scholarly journals MEMS energy harvesters with a wide bandwidth for low frequency vibrations

2015 ◽  
Author(s):  
◽  
Nuh Sadi Yuksek
Keyword(s):  
Resonance Frequency ◽  
High Frequency ◽  
Maximum Output Power ◽  
Low Frequency ◽  
Maximum Output ◽  
Wide Bandwidth ◽  
Electromagnetic Power ◽  
Wide Range ◽  
Macro Scale ◽  
Load Resistor

We have designed and built macro-scale wideband electrostatic and electromagnetic power harvesters for low frequency vibration. Initially, MEMS capacitive plates for power harvesting have been designed, modeled and fabricated, and characterized. It was designed with a 2 x 2 mm2 movable metallic plate with a thickness of 10 [mu]m suspended by four straight beams above a fixed electrode with a gap of 10 [mu]m to form a variable capacitor. The suspension beams are made with a width, thickness and total length of 20 [mu]m, 10 [mu]m and 1500 [mu]m, respectively. It was found that the single cavity device can harvest almost 180 nW peak power across a 100 k[omega] load resistor at 5g. The harvested power was dependent on excitation amplitude and supplied DC voltage. The MEMS capacitive energy harvester was integrated with two impact oscillators at 18 Hz and 25 Hz for transferring energy from low frequency structural vibration with varying mechanical spectra to high frequency vibration of a high resonance frequency cantilever at 605 Hz. The results demonstrate that the device was able to harvest power on a wide range from 14 to 39 Hz at 1g excitation. The harvested power was 96 nW on a 100 k[omega] load resistor. We also studied a macro-scale electromagnetic power harvester with multi-impact oscillations to achieve a broad bandwidth at low frequency vibrations. The device consists of three low frequency cantilever designed to resonate at 12 Hz, 19 Hz and 40 Hz, a high frequency cantilever with resonance frequency of 210 Hz and a pick-up coil fixed at the tip of the high frequency cantilever. This results in a wide bandwidth response from 11-62 Hz at 1 g. A maximum output power of 23.5 [mu]W can be harvested at 1 g acceleration on an optimum load resistor of 22 [omega].

scholarly journals Study of the Properties of a Hybrid Piezoelectric and Electromagnetic Energy Harvester for a Civil Engineering Low-Frequency Sloshing Environment

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 391
Author(s):  
Nan Wu ◽  
Yuncheng He ◽  
Jiyang Fu ◽  
Peng Liao
Keyword(s):  
Output Power ◽  
Energy Harvester ◽  
Civil Engineering ◽  
Maximum Output Power ◽  
Low Frequency ◽  
Electromagnetic Energy ◽  
Maximum Output ◽  
Piezoelectric Film ◽  
Hybrid Energy ◽  
Level Height

In this paper a novel hybrid piezoelectric and electromagnetic energy harvester for civil engineering low-frequency sloshing environment is reported. The architecture, fabrication and characterization of the harvester are discussed. The hybrid energy harvester is composed of a permanent magnet, copper coil, and PVDF(polyvinylidene difluoride) piezoelectric film, and the upper U-tube device containing a cylindrical fluid barrier is connected to the foundation support plate by a hinge and spring. The two primary means of energy collection were through the vortex street, which alternately impacted the PVDF piezoelectric film through fluid shedding, and the electromotive force (EMF) induced by changes in the magnetic field position in the conducting coil. Experimentally, the maximum output power of the piezoelectric transformer of the hybrid energy harvester was 2.47 μW (circuit load 270 kΩ; liquid level height 80 mm); and the maximum output power of the electromagnetic generator was 2.72 μW (circuit load 470 kΩ; liquid level height 60 mm). The low-frequency sloshing energy collected by this energy harvester can drive microsensors for civil engineering monitoring.

