Design and gas sorption study of c-alkylresorcin[n]arene-based cocrystals

2017 ◽  
Author(s):  
◽  
Shan Jiang
Keyword(s):  
Self Assembly ◽  
Guest Molecule ◽  
The Novel ◽  
Gas Sorption ◽  
X Ray Diffraction ◽  
University Of Missouri ◽  
X Ray ◽  
Solvent Systems ◽  
The University ◽  
Sorption Study

[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Supramolecular chemistry is the study of how to form complexes through molecular self-assembly and intermolecular bonding. Our research group has been doing a lot supramolecular research based on macrocycles such as calixarenes, pyrogallolarenes and resorcinarens. This research is interested in formation of novel C-alkyresorcin[n]arene( n=4,6) based cocrystals. The basic plan is to design and synthesize cocrystals, then analyze the crystal structure via single crystal X-ray diffraction technique, and determine if the novel cocrystal has the ability to absorb gases such as carbon dioxide and nitrogen. Chapter two is about the cocrystallization of six different C-alkylresorcin[4]arene according the chain length and guest molecule 1-(2-pyridylazo)-2-naphthol( PAN) in four solvent systems. Five successfully synthesized cocrystals' structure and synthesis are discussed. Chapter three talks how to use cocrystallization as a separation method to separate C-ethylresocin[6]arene from C-ethylresorcin[4]arene. Three noval C-ethylresorcin[6]arene based cocrystals from three different solvents are discussed. Chapter four investigates the cocrystallization between C-ethylresorcin[n]arene (n=4, 6) with 4, 4'-bipyridine. It discusses how solvent and component concentration affect such cocrystallization. Chapter five uses cocrystal formed from C-ethylresorcin[6]arene and 1,2-bis(4-pyridyl)ethane in acetone as the gas sorption candidate to test its ability to absorb gases after solvent removal. The conditions of removing solvents and gas sorption results are discussed.

Ten-Vertex Polyhedral Monocarbaborane Chemistry. The Novel High-Yield Formation of the Ten-Vertex closo Compound [6-(PMe2Ph)-closo-1-CB9H9] from the Thermolysis of [8,8-(PMe2Ph)2-nido-8,7-PtCB9H11]

1993 ◽  
Vol 58 (12) ◽  
pp. 2924-2935 ◽  
Author(s):  
Jane H. Jones ◽  
Bohumil Štíbr ◽  
John D. Kennedy ◽  
Mark Thornton-Pett
Keyword(s):  
Nmr Spectroscopy ◽  
Diffraction Analysis ◽  
High Yield ◽  
Monoclinic Space Group ◽  
The Novel ◽  
X Ray Diffraction ◽  
Metal Centre ◽  
X Ray ◽  
Yield Formation ◽  
Boiling Toluene

Thermolysis of [8,8-(PMe2Ph)2-nido-8,7-PtCB9H11] in boiling toluene solution results in an elimination of the platinum centre and cluster closure to give the ten-vertex closo species [6-(PMe2Ph)-closo-1-CB9H9] in 85% yield as a colourles air stable solid. The product is characterized by NMR spectroscopy and single-crystal X-ray diffraction analysis. Crystals (from hexane-dichloromethane) are monoclinic, space group P21/c, with a = 903.20(9), b = 1 481.86(11), c = 2 320.0(2) pm, β = 97.860(7)° and Z = 8, and the structure has been refined to R(Rw) = 0.045(0.051) for 3 281 observed reflections with Fo > 2.0σ(Fo). The clean high-yield elimination of a metal centre from a polyhedral metallaborane or metallaheteroborane species is very rare.

scholarly journals Some Novel Cobalt Diphenylphosphine Complexes: Synthesis, Characterization, and Behavior in the Polymerization of 1,3-Butadiene

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 4067
Author(s):  
Giovanni Ricci ◽  
Giuseppe Leone ◽  
Giorgia Zanchin ◽  
Benedetta Palucci ◽  
Alessandra Forni ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Single Crystals ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
And Behavior

Some novel cobalt diphenylphosphine complexes were synthesized by reacting cobalt(II) chloride with (2-methoxyethyl)diphenylphosphine, (2-methoxyphenyl)diphenylphosphine, and 2-(1,1-dimethylpropyl)-6-(diphenylphosphino)pyridine. Single crystals suitable for X-ray diffraction studies were obtained for the first two complexes, and their crystal structure was determined. The novel compounds were then used in association with methylaluminoxane (MAO) for the polymerization of 1,3-butadiene, and their behavior was compared with that exhibited in the polymerization of the same monomer by the systems CoCl2(PnPrPh2)2/MAO and CoCl2(PPh3)2/MAO. Some significant differences were observed depending on the MAO/Co ratio used, and a plausible interpretation for such a different behavior is proposed.

