scholarly journals Vibration Signal Analysis of Chimney Blasting Based on HHT

2021 ◽  
Author(s):  
Sen Huang ◽  
Linna Li ◽  
Dongwang Zhong ◽  
Li He ◽  
Jianfeng Si
Keyword(s):  
Vibration Signal ◽  
Blasting Vibration ◽  
Feature Identification ◽  
Hilbert Huang Transform ◽  
High Rise ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Vibration Signal Analysis ◽  
The Impact ◽  
Instantaneous Energy

In the blasting demolition processs of high-rise structures, the impact of blasting vibration to the environment and objects to be protected must be effectively controlled, so the blasting vibration signal is deeply analyzed [1]. In this paper, the blasting vibration signal of a chimney is analyzedbased on HHT. The blasting vibration signal is denoised by Empirical Mode Decomposition (EMD)-wavelet threshold, then using Hilbert-Huang Transform (HHT) [2] the measured blasting vibration waveform Hilbert spectrum, marginal spectrum and instantaneous energy graph are draw to analyze the chimney blasting vibration. The results show that the denoising effect of EMD-wavelet threshold is good for blasting vibration signal [3]. HHT method has a good feature identification ability when processing vibration signals, and can reflect the characteristics of data more comprehensively and accurately, which provides convenience for the study of vibration signal data.

Vibration Signal Analysis and Fault Diagnosis of Gears Based on Hilbert Marginal Spectrum

2014 ◽  
Vol 909 ◽  
pp. 121-126 ◽  
Author(s):  
Jiang Ping Wang ◽  
Jin Cui
Keyword(s):  
Fault Diagnosis ◽  
Vibration Signal ◽  
Operating Conditions ◽  
Characteristic Time Scale ◽  
Intrinsic Mode Functions ◽  
Hilbert Huang Transform ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Vibration Signal Analysis ◽  
Non Stationary Signal

Hilbert-Huang transform is a new method of signal processing, which is very suitable for dealing with nonlinear and non-stationary signal. In this article, a gear fault diagnosis method based on Hilbert marginal spectrum is proposed in view of the non-stationary characteristics of gear vibration signal. First the original vibration signal is decomposed into several intrinsic mode functions (IMF) of different characteristic time scale smoothly by means of empirical mode decomposition (EMD) method. Then the Hilbert-Huang transform is carried out for IMF and the Hilbert marginal spectrum under different operating conditions are obtained. Gear faults can be judged through the analysis of the marginal spectrum. The experimental results show that this method can effectively diagnose the gear faults.

Application of Hilbert-Huang Transform to Vibration Signal Analysis of Coal and Gangue

2010 ◽  
Vol 40-41 ◽  
pp. 995-999 ◽  
Author(s):  
Wei Liu
Keyword(s):  
Signal Analysis ◽  
Vibration Signal ◽  
Intrinsic Mode Function ◽  
Frequency Interval ◽  
Hilbert Huang Transform ◽  
Mode Function ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
The Difference ◽  
Vibration Signal Analysis

In this paper, a new method of vibration signal analysis of coal and gangue based on Hilbert-Huang transform is presented. Empirical mode decomposition algorithm was used to decompose the original vibration signal of coal and gangue into the intrinsic modes for further extract useful information contained in response signals under complicated environment. By analyzing local Hilbert marginal spectrum and local energy spectrum of the first four intrinsic mode function components, we found the difference of coal and rock in specific frequency interval that the amplitude and energy mainly distributed at frequency interval between 100Hz and 600Hz when coal was drawn, while the amplitude and energy were more concentrated at 1000Hz or so when gangue was drawn. Furthermore, the further analysis result from marginal spectrum of each intrinsic mode function component agreed well with the conclusion above. So the extracted features with the propose approach can be served as coal and gangue interface recognition.