A Geometric Parametric Analysis of a Magnetorheological Engine Mount

2010 ◽  
Author(s):  
Walter Anderson ◽  
Constantine Ciocanel ◽  
Mohammad Elahinia
Keyword(s):  
High Frequency ◽  
New Technology ◽  
Low Frequency ◽  
Variable Stiffness ◽  
Small Displacement ◽  
Element Analysis ◽  
Mr Fluid ◽  
Wide Range ◽  
Engine Mount ◽  
Vehicle Technology

Engine vibration has caused a great deal of research for isolation to be performed. Traditionally, isolation was achieved through the use of pure elastomeric (rubber) mounts. However, with advances in vehicle technology, these types of mounts have become inadequate. The inadequacy stems from the vibration profile associated with the engine, i.e. high displacement at low frequency and small displacement at high frequency. Ideal isolation would be achieved through a stiff mount for low frequency and a soft mount for high frequency. This is contradictory to the performance of the elastomeric mounts. Hydraulic mounts were then developed to address this problem. A hydraulic mount has variable stiffness and damping due to the use of a decoupler and an inertia track. However, further advances in vehicle technology have rendered these mounts inadequate as well. Examples of these advances are hybridization (electric and hydraulic) and cylinder on demand (VCM, MDS & ACC). With these technologies, the vibration excitation has a significantly different profile, occurs over a wide range of frequencies, and calls for a new technology that can address this need. Magnetorheological (MR) fluid is a smart material that is able to change viscosity in the presence of a magnetic field. With the use of MR fluid, variable damping and stiffness can be achieved. An MR mount has been developed and tested. The performance of the mount depends on the geometry of the rubber part as well as the behavior of the MR fluid. The rubber top of the mount is the topic of this study due to its major impact on the isolation characteristics of the MR mount. To develop a design methodology to address the isolation needs of different hybrid vehicles, a geometric parametric finite element analysis has been completed and presented in this paper.

CLASSICAL-LIKE RESONANCE INDUCED BY NOISE IN A FITZHUGH–NAGUMO NEURON MODEL

1999 ◽  
Vol 09 (12) ◽  
pp. 2295-2303 ◽  
Author(s):  
S. RIPOLL MASSANÉS ◽  
C. J. PÉREZ VICENTE
Keyword(s):  
High Frequency ◽  
Interspike Interval ◽  
Low Frequency ◽  
Resonance Phenomenon ◽  
Characteristic Time Scale ◽  
Wide Range ◽  
External Stimuli ◽  
Interspike Interval Distribution ◽  
Stochastic Resonance Phenomenon ◽  
Interval Distribution

We have studied the stochastic behavior of Fitzhugh–Nagumo neuron-like model (FN) induced by subthreshold external stimuli. Our analysis based on three standard measures: the power spectrum, interspike interval distribution (ISI) and autocorrelation function shows that it is possible to define a characteristic time scale which can be identified in the response of the system for a wide range of frequencies. In contrast to previous studies we have focused our attention on high frequency signals which could be of interest for real systems such as nervous fibers in the auditory system. We report behaviors which resemble those of classical deterministic oscillators but never the stochastic resonance phenomenon typical of low frequency signals.

Effects of Response Range in Frequency Judgments of Common versus Uncommon Events

1996 ◽  
Vol 82 (3_suppl) ◽  
pp. 1371-1376 ◽  
Author(s):  
Kimihiko Yamagishi
Keyword(s):  
Cognitive Processes ◽  
High Frequency ◽  
Narrow Range ◽  
Frequency Estimation ◽  
Low Frequency ◽  
Social Facts ◽  
Frequency Judgments ◽  
Response Range ◽  
Wide Range ◽  
Wide Condition

Frequency estimation of social facts was compared between two methods of response elicitation. In the “narrow range” method, respondents answered questions like: “Out of 100 instances, how many instances belong to category X?”. In the “wide range” method, the same question was asked regarding “Out of 10,000.” A previous study in 1994 showed that judged frequencies were proportionally greater in the narrow condition than in the wide condition when subjects estimated the occurrence of low-frequency events. These results were interpreted to reflect cognitive processes of anchoring, wherein judged frequencies he close to small numbers within particular response ranges. The current work extends this argument to high-frequency events. In such cases, judgments about high-frequency events would be reached by similar cognitive processes operating toward the opposite direction. Hence, I predicted that judged frequencies for high-frequency events would be proportionally greater in the wide than in the narrow condition. Results were mostly consistent with these predictions. The relation to previous research is discussed.