Dalnegroite, Tl5–xPb2x(As,Sb)2l–xS34, a new thallium sulphosalt from Lengenbach quarry, Binntal, Switzerland

2009 ◽  
Vol 73 (6) ◽  
pp. 1027-1032 ◽  
Author(s):  
F. Nestola ◽  
A. Guastoni ◽  
L. Bindi ◽  
L. Secco
Keyword(s):  
Polarized Light ◽  
New Mineral ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Concentrations ◽  
Reflected Light ◽  
Mohs Hardness ◽  
The Mean ◽  
The University ◽  
Probable Space

AbstractDalnegroite, ideally Tl4Pb2(As12Sb8)Σ20S34, is a new mineral from Lengenbach, Binntal, Switzerland. It occurs as anhedral to subhedral grains up to 200 μm across, closely associated with realgar, pyrite, Sb-rich seligmanite in a gangue of dolomite. Dalnegroite is opaque with a submetallic lustre and shows a brownish-red streak. It is brittle; the Vickers hardness (VHN25) is 87 kg mm-2(range: 69—101) (Mohs hardness ∼3—3½). In reflected light, dalnegroite is highly bireflectant and weakly pleochroic, from white to a slightly greenish-grey. In cross-polarized light, it is highly anisotropic with bluish to green rotation tints and red internal reflections.According to chemical and X-ray diffraction data, dalnegroite appears to be isotypic with chabournéite, Tl5-xPb2x(Sb,As)21-xS34. It is triclinic, probable space groupP1, witha= 16.217(7) Å,b= 42.544(9) Å,c= 8.557(4) Å, α = 95.72(4)°, β = 90.25(4)°, γ = 96.78(4)°,V= 5832(4) Å3,Z= 4.The nine strongest powder-diffraction lines [d(Å) (I/I0) (hkl)] are: 3.927 (100) (10 0); 3.775 (45) (22); 3.685 (45) (60); 3.620 (50) (440); 3.124 (50) (2); 2.929 (60) (42); 2.850 (70) (42); 2.579 (45) (02); 2.097 (60) (024). The mean of 11 electron microprobe analyses gave elemental concentrations as follows: Pb 10.09(1) wt.%, Tl 20.36(1), Sb 23.95(1), As 21.33(8), S 26.16(8), totalling 101.95 wt.%, corresponding to Tl4.15Pb2.03(As11.86Sb8.20)S34. The new mineral is named for Alberto Dal Negro, Professor in Mineralogy and Crystallography at the University of Padova since 1976.

Crystal structures of (S)- and (R,S)-2,2′-bipyridine-3,3′-dicarboxylic acid 1,1′-dioxides and of their barium salts: absolute configuration and molecular distortion enforced by supramolecular self-assembly

1997 ◽  
Vol 212 (3) ◽  
Author(s):  
P. Vojtíšek ◽  
I. Císařová ◽  
J. Podlaha ◽  
Z. Žák ◽  
S. Böhm ◽  
...  
Keyword(s):  
Single Crystal ◽  
Dicarboxylic Acid ◽  
Crystal Structures ◽  
Absolute Configuration ◽  
Self Assembly ◽  
Barium Salt ◽  
X Ray Diffraction ◽  
X Ray

AbstractCrystal structures of the title compounds were determined by single crystal X-ray diffraction. Absolute configuration of the barium salt of (+)-(

The Evaluation of TiTe2 as a Diffusion Barrier in the Formation of Low Thermal Conductivity Nanolaminates with Bi2Te3 and Sb2Te3

