scholarly journals Seismic Performance Degeneration of Assembled Concrete Columns with Grouting Defects

2021 ◽  
Author(s):  
Shengcai Li ◽  
Shengxiang Shi ◽  
Zhongchen Zhou
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Seismic Energy ◽  
Concrete Columns ◽  
Monolithic Columns ◽  
Concrete Column ◽  
Test Results ◽  
Internal Defects ◽  
Energy Dissipation Capacity ◽  
Reinforcement Bar

In order to evaluate the influence of internal defects of semi-grouting sleeve connection on seismic performance of assembled monolithic columns, four specimens of assembled monolithic concrete column with semi grouting sleeve connecting reinforcement bar were fabricated with 10%, 20%, 30% internal defects. The test results show that (1) the assembled columns are all damaged by bending, the grouting layer of the assembled column can be pulled apart easily and the cracks develop more closely on the upper part of the sleeve; (2) the larger the internal defects in the sleeve, the less the cracks on the column, and the less sufficient the cracks development; (3) the seismic energy dissipation capacity of the column without defect is better than that of the defective columns.

Estimation of Seismic Energy Dissipation for Steel Slit Shear Walls Considering Out-of-Plane Buckling

2021 ◽  
Author(s):  
Yiming Ma ◽  
Liusheng He ◽  
Ming Li
Keyword(s):  
Energy Dissipation ◽  
Shear Walls ◽  
Seismic Energy ◽  
Thickness Ratio ◽  
Design Parameters ◽  
Test Results ◽  
Loading Test ◽  
Aspect Ratios ◽  
Out Of Plane ◽  
Energy Dissipation Capacity

Steel slit shear walls (SSSWs), made by cutting slits in steel plates, are increasingly adopted in seismic design of buildings for energy dissipation. This paper estimates the seismic energy dissipation capacity of SSSWs considering out-of-plane buckling. In the experimental study, three SSSW specimens were designed with different width-thickness ratios and aspect ratios and tested under quasi-static cyclic loading. Test results showed that the width-thickness ratio of the links dominated the occurrence of out-of-plane buckling, which produced pinching in the hysteresis and thus reduced the energy dissipation capacity. Out-of-plane buckling occurred earlier for the links with a larger width-thickness ratio, and vice versa. Refined finite element model was built for the SSSW specimens, and validated by the test results. The concept of average pinching parameter was proposed to quantify the degree of pinching in the hysteresis. Through the parametric analysis, an equation was derived to estimate the average pinching parameter of the SSSWs with different design parameters. A new method for estimating the energy dissipation of the SSSWs considering out-of-plane buckling was proposed, by which the predicted energy dissipation agreed well with the test results.

Experimental Study on Seismic Performance of the Reinforced Concrete Grid-Mesh Frame Wall

2013 ◽  
Vol 680 ◽  
pp. 234-238
Author(s):  
Jin Li Qiao ◽  
Wen Ling Tian ◽  
Ming Jie Zhou ◽  
Fang Lu Jiang ◽  
Kun Zhao
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Bearing Capacity ◽  
Seismic Performance ◽  
Seismic Energy ◽  
Width Ratio ◽  
Filling Material ◽  
Energy Dissipation Capacity ◽  
Grid Mesh

In order to validate the seismic performance of reinforced concrete grid-mesh frame wall , four grid frame walls in half size is made with different height-width ratios and different grid forms in the paper. Two of them are filling with cast-in-place plaster as filling material. According to the experimental results of these four walls subjected to horizontal reciprocating loads, we know that the grid-mesh frame wall's breaking form are in stages and multiple modes, and the main influencing factors are height-width ratio and grid form, what's more, with cast-in-place plaster as fill material, could not only improve the level of the wall bearing capacity and stiffness, but also improve the ductility and seismic energy dissipation capacity.

