scholarly journals Sensitivity analysis of the GTN damage parameters at different temperature for dynamic fracture propagation in X70 pipeline steel using neural network

2021 ◽  
Vol 15 (58) ◽  
pp. 442-452
Author(s):  
Abdelmoumin Ouladbrahim ◽  
Idir Belaidi ◽  
Samir Khatir ◽  
Erica Magagnini ◽  
Roberto Capozucca ◽  
...  
Keyword(s):  
Neural Network ◽  
Pipeline Steel ◽  
Fem Analysis ◽  
Maximum Load ◽  
Impact Testing ◽  
The Neural Network ◽  
Different Temperatures ◽  
Satisfactory Approximation ◽  
Artificial Neural Network Ann ◽  
Growth Of Voids

In this paper, the initial and maximum load was studied using the Finite Element Modeling (FEM) analysis during impact testing (CVN) of pipeline X70 steel. The Gurson-Tvergaard-Needleman (GTN) constitutive model has been used to simulate the growth of voids during deformation of pipeline steel at different temperatures. FEM simulations results used to study the sensitivity of the initial and maximum load with GTN parameters values proposed and the variation of temperatures. Finally, the applied artificial neural network (ANN) is used to predict the initial and maximum load for a given set of damage parameters X70 steel at different temperatures, based on the results obtained, the neural network is able to provide a satisfactory approximation of the load initiation and load maximum in impact testing of X70 Steel.            

A Model on the Correlation between Composition and Mechanical Properties of Mg-Al-Zn Alloys by Using Artificial Neural Network

2005 ◽  
Vol 488-489 ◽  
pp. 793-796 ◽  
Author(s):  
Hai Ding Liu ◽  
Ai Tao Tang ◽  
Fu Sheng Pan ◽  
Ru Lin Zuo ◽  
Ling Yun Wang
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Magnesium Alloys ◽  
Tensile Yield Strength ◽  
Data Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Prediction Of Mechanical Properties ◽  
Artificial Neural Network Ann

A model was developed for the analysis and prediction of correlation between composition and mechanical properties of Mg-Al-Zn (AZ) magnesium alloys by applying artificial neural network (ANN). The input parameters of the neural network (NN) are alloy composition. The outputs of the NN model are important mechanical properties, including ultimate tensile strength, tensile yield strength and elongation. The model is based on multilayer feedforward neural network. The NN was trained with comprehensive data set collected from domestic and foreign literature. A very good performance of the neural network was achieved. The model can be used for the simulation and prediction of mechanical properties of AZ system magnesium alloys as functions of composition.

scholarly journals Neural Network for Prediction of Curie Temperature of Two-Dimensional Ising Model

2021 ◽  
Vol 21 (1) ◽  
pp. 51-60
Author(s):  
A.O. Korol ◽  
◽  
V.Yu. Kapitan ◽  
◽  
◽  
...  
Keyword(s):  
Neural Network ◽  
Ising Model ◽  
Curie Temperature ◽  
High Temperature Phase ◽  
Square Lattice ◽  
Temperature Phase ◽  
The Neural Network ◽  
Different Temperatures ◽  
Low Temperature Phase ◽  
Ising Spins

The authors describe a method for determining the critical point of a second-order phase transitions using a convolutional neural network based on the Ising model on a square lattice. Data for training were obtained using Metropolis algorithm for different temperatures. The neural network was trained on the data corresponding to the low-temperature phase, that is a ferromagnetic one and high-temperature phase, that is a paramagnetic one, respectively. After training, the neural network analyzed input data from the entire temperature range: from 0.1 to 5.0 (in dimensionless units) and determined (the Curie temperature T_c). The accuracy of the obtained results was estimated relative to the Onsager solution for a flat lattice of Ising spins.

scholarly journals Neural Networks Applied to Estimating Subglacial Topography and Glacier Volume

2009 ◽  
Vol 22 (8) ◽  
pp. 2146-2160 ◽  
Author(s):  
Garry K. C. Clarke ◽  
Etienne Berthier ◽  
Christian G. Schoof ◽  
Alexander H. Jarosch
Keyword(s):  
Neural Network ◽  
Regional Scale ◽  
Ice Thickness ◽  
Ice Dynamics ◽  
Ice Caps ◽  
Mountain Glaciers ◽  
The Neural Network ◽  
Glacier Ice ◽  
Subglacial Topography ◽  
Artificial Neural Network Ann