2010 ◽  
Vol 74 ◽  
pp. 38-47
Author(s):  
Clay Mortensen ◽  
Paul Zschack ◽  
David C. Johnson
Keyword(s):  
Thermal Conductivity ◽  
Diffusion Barrier ◽  
Self Assembly ◽  
Low Temperatures ◽  
Annealing Temperature ◽  
The Self ◽  
High Angle ◽  
X Ray Diffraction ◽  
Amorphous Precursor ◽  
X Ray

The evolution of designed [(Ti-Te)]x[(Sb-Te)]y, [(Bi-Te)]x[(Sb-Te)]y, [(Ti-Te)]w[(Bi-Te)]x[(Sb-Te)]y and [(Ti-Te)]w[(Bi-Te)]x[(Ti-Te)]y[(Sb-Te)]z precursors were followed as a function of annealing temperature and time using both low and high angle x-ray diffraction techniques to probe the self assembly into nanolaminate materials. The [(Bi-Te)]x[(Sb-Te)]y precursors were found to interdiffuse at low temperatures to form a (BixSb1-x)2Te3 alloy. The [(Ti-Te)]x[(Bi-Te)]y and [(Ti-Te)]x[(Sb-Te)]y precursors formed ordered nanolaminates [{(TiTe2)}1.35]x[Bi2Te3]y and [{(TiTe2)}1.35]x[Sb2Te3]y respectively. The [(Ti-Te)]w[(Bi-Te)]x[(Sb-Te)]x precursors formed [{(TiTe2)}1.35]w[(Bi0.5Sb0.5)2Te3]2x nanolaminates on annealing, as the bismuth and antimony layers interdiffused. Over the range of TiTe2 thicknesses used in [(Ti-Te)]w[(Bi-Te)]x[(Ti-Te)]y[(Sb-Te)]z precursors, Bi and Sb were found to interdiffuse through the 2-4 nm thick Ti-Te layers, resulting in the formation of (BixSb1-x)2Te3 alloy layers as part of the final nanolaminated products. When the Bi-Te and Sb-Te thicknesses were equal in the amorphous precursors, symmetric [{(TiTe2)}1.35]m[(Bi0.5Sb0.5)2Te3]n nanolamiantes were formed. When the thicknesses of Bi-Te and Sb-Te layers were not equal in the amorphous precursor, asymmetric [(TiTe2)1.35]m[(BixSb1-x)2Te3]n[(TiTe2)1.35]m[(BixSb1-x)2Te3]p nanolaminates were formed. These results imply that to form (A)w(B)x(C)y nanolaminates using designed layered precursors all three components must be immiscible. To form (A)x(B)y(A)x(C)z nanolaminates, the components must be immiscible or the precursor to the A component and the A component itself must be an effective interdiffusion barrier preventing B and C from mixing.

scholarly journals Insertion of Phosphenium Ions into a Bicyclo[1.1.0]Tetraphosphabutane Iron Complex

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3920
Author(s):  
Martin Weber ◽  
Gábor Balázs ◽  
Alexander V. Virovets ◽  
Eugenia Peresypkina ◽  
Manfred Scheer
Keyword(s):  
Diffraction Analysis ◽  
Room Temperature ◽  
31P Nmr ◽  
Spectroscopic Studies ◽  
Iron Complex ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Phosphenium Ions

By reacting [{Cp‴Fe(CO)2}2(µ,η1:1-P4)] (1) with in situ generated phosphenium ions [Ph2P][A] ([A]− = [OTf]− = [O3SCF3]−, [PF6]−), a mixture of two main products of the composition [{Cp‴Fe(CO)2}2(µ,η1:1-P5(C6H5)2)][PF6] (2a and 3a) could be identified by extensive 31P NMR spectroscopic studies at 193 K. Compound 3a was also characterized by X-ray diffraction analysis, showing the rarely observed bicyclo[2.1.0]pentaphosphapentane unit. At room temperature, the novel compound [{Cp‴Fe}(µ,η4:1-P5Ph2){Cp‴(CO)2Fe}][PF6] (4) is formed by decarbonylation. Reacting 1 with in situ generated diphenyl arsenium ions gives short-lived intermediates at 193 K which disproportionate at room temperature into tetraphenyldiarsine and [{Cp‴Fe(CO)2}4(µ4,η1:1:1:1-P8)][OTf]2 (5) containing a tetracyclo[3.3.0.02,7.03,6]octaphosphaoctane ligand.

