Pressure Effects on Gas Desorption Characteristic of Coal Seam

2013 ◽  
Vol 318 ◽  
pp. 367-370 ◽  
Author(s):  
Lin Chao Dai ◽  
Da Yong Lu ◽  
Zhen Liu
Keyword(s):  
Coal Seam ◽  
Gas Adsorption ◽  
Experimental System ◽  
Gas Pressure ◽  
Pressure Effects ◽  
Gas Content ◽  
Equilibrium Pressure ◽  
Gas Desorption ◽  
Exploitation And Utilization ◽  
The Impact

To further explore the impact of gas pressure on gas desorption and flowing law, the gas desorption experimental system designed autonomously is used to carry out studies on gas desorption experiment under different gas pressures. By data fitting, the relationship between gas desorption quantity and time is obtained and also established the model for gas desorption. The results show that: the gas desorption quantity curves is "The first half rises sharply, the latter half segment is gently rising and eventually becomes stabilized", and when the gas adsorption equilibrium pressure is the greater, the gas desorption amount is greater. And the formula can describe the gas desorption law well, the correlation coefficient R2 is above 0.97. The study provides an important theory reference to coal and gas outburst prediction, coal seam gas content prediction and its exploitation and utilization.

Sign in / Sign up

Export Citation Format

Share Document