A method to calculate the reactive power of iced transmission line based on Poynting vector and FDFD

2016 ◽  
Vol 50 (3) ◽  
pp. 417-433 ◽  
Author(s):  
Peng Cheng ◽  
Fan Yang ◽  
Hanwu Luo ◽  
Haibo Guo ◽  
Wei Ran ◽  
...  
Keyword(s):  
Transmission Line ◽  
Poynting Vector ◽  
Reactive Power

ANN-Based Relaying Algorithm for Protection of SVC- Compensated AC Transmission Line and Criticality Analysis of a Digital Relay

2020 ◽  
Vol 13 (3) ◽  
pp. 381-393
Author(s):  
Farhana Fayaz ◽  
Gobind Lal Pahuja
Keyword(s):  
Transmission Line ◽  
Failure Modes ◽  
Reactive Power ◽  
Circuit Breaker ◽  
Research Work ◽  
Back Propagation ◽  
Static Var Compensator ◽  
Data Set ◽  
Ac Transmission ◽  
Criticality Analysis

Background:The Static VAR Compensator (SVC) has the capability of improving reliability, operation and control of the transmission system thereby improving the dynamic performance of power system. SVC is a widely used shunt FACTS device, which is an important tool for the reactive power compensation in high voltage AC transmission systems. The transmission lines compensated with the SVC may experience faults and hence need a protection system against the damage caused by these faults as well as provide the uninterrupted supply of power.Methods:The research work reported in the paper is a successful attempt to reduce the time to detect faults on a SVC-compensated transmission line to less than quarter of a cycle. The relay algorithm involves two ANNs, one for detection and the other for classification of faults, including the identification of the faulted phase/phases. RMS (Root Mean Square) values of line voltages and ratios of sequence components of line currents are used as inputs to the ANNs. Extensive training and testing of the two ANNs have been carried out using the data generated by simulating an SVC-compensated transmission line in PSCAD at a signal sampling frequency of 1 kHz. Back-propagation method has been used for the training and testing. Also the criticality analysis of the existing relay and the modified relay has been done using three fault tree importance measures i.e., Fussell-Vesely (FV) Importance, Risk Achievement Worth (RAW) and Risk Reduction Worth (RRW).Results:It is found that the relay detects any type of fault occurring anywhere on the line with 100% accuracy within a short time of 4 ms. It also classifies the type of the fault and indicates the faulted phase or phases, as the case may be, with 100% accuracy within 15 ms, that is well before a circuit breaker can clear the fault. As demonstrated, fault detection and classification by the use of ANNs is reliable and accurate when a large data set is available for training. The results from the criticality analysis show that the criticality ranking varies in both the designs (existing relay and the existing modified relay) and the ranking of the improved measurement system in the modified relay changes from 2 to 4.Conclusion:A relaying algorithm is proposed for the protection of transmission line compensated with Static Var Compensator (SVC) and criticality ranking of different failure modes of a digital relay is carried out. The proposed scheme has significant advantages over more traditional relaying algorithms. It is suitable for high resistance faults and is not affected by the inception angle nor by the location of fault.

Performance Analysis on Transmission Line for Improvement of Load Flow

2012 ◽  
Vol 433-440 ◽  
pp. 7208-7212
Author(s):  
Ya Min Su Hlaing ◽  
Ze Ya Aung
Keyword(s):  
Steady State ◽  
Power System ◽  
Transmission Line ◽  
Power Flow ◽  
Reactive Power ◽  
Load Flow ◽  
Electric Power System ◽  
Steady State Condition ◽  
Newton Raphson ◽  
Raphson Method

This thesis implements power flow application, Newton-Raphson method. The Newton-Raphson method is mainly employed in the solution of power flow problems. The network of Myanma electric power system is used as the reference case. The system network contains 90 buses and 106 brunches. The weak points are found in the network by using Newton-Raphson method. Bus 16, 17, 85 and 86 have the most weak bus voltages. The medium transmission line between bus 87 and bus 17 is compensated by using MATLAB program software. The transmission line is compensated with shunt reactors, series and shunt capacitors to improve transient and steady-state stability, more economical loading, and minimum voltage dip on load buses and to supply the requisite reactive power to maintain the receiving end voltage at a satisfactory level. The system performance is tested under steady-state condition. This paper investigates and improves the steady–state operation of Myanma Power System Network.

scholarly journals Real and Reactive Power Control by using 48-pulse Series Connected Three-level NPC Converter for UPFC

2011 ◽  
pp. 1-5
Author(s):  
A. Naveena ◽  
M.Venkateswara Rao
Keyword(s):  
Transmission Line ◽  
Power Flow ◽  
Reactive Power ◽  
System Stability ◽  
Unified Power Flow Controller ◽  
Control Mechanisms ◽  
Active And Reactive Power ◽  
Reactive Power Flow ◽  
Flow Controller ◽  
Power Flow Controller

The equipments based on the power electronics have been improved under the name of Flexible Alternating Current Transmission Systems (FACTS) in the last years. Unified Power Flow Controller (UPFC) is the most widely used FACTS device to control the power flow and to optimize the system stability in the transmission line. UPFC is a FACTS devices that can control active and reactive power flow in transmission line by means of injection controllable series voltage to the transmission line. This paper proposes a new connection for a Unified Power Flow Controller (UPFC) to control the active and reactive power flow control in two sides of a transmission line independently and it regulates bus voltage in the same transmission line, furthermore it is possible to balance line current too. This connection of the UPFC will be called an center node UPFC (C_UPFC). It is one of the newest devices within the FACTS technology. The structure and capability of the C_UPFC is discussed and its control scheme is based on the d-q orthogonal coordinates. According to this, the performance of UPFC for several modes of operations using different control mechanisms based on Proportional-Integral (PI) and PID based controllers has been studied. The obtained simulation results from Matlab/simulink confirm the effective features.

scholarly journals Steady State Analysis of a UPFC as Voltage Regulator for Optimal Position in the Transmission Line

2003 ◽  
Vol 8 (1) ◽  
pp. 55
Author(s):  
S. Ali Al-Mawsawi ◽  
Mohammed R. Qader
Keyword(s):  
Steady State ◽  
Transmission Line ◽  
Power Flow ◽  
Pulse Width Modulation ◽  
Reactive Power ◽  
Voltage Regulator ◽  
Unified Power Flow Controller ◽  
Optimal Position ◽  
System A ◽  
Power Flow Controller

It has recently been illustrated that the Unified Power Flow Controller (UPFC) installation location plays an important role in effecting nonlinearly in the UPFC steady state performance of the system. A Pulse Width Modulation (PWM) based on UPFC as a voltage regulator is modeled and analyzed to investigate the optimal position in the transmission line. From the study made in this paper, it is shown that the location of UPFC plays a significant part in effecting nonlinearly. It is also found from the simulation results that the distribution of the active and reactive power flows can be controlled by varying the modulation index of the device. 

Sign in / Sign up

Export Citation Format

Share Document