Study of Cantilever Structures Based on Piezoelectric Materials for Energy Harvesting at Low Frequency of Vibration

2014 ◽  
Vol 976 ◽  
pp. 159-163 ◽  
Author(s):  
Roberto Ambrosio ◽  
Hector Gonzalez ◽  
Mario Moreno ◽  
Alfonso Torres ◽  
Rafael Martinez ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Lead Zirconate Titanate ◽  
Maximum Output Power ◽  
Low Frequency ◽  
Electrical Contacts ◽  
Piezoelectric Energy Harvesting ◽  
Maximum Output ◽  
Coupling Coefficients ◽  
Piezoelectric Energy

In this work is presented a study of a piezoelectric energy harvesting device used for low power consumption applications operating at relative low frequency. The structure consists of a cantilever beam made by Lead Zirconate Titanate (PZT) layer with two gold electrodes for electrical contacts. The piezoelectric material was selected taking into account its high coupling coefficients. Different structures were analyzed with variations in its dimensions and shape of the cantilever. The devices were designed to operate at the resonance frequency to get maximum electrical power output. The structures were simulated using finite element (FE) software. The analysis of the harvesting devices was performed in order to investigate the influence of the geometric parameters on the output power and the natural frequency. To validate the simulation results, an experiment with a PZT cantilever with brass substrate was carried out. The experimental data was found to be very close to simulation data. The results indicate that large structures, in the order of millimeters, are the ideal for piezoelectric energy harvesting devices providing a maximum output power in the range of mW

SiC BJT's for High Power Switching and RF Applications

2002 ◽  
Vol 742 ◽  
Author(s):  
Anant Agarwal ◽  
Sei-Hyung Ryu ◽  
Craig Capell ◽  
James Richmond ◽  
John W. Palmour ◽  
...  
Keyword(s):  
Single Cell ◽  
Temperature Coefficient ◽  
Supply Voltage ◽  
Maximum Output Power ◽  
Low Frequency ◽  
Current Gain ◽  
Maximum Output ◽  
Positive Temperature ◽  
Power Gain ◽  
Power Switching

ABSTRACTIn this paper, high performance, high voltage NPN bipolar junction transistors in 4H-SiC are presented for applications in low frequency (< 5 MHz) power conversion systems as well as in RF (425 MHz) power amplifiers. The power BJTs for low frequency switching applications were designed to block 1300 V and showed a specific on-resistance of 8.0 mohm-cm2, which outperforms all SiC power switching devices ever reported. Moreover, these transistors show a positive temperature coefficient in the on-resistance and a negative temperature coefficient in the current gain, which enable easy paralleling of the devices. In addition, RF BJTs were designed, fabricated and tested for operation at UHF frequencies. The common emitter breakdown voltage was in excess of 500 V consistent with the 5 micron collector thickness. For VCC = 20 V, fT peaked at about 1.5 GHz. A single cell was measured in common emitter mode with a collector supply voltage of 80 V in class AB at 425 MHz. A 100 μs pulse width with 10% duty cycle was used. A maximum output power of 50 W for a single cell was achieved. The peak large signal power gain was 9.6 dB. The collector efficiency at the power output of 50 W was 51% with a power gain of 9.3 dB. This represents the first demonstration of a SiC RF BJT.

Spatial Scale Interactions and Visual-Tracking Performance

Perception ◽  
1997 ◽  
Vol 26 (8) ◽  
pp. 1047-1058 ◽  
Author(s):  
Howard C Hughes ◽  
David M Aronchick ◽  
Michael D Nelson
Keyword(s):  
Spatial Frequency ◽  
High Frequency ◽  
Visual Information ◽  
Low Frequency ◽  
High Spatial Frequency ◽  
Performance Measure ◽  
High Frequency Component ◽  
Stimulus Velocity ◽  
Spatial Frequencies ◽  
Wide Range

It has previously been observed that low spatial frequencies (≤ 1.0 cycles deg−1) tend to dominate high spatial frequencies (≥ 5.0 cycles deg−1) in several types of visual-information-processing tasks. This earlier work employed reaction times as the primary performance measure and the present experiments address the possibility of low-frequency dominance by evaluating visually guided performance of a completely different response system: the control of slow-pursuit eye movements. Slow-pursuit gains (eye velocity/stimulus velocity) were obtained while observers attempted to track the motion of a sine-wave grating. The drifting gratings were presented on three types of background: a uniform background, a background consisting of a stationary grating, or a flickering background. Low-frequency dominance was evident over a wide range of velocities, in that a stationary high-frequency component produced little disruption in the pursuit of a drifting low spatial frequency, but a stationary low frequency interfered substantially with the tracking of a moving high spatial frequency. Pursuit was unaffected by temporal modulation of the background, suggesting that these effects are due to the spatial characteristics of the stationary grating. Similar asymmetries were observed with respect to the stability of fixation: active fixation was less stable in the presence of a drifting low frequency than in the presence of a drifting high frequency.