Blasting Vibration Signal Analysis Based on Hilbert-Huang Transform

2011 ◽  
Vol 474-476 ◽  
pp. 2279-2285 ◽  
Author(s):  
Dong Li ◽  
Fang Xiang ◽  
Hao Quan Liu ◽  
Tao Guo ◽  
Guang Hua Wu
Keyword(s):  
Vibration Signal ◽  
Blasting Vibration ◽  
Matlab Simulation ◽  
Base Function ◽  
Hilbert Huang Transform ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Signal Change ◽  
Vibration Signal Analysis ◽  
Non Stationary Signal

This paper introduces the empirical mode decomposition and Hilbert transform principle. The validity and superiority of Hilbert—Huang transform is proved by MATLAB simulation experiment on computer. Finally, HHT method is used to analyze the collected blasting vibration signal as an example. Research shows that EMD method can process this kind of non-stationary signal such as blasting vibration effectively. Each IMF component decomposed by EMD has clear physical meaning. IMF is determined by signal itself. It has no base function and is adaptive. It can extract main characteristics of signal change and is suitable for analysis of blasting vibration signal which has the features of fast mutation and attenuation. The distribution of time-frequency-energy can be quantitatively described by HHT.

Study on Vibration Signal Marginal Spectrum of Paper-Transferring System in Printing Press Based on EMD

2010 ◽  
Vol 139-141 ◽  
pp. 2464-2468
Author(s):  
Yi Ming Wang ◽  
Shao Hua Zhang ◽  
Zhi Hong Zhang ◽  
Jing Li
Keyword(s):  
Empirical Mode Decomposition ◽  
Optimization Design ◽  
Impact Load ◽  
Vibration Signal ◽  
Key Factors ◽  
Mode Function ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Periodic Signals ◽  
The Moment

The precision of transferring paper is key factors to decide the print overprint accuracy, and vibration has an important impact on paper transferring accuracy. Empirical mode decomposition (EMD) can be used to extract the features of vibration test signal. According to the intrinsic mode function (IMF) by extracted, it is useful to analyze the dynamic characteristics of swing gripper arm on motion state. Due to the actual conditions of printing, the vibration signal of Paper-Transferring mechanism system is complex quasi periodic signals. Hilbert-Huang marginal spectrum that is based on empirical mode decomposition can solve the problem which is modals leakage by FFT calculated in frequency domain. Through the experimental research, the phase information of impact load at the moment of grippers opening or closing, which can be used for the optimization design of Paper-Transferring system and the improvement in the accuracy of swing gripper arm.

scholarly journals Texture Feature Extraction Method for Ground Nephogram Based on Hilbert Spectrum of Bidimensional Empirical Mode Decomposition

2014 ◽  
Vol 31 (9) ◽  
pp. 1982-1994 ◽  
Author(s):  
Xiaoying Chen ◽  
Aiguo Song ◽  
Jianqing Li ◽  
Yimin Zhu ◽  
Xuejin Sun ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Recognition Rate ◽  
Texture Feature ◽  
Intrinsic Mode Functions ◽  
Hilbert Spectrum ◽  
Feature Extraction Method ◽  
Hilbert Huang Transform ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Bidimensional Empirical Mode Decomposition

Abstract It is important to recognize the type of cloud for automatic observation by ground nephoscope. Although cloud shapes are protean, cloud textures are relatively stable and contain rich information. In this paper, a novel method is presented to extract the nephogram feature from the Hilbert spectrum of cloud images using bidimensional empirical mode decomposition (BEMD). Cloud images are first decomposed into several intrinsic mode functions (IMFs) of textural features through BEMD. The IMFs are converted from two- to one-dimensional format, and then the Hilbert–Huang transform is performed to obtain the Hilbert spectrum and the Hilbert marginal spectrum. It is shown that the Hilbert spectrum and the Hilbert marginal spectrum of different types of cloud textural images can be divided into three different frequency bands. A recognition rate of 87.5%–96.97% is achieved through random cloud image testing using this algorithm, indicating the efficiency of the proposed method for cloud nephogram.

