scholarly journals The effects of stenting on hemorheological parameters: An in vitro investigation under various blood flow conditions

2019 ◽  
Vol 72 (4) ◽  
pp. 375-393
Author(s):  
K. Kapnisis ◽  
H. Seidner ◽  
M. Prokopi ◽  
D. Pasias ◽  
C. Pitsillides ◽  
...  
Keyword(s):  
Flow Rate ◽  
Limited Information ◽  
Rbc Membrane ◽  
Nitinol Stents ◽  
In Vitro Investigation ◽  
Rbc Aggregation ◽  
Flow Through ◽  
Elongation Index ◽  
And Control

 Despite their wide clinical usage, stent functionality may be compromised by complications at the site of implantation, including early/late stent thrombosis and occlusion. Although several studies have described the effect of fluid-structure interaction on local haemodynamics, there is yet limited information on the effect of the stent presence on specific hemorheological parameters. The current work investigates the red blood cell (RBC) mechanical behavior and physiological changes as a result of flow through stented vessels. Blood samples from healthy volunteers were prepared as RBC suspensions in plasma and in phosphate buffer saline at 45% haematocrit. Self-expanding nitinol stents were inserted in clear perfluoroalkoxy alkane tubing which was connected to a syringe, and integrated in a syringe pump. The samples were tested at flow rates of 17.5, 35 and 70 ml/min, and control tests were performed in non-stented vessels. For each flow rate, the sample viscosity, RBC aggregation and deformability, and RBC lysis were estimated. The results indicate that the presence of a stent in a vessel has an influence on the hemorheological characteristics of blood. The viscosity of all samples increases slightly with the increase of the flow rate and exposure. RBC aggregation and elongation index (EI) decrease as the flow rate and exposure increases. RBC lysis for the extreme cases is evident. The results indicate that the stresses developed in the stent area for the extreme conditions could be sufficiently high to influence the integrity of the RBC membrane.

scholarly journals Osseodensification Drilling vs. Standard Protocol of Implant Site Preparation: An In Vitro Study on Polyurethane Foam Sheets

Prosthesis ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. 76-86
Author(s):  
Luca Comuzzi ◽  
Margherita Tumedei ◽  
Adriano Piattelli ◽  
Giovanna Iezzi
Keyword(s):  
Polyurethane Foam ◽  
Cortical Layer ◽  
Polyurethane Foams ◽  
Insertion Torque ◽  
Standard Type ◽  
Removal Torque ◽  
In Vitro Investigation ◽  
Posterior Maxilla ◽  
And Control

(1) Background: The aim of the present in vitro investigation was to evaluate, on polyurethane sheets, two different drilling techniques for dental implant positioning using osteocondensing burs compared to a standard type protocol. (2) Methods: Three different implant designs (Implacil De Bortoli UN III 4 × 10 mm, Restore RBM 4 (HEX) × 10 mm; Implacil De Bortoli UN II 4 × 10 mm) were evaluated (test implant (osteocondensing drills) and control implant (standard drills)). The insertion torque (IT), the removal torque (RT) and the resonance frequency analysis (RFA) values of test and control implants inserted in different size and different density polyurethane foam models were compared for 120 experimental sites. Accordingly, 120 experimental holes were produced in different PCF polyurethane foams: 60 sites were produced in 10 PCF sheets and 60 sites in 10 PCF sheets with an additional 1 mm layer of 30 PCF. (3) Results: The IT, removal torque and RFA values were significantly higher for both of the evaluated implants, in the sites prepared with the osteocondenser drills when compared to sites prepared with standard drills (p < 0.05). The UNII and UN III showed significantly higher stability compared to the HEX implant; these differences increased drastically in the 10 PCF Polyurethane Block with the additional 1 mm cortical layer (p < 0.05). (4) Conclusions: The outcome of this investigation suggested a possible clinical application of osteocondensing burs in case of reduced bone quality and quantity in the posterior maxilla.

scholarly journals Assessment of Fibrinogen Macromolecules Interaction with Red Blood Cells Membrane by Means of Laser Aggregometry, Flow Cytometry, and Optical Tweezers Combined with Microfluidics

