scholarly journals CDISC SDTM Laboratory Analytical Method Calculation Formula Terminology

2020 ◽  
Author(s):  
Keyword(s):  
Analytical Method ◽  
Calculation Formula ◽  
Method Calculation

scholarly journals RESEARCH METHOD FOR IDENTIFICATION OF URBAN DEVELOPMENT FACILITIES CONTAINING IMPROVEMENT OF AERATION OF CITY TERRITORY

2019 ◽  
pp. 554-558
Author(s):  
D.S.Kydyraliev
Keyword(s):  
Urban Development ◽  
Analytical Method ◽  
Research Method ◽  
Construction Site ◽  
Method Calculation ◽  
The Town

In given article is given methods of the studies on revealing the building facilities, promoting improvement to aerations of the town construction site in Bishkek, as well as earl analytical method calculation wind mode of the territory of the region.

Lateral Buckling Studied of Rectangular Plate with Two Opposite Edges Clamped under the Action of a Concentrated Loads

2013 ◽  
Vol 671-674 ◽  
pp. 1600-1603
Author(s):  
Song Jin Wu ◽  
Li Qiang Jiang ◽  
Wei Ning Yuan
Keyword(s):  
Finite Element ◽  
Critical Load ◽  
Engineering Design ◽  
Rectangular Plate ◽  
Analytical Method ◽  
Calculation Formula ◽  
Lateral Buckling ◽  
Concentrated Load ◽  
Finite Element Software ◽  
Ansys Analysis

This study is focus on investigating the lateral buckling of the rectangular plate with two opposite edges clamped under the action of concentrated load. A analytical method of thirty rectangular plate which fixed at two opposite edges with one hundred and fifty buckling modality of concentrated load has been calculated by using the ANSYS finite element software. The curves of lateral buckling minimum critical load could be achieved by the calculation. Compared with the results from the existing calculation formula, the limitation applicability of the formula would be determined. To have a better agreement with ANSYS analysis results, this formula would be corrected by the analysis of the comparison between existing formula and ANSYS results. This research could provide effective methods for engineering design.

scholarly journals Perhitungan Value at Risk Pada Portfolio Optimal: Studi Perbandingan Saham Syariah dan Saham Konvensional

IKONOMIKA ◽  
2017 ◽  
Vol 2 (1) ◽  
Author(s):  
Sri Astuti Heryanti
Keyword(s):  
At Risk ◽  
Quantitative Analysis ◽  
Empirical Evidence ◽  
Analytical Method ◽  
Value At Risk ◽  
T Test ◽  
Optimal Portfolio ◽  
Method Calculation ◽  
The Difference ◽  
Level Of Risk

The aim of this study was to obtain empirical evidence about the difference between the level of risk when investing stocks in the Islamic and conventional by using Value at Risk (VaR). The object of research including consistent stock in the Jakarta Islamic Index and LQ45. The analytical method used in this research is quantitative analysis consisting of the establishment of the optimal portfolio by Markowitz method, calculation of VaR and testing the differences with Independent sample t-test. This study indicated that the value every stock can be reduced by diversifying through the establishment of an optimal portfolio. Based on the calculation Independent sample t-test, it is known that there is no difference between VaR of Islamic stocks and conventional stocks.

Densitometric Identification of Primitive Erythroblasts After Reaction With Diaminobenzidine

1973 ◽  
Vol 31 ◽  
pp. 328-329
Author(s):  
John A. Trotter
Keyword(s):  
Red Blood Cells ◽  
Analytical Method ◽  
Blood Cells ◽  
Guinea Pigs ◽  
Specific Protein ◽  
Visual Examination ◽  
Hemoglobin Synthesis ◽  
Peroxidatic Activity ◽  
Small Density

Hemoglobin is the specific protein of red blood cells. Those cells in which hemoglobin synthesis is initiated are the earliest cells that can presently be considered to be committed to erythropoiesis. In order to identify such early cells electron microscopically, we have made use of the peroxidatic activity of hemoglobin by reacting the marrow of erythropoietically stimulated guinea pigs with diaminobenzidine (DAB). The reaction product appeared as a diffuse and amorphous electron opacity throughout the cytoplasm of reactive cells. The detection of small density increases of such a diffuse nature required an analytical method more sensitive and reliable than the visual examination of micrographs. A procedure was therefore devised for the evaluation of micrographs (negatives) with a densitometer (Weston Photographic Analyzer).

