Experimental study and finite element analysis for piezoelectric impact energy harvesting using a bent metal beam

2014 ◽  
Vol 46 (4) ◽  
pp. 895-904 ◽  
Author(s):  
Song-Mao Chen ◽  
Jin-Juan Zhou ◽  
Jun-Hui Hu
Keyword(s):  
Finite Element Analysis ◽  
Experimental Study ◽  
Finite Element ◽  
Energy Harvesting ◽  
Impact Energy ◽  
Element Analysis

Failure analysis of simple overlap bonding joints and numerical investigation of the adhered tip geometry effect on the joint strength

2021 ◽  
Vol 63 (11) ◽  
pp. 1007-1011
Author(s):  
İsmail Saraç
Keyword(s):  
Finite Element Analysis ◽  
Experimental Study ◽  
Finite Element ◽  
Reference Model ◽  
Lap Joints ◽  
Shear Stresses ◽  
Element Analysis ◽  
Single Lap Joints ◽  
Failure Loads ◽  
Previous Experimental Study

Abstract This study was carried out in two stages. In the first step, a numerical study was performed to verify the previous experimental study. In accordance with the previous experimental study data, single lap joints models were created using the ANSYS finite element analysis program. Then, nonlinear stress and failure analyses were performed by applying the failure loads obtained in the experimental study. The maximum stress theory was used to find finite element failure loads of the single lap joints models. As a result of the finite element analysis, an approximate 80 % agreement was found between experimental and numerical results. In the second step of the study, in order to increase the bond strength, different overlap end geometry models were produced and peel and shear stresses in the adhesive layer were compared according to the reference model. As a result of the analyses, significant strength increases were calculated according to the reference model. The strength increase in model 3 and model 5 was found to be 80 % and 67 %, respectively, relative to the reference model.

Energy Harvesting From Droplet Interface Bilayers

2015 ◽  
Author(s):  
Ashok K. Kancharala ◽  
Eric Freeman ◽  
Michael K. Philen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Energy Harvesting ◽  
Nonlinear Finite Element ◽  
Time Dependent ◽  
External Excitation ◽  
Biologically Inspired ◽  
Element Analysis ◽  
Interfacial Membrane ◽  
Membrane Deflection

Biologically inspired droplet interface bilayers have found applications in the development of hair cell sensors and other mechanotransduction applications. In this research, the flexoelectric capability of the droplet bilayers under external excitation is explored for energy harvesting. Traditionally, membrane capacitance models are being used for inferring the magnitude of the membrane deflection which do not account for the relation between the applied force or deflection and the deflection of the interfacial membrane and time dependent variations. In this work, the dynamic behavior of the droplets under external excitation has been modeled using nonlinear finite element analysis. A flexoelectric model including mechanical, electrical, and chemical sensitivities has been developed and coupled with the calculated bilayer deformations to predict the mechanotransductive response of the droplets under excitation. Using the developed framework, the possibilities of energy harvesting for different droplet configurations have been investigated and reported.

scholarly journals Development of a hybrid vibration converter for real vibration source / Entwicklung eines Hybrid-Vibrationswandlers für eine echte Schwingungsquelle

2019 ◽  
Vol 86 (s1) ◽  
pp. 57-61 ◽  
Author(s):  
Sonia Bradai ◽  
Slim Naifar ◽  
Olfa Kanoun
Keyword(s):  
Magnetic Field ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Energy Harvesting ◽  
Resonant Frequency ◽  
Ambient Vibration ◽  
Vibration Source ◽  
Frequency Bandwidth ◽  
Element Analysis ◽  
The Magnetic Field

AbstractHarvesting energy from ambient vibration sources is challenging due to its low characteristic amplitude and frequencies. In this purpose, this work presents a compact hybrid vibration converter based on electromagnetic and magnetoelectric principles working for a frequency bandwidth and under real vibration source properties. The combination of especially these two principles is mainly due to the fact that both converters can use the same changes of the magnetic field for energy harvesting. The converter was investigated using finite element analysis and validated experimentally. Results have shown that a frequency bandwidth up to 12 Hz with a characteristic resonant frequency at 24 Hz and a power density of 0.11mW/cm3 can be reached.

scholarly journals Finite Element Analysis of Impact Energy on Spur Gear

2018 ◽  
Vol 225 ◽  
pp. 06011 ◽  
Author(s):  
Ismail Ali Bin Abdul Aziz ◽  
Daing Mohamad Nafiz Bin Daing Idris ◽  
Mohd Hasnun Arif Bin Hassan ◽  
Mohamad Firdaus Bin Basrawi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Impact Energy ◽  
High Speed ◽  
Impact Test ◽  
Impact Load ◽  
Gear Tooth ◽  
Test Equipment ◽  
Element Analysis ◽  
The Impact

In high-speed gear drive and power transmission, system impact failure mode always occurs due to the sudden impact and shock loading during the system in running. Therefore, study on the amount of impact energy that can be absorbed by a gear is vital. Impact test equipment has been designed and modelled for the purpose to study the impact energy on gear tooth. This paper mainly focused on Finite Element Analysis (FEA) of impact energy that occurred during simulation involving the impact test equipment modelling. The simulation was conducted using Abaqus software on critical parts of the test equipment to simulate the impact event and generate impact data for analysis. The load cell in the model was assumed to be free fall at a certain height which gives impact load to the test gear. Three different type of material for the test gear were set up in this simulation. Results from the simulation show that each material possesses different impact energy characteristic. Impact energy values increased along with the height of load drop. AISI 1040 were found to be the toughest material at 3.0m drop that could withstand up to 44.87N.m of impact energy. These data will be used to validate data in physical experiments in further study.

Sign in / Sign up

Export Citation Format

Share Document