Abstract To predict the rate and consequences of shrinkage of the earth’s mountain glaciers and ice caps, it is necessary to have improved regional-scale models of mountain glaciation and better knowledge of the subglacial topography upon which these models must operate. The problem of estimating glacier ice thickness is addressed by developing an artificial neural network (ANN) approach that uses calculations performed on a digital elevation model (DEM) and on a mask of the present-day ice cover. Because suitable data from real glaciers are lacking, the ANN is trained by substituting the known topography of ice-denuded regions adjacent to the ice-covered regions of interest, and this known topography is hidden by imagining it to be ice-covered. For this training it is assumed that the topography is flooded to various levels by horizontal lake-like glaciers. The validity of this assumption and the estimation skill of the trained ANN is tested by predicting ice thickness for four 50 km × 50 km regions that are currently ice free but that have been partially glaciated using a numerical ice dynamics model. In this manner, predictions of ice thickness based on the neural network can be compared to the modeled ice thickness and the performance of the neural network can be evaluated and improved. From the results, thus far, it is found that ANN depth estimates can yield plausible subglacial topography with a representative rms elevation error of ±70 m and remarkably good estimates of ice volume.

Artificial Neural Networks and Learning Techniques

2016 ◽  
pp. 89-112
Author(s):  
Pushpendu Kar ◽  
Anusua Das
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Research Work ◽  
The Neural Network ◽  
Learning Techniques ◽  
Learning Procedure ◽  
Processing Component ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The recent craze for artificial neural networks has spread its roots towards the development of neuroscience, pattern recognition, machine learning and artificial intelligence. The theoretical neuroscience is basically converging towards the basic concept that the brain acts as a complex and decentralized computer which can perform rigorous calculations in a different approach compared to the conventional digital computers. The motivation behind the study of neural networks is due to their similarity in the structure of the human central nervous system. The elementary processing component of an Artificial Neural Network (ANN) is called as ‘Neuron'. A large number of neurons interconnected with each other mimic the biological neural network and form an ANN. Learning is an inevitable process that can be used to train an ANN. We can only transfer knowledge to the neural network by the learning procedure. This chapter presents the detailed concepts of artificial neural networks in addition to some significant aspects on the present research work.

ANN-Based Wheat Chlorophyll Density Estimation Using Canopy Hyperspectral Vegetation Indices

2012 ◽  
Vol 500 ◽  
pp. 243-249
Author(s):  
Da Cheng Wang ◽  
Luo Rui Sen ◽  
Ji Hua Wang ◽  
Cun Jun Li ◽  
Dong Yan Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Statistical Method ◽  
Prediction Models ◽  
Vegetation Indices ◽  
Remote Sensing Data ◽  
Leaf Chlorophyll ◽  
The Neural Network ◽  
Spectral Vegetation Indices ◽  
Artificial Neural Network Ann ◽  
Traditional Statistical Method

Canopy leaf Chlorophyll Density is a key index for evaluating crop potential photosynthetic efficiency and nutritional stress. Leaf Chlorophyll Density estimate using canopy hyperspectral vegetation indices provides a rapid and non-destructive method to evaluate yield predictions. A systematic comparison of two approaches to estimate Chlorophyll Density using 6 spectral vegetation indices (VIs) was presented in this study. In this study, the traditional statistical method based on power regression analyses was compared to the emerging computationally powerful techniques based on artificial neural network (ANN). The regression models of TCARI 、SAVI 、MSAVI and RDVIgreen were found to be more suitable for predicting Chlorophyll Density when only traditional statistical method was used especially TCARI and RDVI. ANN method was more appropriate to develop prediction models. The comparisons between these two methods were based on analysis of the statistic parameters. Results obtained using Root Mean Square Error (RMSE) for ANNs were significantly lower than the traditional method. From this analysis it is concluded that the neural network is more robust to train and estimate crop Chlorophyll Density from remote sensing data.