Bulk standards for low-temperature biological x-ray microanalysis

1984 ◽  
Vol 42 ◽  
pp. 282-283
Author(s):  
P. Echlin ◽  
M. McKoon ◽  
E.S. Taylor ◽  
C.E. Thomas ◽  
K.L. Maloney ◽  
...  
Keyword(s):  
Phase Separation ◽  
Low Temperature ◽  
Analytical Method ◽  
Salt Solutions ◽  
Absolute Concentration ◽  
Cooling Process ◽  
X Ray ◽  
The Absolute ◽  
Analytical Procedures ◽  
Electrical Conductors

Although sections of frozen salt solutions have been used as standards for x-ray microanalysis, such solutions are less useful when analysed in the bulk form. They are poor thermal and electrical conductors and severe phase separation occurs during the cooling process. Following a suggestion by Whitecross et al we have made up a series of salt solutions containing a small amount of graphite to improve the sample conductivity. In addition, we have incorporated a polymer to ensure the formation of microcrystalline ice and a consequent homogenity of salt dispersion within the frozen matrix. The mixtures have been used to standardize the analytical procedures applied to frozen hydrated bulk specimens based on the peak/background analytical method and to measure the absolute concentration of elements in developing roots.

Cognitive Processing of Film Cuts Among 4- to 8-Year-Old Children

2012 ◽  
Vol 17 (4) ◽  
pp. 257-265 ◽  
Author(s):  
Carmen Munk ◽  
Günter Daniel Rey ◽  
Anna Katharina Diergarten ◽  
Gerhild Nieding ◽  
Wolfgang Schneider ◽  
...  
Keyword(s):  
Eye Movements ◽  
Cognitive Processing ◽  
Media Literacy ◽  
Age Groups ◽  
Reaction Times ◽  
Time Span ◽  
Short Film ◽  
Calculation Formula ◽  
Eye Tracker ◽  
Chronological Sequence

An eye tracker experiment investigated 4-, 6-, and 8-year old children’s cognitive processing of film cuts. Nine short film sequences with or without editing errors were presented to 79 children. Eye movements up to 400 ms after the targeted film cuts were measured and analyzed using a new calculation formula based on Manhattan Metrics. No age effects were found for jump cuts (i.e., small movement discontinuities in a film). However, disturbances resulting from reversed-angle shots (i.e., a switch of the left-right position of actors in successive shots) led to increased reaction times between 6- and 8-year old children, whereas children of all age groups had difficulties coping with narrative discontinuity (i.e., the canonical chronological sequence of film actions is disrupted). Furthermore, 4-year old children showed a greater number of overall eye movements than 6- and 8-year old children. This indicates that some viewing skills are developed between 4 and 6 years of age. The results of the study provide evidence of a crucial time span of knowledge acquisition for television-based media literacy between 4 and 8 years.

The synephrine content of Shiikuwasha (Citrus depressa HAYATA) fruit: Analytical method and change during fruit growth

Planta Medica ◽  
2008 ◽  
Vol 74 (09) ◽  
Author(s):  
K Miyagi ◽  
T Fujise ◽  
N Koga ◽  
K Wada ◽  
M Yano ◽  
...  
Keyword(s):  
Analytical Method ◽  
Fruit Growth ◽  
Citrus Depressa

A novel analytical calculation of magnetic field in the slotted air gap of spoke-type permanent-magnet machines using conformal mapping

2020 ◽  
pp. 1-15
Author(s):  
Jianqi Li ◽  
Yu Zhou ◽  
Jianying Li
Keyword(s):  
Magnetic Field ◽  
Conformal Mapping ◽  
Permanent Magnet ◽  
Flux Density ◽  
Analytical Method ◽  
Electromotive Force ◽  
Analytical Calculation ◽  
Air Gap ◽  
Permanent Magnet Machines ◽  
Peak Value

This paper presented a novel analytical method for calculating magnetic field in the slotted air gap of spoke-type permanent-magnet machines using conformal mapping. Firstly, flux density without slots and complex relative air-gap permeance of slotted air gap are derived from conformal transformation separately. Secondly, they are combined in order to obtain normalized flux density taking account into the slots effect. The finite element (FE) results confirmed the validity of the analytical method for predicting magnetic field and back electromotive force (BEMF) in the slotted air gap of spoke-type permanent-magnet machines. In comparison with FE result, the analytical solution yields higher peak value of cogging torque.

IMPLEMENTASI JOB ORDER COSTING METHOD DALAM PERHITUNGAN HARGA POKOK PRODUKSI MAP

2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita
Keyword(s):  
Production Process ◽  
Quantitative Data ◽  
Production Cost ◽  
Qualitative Data ◽  
Cost Data ◽  
Method Calculation ◽  
Cost Of Production ◽  
The Right ◽  
The Cost

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method

Sign in / Sign up

Export Citation Format

Share Document