Seismic Rehabilitation of Beam-Column Joints Using FRP Sheets and Buckling Restrained Braces

2013 ◽  
Vol 479-480 ◽  
pp. 1170-1174
Author(s):  
Hee Cheul Kim ◽  
Dae Jin Kim ◽  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Seismic Performance ◽  
Reinforced Concrete Structures ◽  
Test Results ◽  
Seismic Rehabilitation ◽  
Buckling Restrained Braces ◽  
Column Joint ◽  
Energy Dissipation Capacity

The purpose of this study was to evaluate seismic performance of rehabilitated beam-column joint using FRP sheets and Buckling Restrained Braces (BRBs) and provide test data related to rehabilitated beam-column joints in reinforced concrete structures. The seismic performance of total six beam-column specimens is evaluated under cyclic loadings in terms of shear strength, effective stiffness, energy dissipation and ductility. The test results showed wrapping FRP sheets can contribute to increase the effect of confinement and the crack delay. Also retrofitting buckling restrained braces (BRBs) can improve the stiffness and energy dissipation capacity. Both FRP sheets and BRBs can effectively improve the strength, stiffness and ductility of seismically deficient beam-column joints.

Experimental Study on Seismic Performance of Steel Reinforced Recycled Concrete Column

2014 ◽  
Vol 501-504 ◽  
pp. 1580-1586
Author(s):  
Jian Yang Xue ◽  
Jian Peng Lin ◽  
Hui Ma
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Recycled Concrete ◽  
Recycled Aggregate ◽  
Concrete Column ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity

The pseudo-static tests were carried out on seven steel reinforced recycled concrete columns. The main parameters of specimens were recycled aggregate replacement ratio, axial compression ratio and volumetric stirrup ratio. The results indicate that the incorporation of recycled aggregate doesnt reduce the horizontal bearing capacity, ductility and the energy dissipation capacity of specimens and has little effect on seismic performance. The seismic performance of steel reinforced recycled concrete column decreases significantly in the high axial compression ratio. The ductility, horizontal bearing capacity and the energy dissipation capacity of the steel reinforced recycled concrete column increase with a rise in the volumetric stirrup ratio. This study provides a reference on the application of the steel reinforced recycled concrete column.

Seismic Behavior of Newly Constructed Three-Bay Steel X-Braced RC Space Frame

2014 ◽  
Vol 08 (04) ◽  
pp. 1450012
Author(s):  
Haozhi Tan ◽  
Liang Huang ◽  
Libo Yan ◽  
Hongwei Yi ◽  
Xin Tian
Keyword(s):  
Control System ◽  
Energy Dissipation ◽  
Failure Mechanism ◽  
Seismic Performance ◽  
Seismic Design ◽  
Seismic Behavior ◽  
Test Results ◽  
Space Frame ◽  
Plane Frames ◽  
Energy Dissipation Capacity

Bracing is one of the most effective systems which is widely used to improve the seismic performance of reinforced concrete (RC) plane frames. However, studies on the use of bracing in newly constructed RC space frame (RCSF) are rare. This paper presents the experimental results of two 1/4-scale, two-story, and three-bay RCSFs under cyclic loading. A RCSF without brace was designed and constructed as a control system, which was termed as "RCSF". Another one was constructed and strengthened with steel X-braces, which was termed as "SBRCSF". The seismic performance of RCSF was compared with those of SBRCSF. The test results show that compared with the RCSF, the seismic performance of the SBRCSF was improved significantly in terms of hysteresis loop, strength, stiffness degradation, and energy dissipation capacity. In addition, unlike the inter-story failure mechanism of the RCSF, the SBRCSF specimen exhibited an overall failure mechanism, which is significant for the seismic design of RCSFs. Moreover, the tested SBRCSF could bear loads in a manner similar to that of untested RCSF after the failure of the steel braces, thereby revealing the redundancy of SBRCSF and showing the advantageous of the use of steel braces for space frame.