Biomolecules ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1448
Author(s):  
Alexey N. Semenov ◽  
Andrei E. Lugovtsov ◽  
Evgeny A. Shirshin ◽  
Boris P. Yakimov ◽  
Petr B. Ermolinskiy ◽  
...  
Keyword(s):  
Red Blood Cells ◽  
Optical Tweezers ◽  
Blood Cells ◽  
Significant Risk ◽  
In Vitro Study ◽  
Significant Risk Factor ◽  
Elevated Concentration ◽  
Rbc Membrane ◽  
Rbc Aggregation

An elevated concentration of fibrinogen in blood is a significant risk factor during many pathological diseases, as it leads to an increase in red blood cells (RBC) aggregation, resulting in hemorheological disorders. Despite the biomedical importance, the mechanisms of fibrinogen-induced RBC aggregation are still debatable. One of the discussed models is the non-specific adsorption of fibrinogen macromolecules onto the RBC membrane, leading to the cells bridging in aggregates. However, recent works point to the specific character of the interaction between fibrinogen and the RBC membrane. Fibrinogen is the major physiological ligand of glycoproteins receptors IIbIIIa (GPIIbIIIa or αIIββ3 or CD41/CD61). Inhibitors of GPIIbIIIa are widely used in clinics for the treatment of various cardiovascular diseases as antiplatelets agents preventing the platelets’ aggregation. However, the effects of GPIIbIIIa inhibition on RBC aggregation are not sufficiently well studied. The objective of the present work was the complex multimodal in vitro study of the interaction between fibrinogen and the RBC membrane, revealing the role of GPIIbIIIa in the specificity of binding of fibrinogen by the RBC membrane and its involvement in the cells’ aggregation process. We demonstrate that GPIIbIIIa inhibition leads to a significant decrease in the adsorption of fibrinogen macromolecules onto the membrane, resulting in the reduction of RBC aggregation. We show that the mechanisms underlying these effects are governed by a decrease in the bridging components of RBC aggregation forces.

Ultrastructural Changes in Tumor Cells During Human Peripheral Blood Monocyte-Mediated Cytotoxicity

1981 ◽  
Vol 39 ◽  
pp. 452-453
Author(s):  
K. E. Muse ◽  
D. G. Fischer ◽  
H. S. Koren
Keyword(s):  
Target Cell ◽  
Human Peripheral Blood ◽  
Mononuclear Phagocytes ◽  
Ultrastructural Changes ◽  
Target Cells ◽  
Limited Information ◽  
Blood Monocytes ◽  
Tumoricidal Activity ◽  
Activated State

Mononuclear phagocytes, a pluripotential cell line, manifest an array of basic extracellular functions. Among these physiological regulatory functions is the expression of spontaneous cytolytic potential against tumor cell targets.The limited observations on human cells, almost exclusively blood monocytes, initially reported limited or a lack of tumoricidal activity in the absence of antibody. More recently, freshly obtained monocytes have been reported to spontaneously impair the biability of tumor target cells in vitro (Harowitz et al., 1979; Montavani et al., 1979; Hammerstrom, 1979). Although the mechanism by which effector cells express cytotoxicity is poorly understood, discrete steps can be distinguished in the process of cell mediated cytotoxicity: recognition and binding of effector to target cells,a lethal-hit stage, and subsequent lysis of the target cell. Other important parameters in monocyte-mediated cytotoxicity include, activated state of the monocyte, effector cell concentrations, and target cell suseptibility. However, limited information is available with regard to the ultrastructural changes accompanying monocyte-mediated cytotoxicity.