Research of Intelligent Substation Condition Monitoring Based on the Neural Network

2013 ◽  
Vol 325-326 ◽  
pp. 692-696
Author(s):  
Da Peng Chai ◽  
Qiang Qiang Xue ◽  
Ling Mei Wang ◽  
Xing Yong Zhao
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Fault Diagnosis ◽  
Electric Power ◽  
Monitoring System ◽  
Condition Monitoring ◽  
Power Equipment ◽  
The Neural Network ◽  
Condition Monitoring System ◽  
Artificial Neural Network Ann

The substation electric power equipment condition monitoring is the basis of intelligent substation. This paper analyzes the composition of the substation electric power equipment condition monitoring system and monitoring parameters, and with the transformer condition monitoring as an example, this paper proposes fault diagnosis methods of electric power equipment using artificial neural network(ANN).

scholarly journals Analysing 21cm signal with artificial neural network

2017 ◽  
Vol 12 (S333) ◽  
pp. 39-42
Author(s):  
Hayato Shimabukuro ◽  
Benoit Semelin
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Power Spectrum ◽  
Machine Learning Techniques ◽  
Inversion Method ◽  
Observation Data ◽  
The Neural Network ◽  
Learning Techniques ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

AbstractThe 21cm signal at epoch of reionization (EoR) should be observed within next decade. We expect that cosmic 21cm signal at the EoR provides us both cosmological and astrophysical information. In order to extract fruitful information from observation data, we need to develop inversion method. For such a method, we introduce artificial neural network (ANN) which is one of the machine learning techniques. We apply the ANN to inversion problem to constrain astrophysical parameters from 21cm power spectrum. We train the architecture of the neural network with 70 training datasets and apply it to 54 test datasets with different value of parameters. We find that the quality of the parameter reconstruction depends on the sensitivity of the power spectrum to the different parameter sets at a given redshift and also find that the accuracy of reconstruction is improved by increasing the number of given redshifts. We conclude that the ANN is viable inversion method whose main strength is that they require a sparse extrapolation of the parameter space and thus should be usable with full simulation.

Prediction of Life of Compound Die Using Artificial Neural Network (ANN)

2014 ◽  
Vol 622-623 ◽  
pp. 664-671 ◽  
Author(s):  
Sachin Kashid ◽  
Shailendra Kumar
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Sheet Metal ◽  
Research Work ◽  
Fem Simulation ◽  
Fem Analysis ◽  
Ann Model ◽  
Sheet Metal Parts ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Prediction of life of compound die is an important activity usually carried out by highly experienced die designers in sheet metal industries. In this paper, research work involved in the prediction of life of compound die using artificial neural network (ANN) is presented. The parameters affecting life of compound die are investigated through FEM analysis and the critical simulation values are determined. Thereafter, an ANN model is developed using MATLAB. This ANN model is trained from FEM simulation results. The proposed ANN model is tested successfully on different compound dies designed for manufacturing sheet metal parts. A sample run of the proposed ANN model is also demonstrated in this paper.

Prediction of Detonation Pressure of Aluminized Explosive by Artificial Neural Network

2013 ◽  
Vol 641-642 ◽  
pp. 460-463
Author(s):  
Yong Gang Liu ◽  
Xin Tian ◽  
Yue Qiang Jiang ◽  
Gong Bing Li ◽  
Yi Zhou Li
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Optimal Condition ◽  
Detonation Pressure ◽  
Ann Model ◽  
Training Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Good Agreement

In this study, a three-layer artificial neural network(ANN) model was constructed to predict the detonation pressure of aluminized explosive. Elemental composition and loading density were employed as input descriptors and detonation pressure was used as output. The dataset of 41 aluminized explosives was randomly divided into a training set (30) and a prediction set (11). After optimized by adjusting various parameters, the optimal condition of the neural network was obtained. Simulated with the final optimum neural network [6–9–1], calculated detonation pressures show good agreement with experimental results. It is shown here that ANN is able to produce accurate predictions of the detonation pressure of aluminized explosive.

Sign in / Sign up

Export Citation Format

Share Document