A combined experimental and numerical analysis on the seismic behavior of short reinforced concrete columns with different structural sizes and axial compression ratios

2017 ◽  
Vol 27 (9) ◽  
pp. 1416-1447 ◽  
Author(s):  
Liu Jin ◽  
Shuai Zhang ◽  
Dong Li ◽  
Haibin Xu ◽  
Xiuli Du ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Behavior ◽  
Load Capacity ◽  
Concrete Columns ◽  
Simulation Method ◽  
Reinforced Concrete Columns ◽  
Mesoscopic Simulation ◽  
Energy Dissipation Capacity

The results of an experimental program on eight short reinforced concrete columns having different structural sizes and axial compression ratios subjected to monotonic/cyclic lateral loading were reported. A 3D mesoscopic simulation method for the analysis of mechanical properties of reinforced concrete members was established, and then it was utilized as an important supplement and extension of the traditional experimental method. Lots of numerical trials, based on the restricted experimental results and the proposed 3D mesoscopic simulation method, were carried out to sufficiently evaluate the seismic performances of short reinforced concrete columns with different structural sizes and axial compression ratios. The test results indicate that (1) the failure pattern of reinforced concrete columns can be significantly affected by the shear-span ratio; (2) increasing the axial compression ratio could improve the load capacity of the reinforced concrete column, but the deformation capacity would be restricted and the failure mode would be more brittle, consequently the energy dissipation capacity could be deteriorated; and (3) the load capacity, the displacement ductility, and the energy dissipation capacity of the short reinforced concrete columns all exhibit clear size effect, namely, the size effect could significantly affect the seismic behavior of reinforced concrete columns.

Experimental study on the seismic performance of traditional timber mortise-tenon joints with different looseness under low-cyclic reversed loading

2018 ◽  
Vol 22 (6) ◽  
pp. 1312-1328 ◽  
Author(s):  
Jianyang Xue ◽  
Rui Guo ◽  
Liangjie Qi ◽  
Dan Xu
Keyword(s):  
Energy Dissipation ◽  
Seismic Performance ◽  
Failure Modes ◽  
Artificial Defect ◽  
Reversed Loading ◽  
Energy Dissipation Capacity ◽  
Strength And Stiffness ◽  
Seismic Behaviors ◽  
Damage Type ◽  
Better Than

The majority of existing ancient timber structures have different degrees of damage. The looseness of mortise-tenon joints is a kind of typical damage type. In order to study the influence of looseness on the seismic performance of mortise-tenon joints, six through-tenon joints and six dovetail-tenon joints with scale 1:3.2 were fabricated according to the requirements of the engineering fabrication method of Chinese Qing Dynasty. Each type of joints consisted of one intact joint and five artificial loose joints, and the artificial defect was made to simulate looseness by cutting the tenon sectional dimension. Based on experiments of two types of joints under low-cyclic reversed loading, the seismic behaviors of joints such as failure modes, hysteretic loops and skeleton curves, strength and stiffness degradation, and energy dissipation capacity were studied. Moreover, the comparative analyses of seismic performance between two types of joints were carried out. The variation tendency of seismic behaviors of two types of joints has similarities, and there are some differences due to their different structural styles. The results indicate that squeeze deformation between tenon and mortise of two types of joints occurred. The shape of hysteretic loops of two types of joints is reverse-Z-shape, and the pinching effect of hysteretic loops becomes more obvious with the increase in looseness, among which of through-tenon joints is more obvious than that of dovetail-tenon joints. The carrying capacity, stiffness, and energy dissipation capacity of loose joints are significantly lower than that of the intact one, and the energy dissipation capacity of dovetail-tenon joints is better than that of through-tenon joints. The rotation angles of two types of joints can reach 0.12 rad, and the loose joints still have great deformation capacity.

scholarly journals Analysis of the Seismic Performance of a Two-Span Specially Shaped Column Frame

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Zhen-chao Teng ◽  
Tian-jia Zhao ◽  
Yu Liu
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Performance ◽  
Compression Ratio ◽  
Peak Load ◽  
Frame Structure ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity ◽  
Specially Shaped Column