Application of Hilbert–Huang transform for vibration signal analysis in end-milling

2018 ◽  
Vol 53 ◽  
pp. 263-277 ◽  
Author(s):  
Agus Susanto ◽  
Chia-Hung Liu ◽  
Keiji Yamada ◽  
Yean-Ren Hwang ◽  
Ryutaro Tanaka ◽  
...  
Keyword(s):  
Signal Analysis ◽  
End Milling ◽  
Vibration Signal ◽  
Hilbert Huang Transform ◽  
Vibration Signal Analysis

Research on gearbox impact feature extraction method based on improved ESMD

2022 ◽  
Vol 64 (1) ◽  
pp. 20-27
Author(s):  
Fengfeng Bie ◽  
Sheng Gu ◽  
Yue Guo ◽  
Gang Yang ◽  
Jian Peng
Keyword(s):  
Feature Vector ◽  
Vibration Signal ◽  
Permutation Entropy ◽  
Significant Feature ◽  
Support Vector ◽  
Feature Extraction Method ◽  
Mode Decomposition ◽  
Envelope Spectrum ◽  
Impact Characteristics ◽  
The Impact

A gearbox vibration signal contains non-linear impact characteristics and the significant feature information tends to be overwhelmed by other interference components, which make it difficult to extract the typical fault features fully and effectively. Aiming at the key issue of how to effectively extract the impact characteristics, a fault diagnosis method based on improved extreme symmetric mode decomposition (ESMD) and a support vector machine (SVM) is proposed in this paper. The vibration signal is adaptively decomposed into multiple intrinsic mode function (IMF) components by the improved ESMD and then a certain number of components are selected with the maximum kurtosis-envelope spectrum index. The singular spectral entropy, energy entropy and permutation entropy of each component are applied to construct the feature vector set, in which the dimensionality of the set is reduced with the distance separability criterion. Finally, the dimension-reduced feature vector set is input into the SVM for pattern recognition. Dynamic simulation and experimental gearbox research show that the improved ESMD method can extract and identify gearbox fault information effectively.

Acoustic Signals Analysis Based on Empirical Mode Decomposition and Spectrum Analysis Technique

2010 ◽  
Vol 40-41 ◽  
pp. 91-95 ◽  
Author(s):  
Yan Li Zhang
Keyword(s):  
Empirical Mode Decomposition ◽  
High Frequency ◽  
Acoustic Signals ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Analysis Technique ◽  
Marginal Spectrum ◽  
Rock Interface ◽  
Coal Rock ◽  
Instantaneous Energy

A method to analyze the acoustic signals collected in fully-mechanized caving face is presented in this paper. Through analyzing the marginal spectrum and frequency spectrum of intrinsic mode functions obtained by empirical mode decomposition, acoustic signals’ frequency and amplitude characteristics are gotten, that is, high frequency signals about 1000Hz ~2800Hz are produced when the top coal is combined with gangue. Furthermore, the acoustic signals’ instantaneous energy spectrums in the frequency range of 1000Hz ~2800Hz can be used to identify the coal-rock interface.

Diagnosis of Ball Screw Preload Loss by Vibration Signals through the Hilbert-Huang Transform and Multiscale Measure

2011 ◽  
Vol 58-60 ◽  
pp. 636-641
Author(s):  
Yan Chen Shin ◽  
Yi Cheng Huang ◽  
Jen Ai Chao
Keyword(s):  
Machine Tool ◽  
Empirical Mode Decomposition ◽  
Vibration Signal ◽  
Ball Screw ◽  
Multiscale Entropy ◽  
Vibration Signals ◽  
Hilbert Spectrum ◽  
Hilbert Huang Transform ◽  
Mode Decomposition ◽  
Diagnosis Method

This paper proposes a diagnosis method of ball screw preload loss through the Hilbert-Huang Transform (HHT) and Multiscale entropy (MSE) process when machine tool is in operation. Maximum dynamic preload of 2% and 4% ball screws are predesigned, manufactured and conducted experimentally. Vibration signal patterns are examined and revealed by Empirical Mode Decomposition (EMD) with Hilbert Spectrum. Different preload features are extracted and discriminated by using HHT. The irregularity development of ball screw with preload loss is determined and abstracting via MSE based on complexity perception. The experiment results successfully show preload loss can be envisaged by the proposed methodology.

Sign in / Sign up

Export Citation Format

Share Document