Development of Sound Absorbers for Large Spaces

2005 ◽  
Vol 12 (4) ◽  
pp. 237-254
Author(s):  
Yoshihito Kobayashi ◽  
Toshiya Kitamura ◽  
Shinji Yamada
Keyword(s):  
Absorption Coefficient ◽  
Resonance Frequency ◽  
High Frequency ◽  
Sound Absorption ◽  
Low Frequency ◽  
Frequency Bands ◽  
Sound Fields ◽  
Absorption Area ◽  
Translucent Material ◽  
The Chairs

Moulded chairs have been developed, in which sound absorption at low frequency bands is increased by using the seat section and/or the back section as a resonator. In addition, a translucent sound absorption panel has been developed for application in large spaces. In the case of the chairs the resonance frequency, determined by the position, number, and depth of the holes, was examined. Prototypes were constructed, and the equivalent absorption area was measured in a reverberation room. The resonators of the chairs achieved an equivalent absorption area of 0.15 m2/seat, in the 125 Hz band. For the case of the translucent material, sound absorption was measured and compared with conventional sound absorption materials. The panels were designed in order to control sound fields in large spaces. The panels achieved a sound absorption coefficient of 0.6 to 1.0 at middle and high frequency bands.

scholarly journals A reassessment of frequency and vocabulary size in L2 vocabulary teaching

2012 ◽  
Vol 47 (4) ◽  
pp. 484-503 ◽  
Author(s):  
Norbert Schmitt ◽  
Diane Schmitt
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
Lexical Resources ◽  
Vocabulary Size ◽  
Authentic Texts ◽  
Word Families ◽  
Wide Range ◽  
English Usage ◽  
Graded Readers ◽  
L2 Vocabulary

The high-frequency vocabulary of English has traditionally been thought to consist of the 2,000 most frequent word families, and low-frequency vocabulary as that beyond the 10,000 frequency level. This paper argues that these boundaries should be reassessed on pedagogic grounds. Based on a number of perspectives (including frequency and acquisition studies, the amount of vocabulary necessary for English usage, the range of graded readers, and dictionary defining vocabulary), we argue that high-frequency English vocabulary should include the most frequent 3,000 word families. We also propose that the low-frequency vocabulary boundary should be lowered to the 9,000 level, on the basis that 8–9,000 word families are sufficient to provide the lexical resources necessary to be able to read a wide range of authentic texts (Nation 2006). We label the vocabulary between high-frequency (3,000) and low-frequency (9,000+) as mid-frequency vocabulary. We illustrate the necessity of mid-frequency vocabulary for proficient language use, and make some initial suggestions for research addressing the pedagogical challenge raised by mid-frequency vocabulary.

scholarly journals Investigation of Flow Around a Slender Body at High Angles of Attack

2019 ◽  
Vol 30 (1) ◽  
pp. 51-61
Author(s):  
Ibraheem AlQadi Ibraheem AlQadi
Keyword(s):  
High Frequency ◽  
Low Frequency ◽  
The Body ◽  
Slender Body ◽  
Frequency Mode ◽  
Dynamic Mode ◽  
High Frequency Mode ◽  
Wide Range ◽  
Low Frequency Mode ◽  
High Angles Of Attack

A numerical investigation of flow around a slender body at high angles of attack is presented. Large eddy simulation of the flow around an ogive-cylinder body at high angles of attack is carried out. Asymmetric vortex flow was observed at angles of attack of α = 55◦ and 65◦ . The results showed that the phenomenon is present in the absence of artificial geometrical or flow perturbation. Contrary to the accepted notion that flow asymmetry is due to a convective instability, the development of vortex asymmetry in the absence of perturbations indicates the existence of absolute instability. An investigation of the unsteady flow field was carried out using dynamic mode decomposition. The analysis identified two distinct unsteady modes; high-frequency mode and low-frequency mode. At angle of attack 45◦ the high-frequency mode is dominant in the frontal part of the body and the low-frequency mode is dominant at the rear part. At α = 55◦ , the highfrequency mode is dominant downstream of vortex breakdown. At α = 65◦ , the spectrum shows a wide range of modes. Reconstruction of the dynamical modes shows that the low-frequency mode is associated with the unsteady wake and the high-frequency mode is associated with unsteady shear layer.

Sign in / Sign up

Export Citation Format

Share Document