In traditional building construction, the structural columns restrict the design of the buildings and the layout of furniture, so the use of specially shaped columns came into being. The finite element model of a reinforced concrete framework using specially shaped columns was established by using the ABAQUS software. The effects of concrete strength, reinforcement ratio, and axial compression ratio on the seismic performance of the building incorporating such columns were studied. The numerical analysis was performed for a ten-frame structure with specially shaped columns under low reversed cyclic loading. The load-displacement curve, peak load, ductility coefficient, energy dissipation capacity, and stiffness degradation curve of the specially shaped column frame were obtained using the ABAQUS finite element software. The following three results were obtained from the investigation: First, when the strength of concrete in the specially shaped column frame structure was increased, the peak load increased, while the ductility and energy dissipation capacity weakened, which accelerated the stiffness degradation of the structure. Second, when the reinforcement ratio was increased in the specially shaped column frame structure, the peak load increased and the ductility and energy dissipation capacity also increased, which increased the stiffness of the structure. Third, when the axial compression ratio was increased in the structure, the peak load increased, while ductility and energy dissipation capacity reduced, which accelerated the degradation of structural stiffness.

Test Study on the Rigidity Degradation and Energy Dissipation of High-Strength Reinforced Concrete Columns with Central Reinforcement

2010 ◽  
Vol 163-167 ◽  
pp. 398-405
Author(s):  
San Sheng Dong ◽  
Zi Xue Lei ◽  
Jun Hai Zhao
Keyword(s):  
Energy Dissipation ◽  
High Strength ◽  
Concrete Columns ◽  
High Energy ◽  
Affecting Factors ◽  
Static Test ◽  
Test Study ◽  
Core Areas ◽  
Energy Dissipation Capacity ◽  
High Energy Dissipation

Based on the pseudo-static test of 6 high-strength RC columns with central reinforcement skeletons, this paper studied their hysterisis performance, degradation of strength and rigidity, and energy dissipation capacity, with the affecting factors analyzed. The result shows that the central reinforcement skeletons can compensate for the low plasticity and brittle failure susceptibility of high-strength concrete so that all the specimens have stable strength, slow rigidity degradation and high energy dissipation capacity at later stage of loading; the larger the core areas the higher the strengths and ductility of the specimens, but slightly faster the degradation of strength and energy dissipation capacity as compared with the specimens with smaller core areas; the spacing of ties, longitudinal reinforcement ratio of core area both influence the strength degradation and energy dissipation capacity of the specimens, but they have little effect on their strengths.

Experimental Investigations on the Seismic Behavior of Precast Concrete Columns with Novel Box Connections

2019 ◽  
Vol 14 (02) ◽  
pp. 2050007
Author(s):  
Xizhi Zhang ◽  
Shengbo Xu ◽  
Shaohua Zhang ◽  
Gaodong Xu
Keyword(s):  
Energy Dissipation ◽  
Bearing Capacity ◽  
Failure Mode ◽  
Seismic Behavior ◽  
Load Transfer ◽  
Precast Concrete ◽  
Hysteretic Behavior ◽  
Experimental Investigations ◽  
Test Results ◽  
Energy Dissipation Capacity

In this study, two types of novel box connections were developed to connect precast concrete (PC) columns and to ensure load transfer integrity. Cyclic loading tests were conducted to investigate the seismic behavior of the PC columns with proposed connections as well as the feasibility and reliability of novel box connections. The failure mode, hysteretic behavior, bearing capacity, ductility, stiffness degradation and energy dissipation were obtained and discussed. The test results indicated that the all PC columns exhibited the ductile flexural failure mode and that the proposed connections could transfer the force effectively. The adoption of novel box connections could improve the deformation capacity and energy dissipation capacity of PC columns. A higher axial compression ratio could enhance the bearing capacity of PC column with proposed connection but would significantly deteriorate the ductility and energy dissipation capacity. Finite element models were developed and the feasibility of the models was verified by the comparison with the test results.

Sign in / Sign up

Export Citation Format

Share Document