Preparation and Characterization of Polyaniline Nanotubes Doped with Different Acid

2013 ◽  
Vol 401-403 ◽  
pp. 663-666
Author(s):  
Xue Lian Bai ◽  
Jian Ting Mei ◽  
Zhong Guo Mu ◽  
Yun Bai
Keyword(s):  
Acetic Acid ◽  
Self Assembly ◽  
Ammonium Persulfate ◽  
Tetraacetic Acid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Property ◽  
Assembly Method ◽  
Polyaniline Nanotubes

Polyaniline (PANI) nanotubes were synthesized separately using amino acetic acid (AA), ethylenediamine tetraacetic acid (EDTA), oxalic acid (OA) as dopant and ammonium persulfate (APS) as oxidant by a self-assembly method. SEM, TEM,FTIR and X-ray diffraction (XRD) and applying the 4 probes method characterized the morphology, structure and property of the product. It was found that nanotubes morphology were synthesized when the [Aci/[A ratio is 1:2.The room template conductivity of the products were studied.

scholarly journals Chirality, Gelation Ability and Crystal Structure: Together or Apart? Alkyl Phenyl Ethers of Glycerol as Simple LMWGs

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 732
Author(s):  
Alexander A. Bredikhin ◽  
Aidar T. Gubaidullin ◽  
Zemfira A. Bredikhina ◽  
Robert R. Fayzullin ◽  
Olga A. Lodochnikova
Keyword(s):  
Self Assembly ◽  
Chiral Recognition ◽  
Soft Materials ◽  
Gelling Agent ◽  
Low Molecular Weight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Types ◽  
Low Molecular Weight Gelators ◽  
Phenyl Ethers

Chiral recognition plays an important role in the self-assembly of soft materials, in particular supramolecular organogels formed by low molecular weight gelators (LMWGs). Out of 14 pairs of the studied racemic and enantiopure samples of alkyl-substituted phenyl ethers of glycerol, only eight enantiopure diols form the stable gels in nonane. The formation of gels from solutions was studied by polarimetry, and their degradation with the formation of xerogels was studied by the PXRD method. The revealed crystalline characteristics of all studied xerogels corresponded to those for crystalline samples of the parent gelators. In addition to those previously investigated, crystalline samples of enantiopure para-n-alkylphenyl glycerol ethers [alkyl = pentyl (5), hexyl (6), heptyl (7), octyl (8), nonyl (9)] and racemic 3-(3,5-dimethylphenoxy)propane-1,2-diol (rac-14) have been examined by single crystal X-ray diffraction analysis. Among 22 samples of compounds 1-14 studied by SC-XRD, seven different types of supramolecular motifs are identified, of which only two are realized in crystals of supramolecular gelators. An attempt was made to relate the ability to gel formation with the characteristics of the supramolecular motif of a potential gelling agent, and the frequency of formation of the motif, required for gelation, with the chiral characteristics of the sample.

scholarly journals Improving the reactivity of phenylacetylene macrocycles toward topochemical polymerization by side chains modification

2014 ◽  
Vol 10 ◽  
pp. 1613-1619 ◽  
Author(s):  
Simon Rondeau-Gagné ◽  
Jules Roméo Néabo ◽  
Maxime Daigle ◽  
Katy Cantin ◽  
Jean-François Morin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Self Assembly ◽  
Significant Enhancement ◽  
Side Chains ◽  
X Ray Diffraction ◽  
X Ray ◽  
Topochemical Polymerization ◽  
Scanning Electron

The synthesis and self-assembly of two new phenylacetylene macrocycle (PAM) organogelators were performed. Polar 2-hydroxyethoxy side chains were incorporated in the inner part of the macrocycles to modify the assembly mode in the gel state. With this modification, it was possible to increase the reactivity of the macrocycles in the xerogel state to form polydiacetylenes (PDAs), leading to a significant enhancement of the polymerization yields. The organogels and the PDAs were characterized using Raman spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM).

Sign in / Sign up

Export Citation Format

Share Document