In vitro investigation of Varizella zoster virus as an oncolytic virus in glioblastoma therapy

2008 ◽  
Vol 35 (S 01) ◽  
Author(s):  
H Leske ◽  
A Baiker ◽  
C Schichor ◽  
J.C Tonn ◽  
R Goldbrunner ◽  
...  
Keyword(s):  
Oncolytic Virus ◽  
In Vitro Investigation ◽  
Varizella Zoster Virus

Recirculation versus flow-through rainbow trout laboratory Flavobacterium columnare challenge

2020 ◽  
Vol 139 ◽  
pp. 213-221
Author(s):  
C Birkett ◽  
R Lipscomb ◽  
T Moreland ◽  
T Leeds ◽  
JP Evenhuis
Keyword(s):  
Rainbow Trout ◽  
Environmental Parameters ◽  
Cumulative Effects ◽  
Flavobacterium Columnare ◽  
Replacement Rate ◽  
Bacterial Concentration ◽  
Water Replacement ◽  
Dose Concentration ◽  
Flow Through ◽  
And Control

Flavobacterium columnare immersion challenges are affected by water-related environmental parameters and thus are difficult to reproduce. Whereas these challenges are typically conducted using flow-through systems, use of a recirculating challenge system to control environmental parameters may improve reproducibility. We compared mortality, bacterial concentration, and environmental parameters between flow-through and recirculating immersion challenge systems under laboratory conditions using 20 rainbow trout families. Despite identical dose concentration (1:75 dilution), duration of challenge, lot of fish, and temperature, average mortality in the recirculating system (42%) was lower (p < 0.01) compared to the flow-through system (77%), and there was low correlation (r = 0.24) of family mortality. Mean days to death (3.25 vs. 2.99 d) and aquaria-to-aquaria variation (9.6 vs. 10.4%) in the recirculating and flow-through systems, respectively, did not differ (p ≥ 0.30). Despite 10-fold lower water replacement rate in the recirculating (0.4 exchanges h-1) compared to flow-through system (4 exchanges h-1), differences in bacterial concentration between the 2 systems were modest (≤0.6 orders of magnitude) and inconsistent throughout the 21 d challenge. Compared to the flow-through system, dissolved oxygen during the 1 h exposure and pH were greater (p ≤ 0.02), and calcium and hardness were lower (p ≤ 0.03), in the recirculating system. Although this study was not designed to test effects of specific environmental parameters on mortality, it demonstrates that the cumulative effects of these parameters result in poor reproducibility. A recirculating immersion challenge model may be warranted to empirically identify and control environmental parameters affecting mortality and thus may serve as a more repeatable laboratory challenge model.

Stabilization of the Speed of the Hydraulic Motor Through Throttle Compensation for Volume Losses

2020 ◽  
Vol 26 (3) ◽  
pp. 126-130
Author(s):  
Krasimir Kalev
Keyword(s):  
Flow Rate ◽  
Hydraulic Drive ◽  
Pressure Change ◽  
Operating Conditions ◽  
Drive System ◽  
Inlet Pressure ◽  
Schematic Diagram ◽  
Hydraulic Characteristics ◽  
Hydraulic Motor ◽  
Flow Through

AbstractA schematic diagram of a hydraulic drive system is provided to stabilize the speed of the working body by compensating for volumetric losses in the hydraulic motor. The diagram shows the inclusion of an originally developed self-adjusting choke whose flow rate in the inlet pressure change range tends to reverse - with increasing pressure the flow through it decreases. Dependent on the hydraulic characteristics of the hydraulic motor and the specific operating conditions.

Study of fluid flow through a channel deformed by piezoelement

2018 ◽  
Vol 13 (3) ◽  
pp. 1-10 ◽  
Author(s):  
I.Sh. Nasibullayev ◽  
E.Sh Nasibullaeva ◽  
O.V. Darintsev
Keyword(s):  
Fluid Flow ◽  
Pressure Drop ◽  
Boundary Conditions ◽  
Flow Rate ◽  
Contact Surface ◽  
Piezoelectric Element ◽  
Neumann Boundary ◽  
Differential Pressure ◽  
Physical Parameters ◽  
Flow Through

The flow of a liquid through a tube deformed by a piezoelectric cell under a harmonic law is studied in this paper. Linear deformations are compared for the Dirichlet and Neumann boundary conditions on the contact surface of the tube and piezoelectric element. The flow of fluid through a deformed channel for two flow regimes is investigated: in a tube with one closed end due to deformation of the tube; for a tube with two open ends due to deformation of the tube and the differential pressure applied to the channel. The flow rate of the liquid is calculated as a function of the frequency of the deformations, the pressure drop and the physical parameters of the liquid.

Sign in / Sign up

Export Citation Format

Share Document